01Hawk

Excellent work so far!

I want to find a tailor to make me a new one .. I like the material from the CB one- the redcap is pretty thick. I want to try and get a somewhat lightweight one that will look the same. They sell patterns for making your own from scratch but I am not that skilled at sewing

There are a few posts that outline what needs to be modded. I didn't do one so unfortunatly I don't have experience in the mods. I did buy one tho and it was very very tight on the shoulders. I am 5'11" and I would prob get a " long" version (L) if I were to order one again.

The person behind KT is the * only * person listed in the Vendor Problems section of this board. Quality is nice however you run the risk of never getting it. He consistently lies.

That is a pretty nice sole on them. May be tough to get the fabric to lay smooth over the stitching and the ribbed part at the toe. Hope it works out for you because the cuts in the side are nice

Good job!

I basically squirted some on my fingers and wiped it on and just let it dry. One of the helmets was all streaky after that so I took a damp towel and wiped the streaks away and it was fine. I also had a pair of goggle like things for my Resident Evil costume which ALWAYS fog up and they were ok as well. Pretty simple yet very effective fix it seems. I used Dawn - forget it of it was blue or green as I have both out

I am totally ok with the costs. I compare the hobby to cars all the time. I enjoy racing but I have never gotten as many compliments / smiles out of people with a car as I do with the costumes. I actually prefer the hobby more now lol.

I thought I was going to come in around $1200 but ended up with 2 pistols and 2 Helmets, plus a tonnnn of various fasteners, Velcro and materials. I'm prob at $2k which is still nothing compared to my tanked Fett budget which I kept a spread sheet for to remind me how much it killed my bank account lol.

I tried the dish soap thing in my Fett and Scout a couple weekends ago. When I wore the scout the TFA premier it fogged up immediately in the parking lot and it was pretty cold out. I wore it to Katsucon where they evacuated everyone out into the streets for over an hour due to a fire alarm going off - it was prob 20some degrees - and I had put the Dawn dish soap all over the lense that morning and it did not fog. No fogging in my Fett either at any point. I was pretty happy with the results since fogging is annoying.

Unfortunatly not right now. I had been spending most of my time building a BoBa Fett which is almost done. I will be picking up making molds and casting stuff soon. I need to make molds for a bunch of Fett parts and start casting this other pistol to sell. It is easier to do a bunch of projects at once so I waste the least amount of material.

Mine is glued with E6000 as well which seems to hold up nice.

I think they come with instructions now didn't it? There isn't a single tutorial post here for them but there are lots of them mixed into various build threads. I started building mine by printing out blown up pics to reference while I worked ( could just have the computer up as well) and reading a tons of posts. Then I just winged it from there. Fit everything up before cutting/drilling with tape or magnets. Getting the sides to line up perfectly was the most challenging part for me.

With the helmets that are readily available I recommend Altmanns and SC to people. The SC is a bit lighter. I noticed it when I tried each in right after the other but got used to the Altmanns right away. Both vendors are great to deal with, don't lie about their time frames and care about the members here- and those things are important to me when you look at the services provided by others.

It doesn't have to be a one time use! Just start riveting stuff instead of using tape and glue!

Can't go wrong with Studio Creations!!!

The only ones I ever see there that would come close would be these http://m.target.com/p/men-s-mossimo-supply-co-rich-hiking-boots-tan/-/A-15713811

No problem . Mine isn't weathered but I would like to. I am holding off till I am approved and then will do it. Some people get really picky when it comes to too much/too little. Personally I really like how yours looks but it would suck to go through the trouble of weathering it up and being shot down for it being too dirty

I would join your local garrison and find out who will be approving your build and find out from them on the weathering... Better to be safe if that is your end goal.

I have a scout and am in the process of building a Supertrooper Fett. The scout is wayyyyyy easier than the Fett. I bought my scout kit ( SC) and have been sourcing most of my Fett parts. I do have to build the receiver for the one Gun and assemble both. I thought I would save money by not having to have the Regular Fett paint work. Scout I am under $2 k with learning how to do stuff and 2 helmets and 2 blasters. I am over $4k ( prob closer to $5k ) with the Fett and that doesn't include any paint work. The ease of building a Fett depends on how accurate you want it to be compared to a scout where you only have so many variables. As frustrating as both can be it is still an awesome hobby and when you get it right it feels good to get compliments on your build!!

I think I just upgraded my Velcro and stuff. I ended up buying a ton of elastic and various fabrics just because I was learning how to sew and stuff. I'm pretty sure most of what you need is there and satisfactory. I followed Pandas build and others and just took my time

Griffin's advice is right on..

no response yet but I will post it as soon as I get one! I did see a pic of the Scout without a helmet and his looks to be 2 piece just don't have a hi def cap. This topic has def been beaten to death in prior posts so I can get the frustration. My interest is out of pure curiosity and it is odd that there are people who have handled the costume that can't just provide a simple answer. Not like it is some huge government secret. But you see stuff like this on the Fett boards where people know stuff and refuse to divulge simple information.

No shows listed on his Facebook so I messaged his booking agent. Figured I had nothing to lose ..

Next con he is at on the east coast I am there and asking him! Nothing says cool like asking a man about his diaper.