BikerScout007

The gloves i got were so rough I talked the guy down to $90. But I've seen them go for more than twice that Sent from my LG-H872 using Tapatalk

Edited the main post to add some photos

I used 1/8 rivets everywhere.

Seeing some stitching is fine. It's very hard to see against the black suede anyway https://drive.google.com/open?id=0B5bU7TNBGsXOekVkamk2VG5temc

Send me pics when you got 'em Sent from my LG-H872 using Tapatalk

as was intended

Welcome to the party, pal!

No. Even if you aren't going for Lancer (and why not??), the boots still need to bear some resemblance to the screen used ones. So, wheat colored soles, single color, with some tread. They aren't too hard to find and not all that expensive

Very cool!

If you've already gotten your Scout approved, go ahead and request Pathfinder status: http://forum.bikerscout.net/index.php?showforum=13 As for photos, I would use a 3rd party site to host them. The Gallery really isn't the best place. We have limited bandwidth and the pics generally come out tiny. I use this one: https://postimages.org/

Welcome to the Squad buddy!

Congrats! Welcome to the Squad

Dremel has become the generic term for a rotary tool. Kind of like Kleenex for tissue. Sent from my LG-H872 using Tapatalk

As Tim said, Redkap is love/hate. It's cheap, easy to get and very hardy. But it doesn't breathe well. The cotton/polyester blend is very heavy. And you should order the Tall so you can get more room in the torso. The double zipper is also a huge bonus. According to the Costumes book, the screen scouts used a modified Avirex flight suit. I know those are pricey. And the ones available seem to have a lot of damn zipper pockets on them! So I would go cotton if you could. Loose, but not baggy. And certainly not form fitting like spandex. Color is black, not shiny. Just looking at the MOM scout and how the material wrinkles, it looks like a very light cotton: http://forum.bikerscout.net/index.php?app=gallery&image=102

I have the Dremel 200. It works fine for our purposes

That belt as-is is not going to clear basic. The rivets in the front disqualify it. the belt should only have two visible rivets, one on each side, in the back to hold the nylon webbing to the plastic belt. You just need to overlap the joins and E6000 them together. It works just fine. Then you can use some caulk to fill in the seam if you wish to go for Lancer.

That looks really great man. I think you are good to go

It has to be concave. Try these: http://forum.bikerscout.net/index.php?showtopic=10270

No don't do it. The tank is supposed to have a gap. In the film they are two distinct parts and the screen scouts' tank was attached to the back armor with an elastic strap. I have recreated that look with my own armor: In actuality, the rivets are there to connect the elastic strap to the back of the tank, they don't bond the tank and back armor together. You don't have to do yours this way. The only thing that matters is that it looks right. But do not seal the crack. That will prevent you from attaining Lancer status should you go for it.

Why don't you post a WTB thread in the Trade Forum? You can contact Studio Creations if you want to buy a piece from them

Whatever the thinnest pig suede you can get. You don't want to put your sewing machine through too much stress!

If the jacket doesn't work out, try this: https://www.tandyleather.com/en/product/glazed-pig-lining

Looks pretty good. I agree with Peter, could be a tad long.

Welcome Trooper!

If it's the one from RS, it bends pretty nicely. You just hot glue it on the sides, not the top. If you glue the top you may have difficulty getting the faceplate up