Jump to content

Pyro's Treadspeeder Driver


Recommended Posts

2 minutes ago, Pyro said:

I just want to make sure I'm getting the correct ones.

Those look great.  Definitely meet the criteria of "Alpinestar-styled motorcycle sport/racing boots"!

Link to comment
Share on other sites

9 minutes ago, Pyro said:

I just want to make sure I'm getting the correct ones.

This is the exact boot, but the ones you have are very similar and would look almost exactly the same once the shin was in place.

https://www.revzilla.com/motorcycle/alpinestars-smx-6-v2-vented-boots?gclid=Cj0KCQjw4uaUBhC8ARIsANUuDjWHrIVkVEeB8Iau6iK4iF3Mnv-TPtRkXFxiZDSo4GPJfWt9fnHB6JYaAtzTEALw_wcB

Link to comment
Share on other sites

On 6/3/2022 at 8:10 PM, MrPoopie said:

Those should work. Just get some shoe/leather paint and you'll be set. I used the stuff below and it took a couple of bottle and something like 5 coats to cover everything sufficiently. You'll also need at least 2 coats of the clear gloss afterwards.

https://smile.amazon.com/Angelus-Acrylic-Leather-Paint-White/dp/B0196T961O/ref=sr_1_5?keywords=white%2Bleather%2Bpaint&qid=1654308490&sr=8-5&th=1

https://smile.amazon.com/Angelus-Acrylic-610-Finisher-Gloss/dp/B018R47K94/ref=sr_1_6?crid=304DT79COQNLB&keywords=clear+gloss+leather+paint&qid=1654308576&sprefix=clear+gloss%2Caps%2C152&sr=8-6

Will one 4 oz bottle do or do I need more then that?

 

Link to comment
Share on other sites

57 minutes ago, Pyro said:

Will one 4 oz bottle do or do I need more then that?

 

That should work. I think we went through almost 3 - 1oz. bottles of white and 1 - 1oz. of the gloss.

  • Like 1
Link to comment
Share on other sites

  • 4 months later...

So I have decided to step away from this project. I will be selling the armor and gaskets so I can make a Shoretrooper Specialist. The Empire is WAY better anyways. :) So I will still be around asking questions 

  • Sad 2
Link to comment
Share on other sites

Ah you make me sad!  

Okay @JollyRajR -- you're our only hope!

Link to comment
Share on other sites

39 minutes ago, Pyro said:

You know what screw it I can just do both! I have way to much of it not to finish it.

 

You're a champ!

Link to comment
Share on other sites

18 hours ago, Pyro said:

You know what screw it I can just do both! I have way to much of it not to finish it.

 

That's the spirit.

  • Like 1
Link to comment
Share on other sites

  • 1 month later...

Nice!   @MrPoopiemight have some stuff for you. 

Link to comment
Share on other sites

9 minutes ago, Pyro said:

So a small update! I bought am Ender 3 so I can print the stuff I need.

Hit me up if you need any files. 

  • Thanks 1
Link to comment
Share on other sites

7 hours ago, MrPoopie said:

Hit me up if you need any files. 

 

Plus one for shin and knee files pretty please

 

 

 

 

 

  • Like 1
Link to comment
Share on other sites

  • 3 weeks later...

Ok since I have a 3D printer now I figured I should print myself a new helmet, I don’t like the way my current one looks. So does anyone know where I can find accurate TLJ helmet files? 

Link to comment
Share on other sites

Can't say I've seen any really decent files, nothing that has been approved, but that's not saying they aren't out there. Most have either been using the Anovos or converting Black Series helmet. Denuo Novo helmets are apparently shipping or close to.

Just watch out for the obvious differences, clip size/detail, recess area, taller nose/pointier and 7 teeth.

helm1.png.0a7885895ddc438abea116a7ee78ad08.png

helm2.png.71dbc3691ff25807214c57b4074b850b.png

I use the propstore images for reference when comparing https://propstoreauction.com/lot-details/index/catalog/138/lot/28672

Just a quick search and this popped up, doesn't look too bad at a quick glance https://www.cgtrader.com/3d-print-models/art/other/star-wars-the-last-jedi-tlj-storm-trooper-ep8-helmet

Here's one a few have been printing on FISD https://www.cgtrader.com/3d-print-models/art/other/star-wars-tlj-storm-trooperhelmet-chest-shoulder-armour-ep8 but most that have printed the armor have converted Black Series helmets

 

 

 

  • Thanks 1
Link to comment
Share on other sites

  • 3 months later...
9 hours ago, Pyro said:

Went ahead and picked up this helmet file, hopefully it turns out ok. 
https://www.cgtrader.com/3d-print-models/art/other/star-wars-the-last-jedi-tlj-storm-trooper-ep8-helmet

@gmrhodes13 any familiarity with this helmet?

Link to comment
Share on other sites

4 hours ago, BikerScout007 said:

@gmrhodes13 any familiarity with this helmet?

This maker also has the files for the full armor which some have printed over at FISD, personally helmet looks ok, nice clip sizes and recess.

  • Like 1
  • Thanks 1
Link to comment
Share on other sites

  • 5 months later...
7 hours ago, Pyro said:

So I might be swithcing this to the CGI version as I really dont like the motorcycle boots. They will be very uncomfy to troop around in.

 

Alright that's a lot taller of an order since there are some significant differences between that one and the real life one.  Happy to help you along, but it is almost a different CRL.  If that's how you want to go, we can proceed!

  • Like 1
Link to comment
Share on other sites

  • 7 months later...
1 minute ago, Pyro said:

Ok I am picking this back up and I am going to finish it! I am willing to do either version of this kit.

Did you just see the video?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...