Aradun

I’ll second the Velcro. It’ll allow for a little more flexibility in placement and adjustment than magnets and Scouts tend to be a little more active on troops due the ease of movement and flexibility (I know I am). No worries about an armor piece getting hung up on something and popping off with magnets.

Excellent work! Keep it up!

Looking forward to seeing your progress! Let us know if you have any questions along the way. We’re always happy to help!

Brilliant indeed. That was way too simple a solution, which is why I didn’t think of it. 🤣 That’s why you get paid the big bucks around here! Thanks Corey! I’m filing that one away in my bag of tricks for future inquiries.

Responses to your questions are in bold in your quote above.

Given that you also use the flight suit for your TIE, Velcro isn’t really an option. You could try using rate earth magnets. Use E6000 to secure a magnet to the inside of the flight suit and another magnet on the knee armor. Just make sure that the placement of the magnets doesn’t interfere with your ability to bend your knee without pulling the magnets apart. I’d first test gluing a magnet to the inside of the flight suit around the calf where it will be covered by the boots of both costumes to make sure that the glue from the e6000 doesn’t bleed through or mar the outside of the suit.

Nes, just a note for when you’re trooping. Don’t wear the balaclava over your mouth and nose. You’ll fog up the inside of your lenses super fast that way.

For the flight suit, figure how much you want to take the legs in, turn it inside out and run a stitch down the outside of the leg that tapers from the waste down to the opening at your foot. Turn it right side in and you’re done.

Excellent choice! I do like my EF gloves waaay better than my Wompas. Nice work!

Modifying the helmet to include voice and ventilation is tough with this helmet as designed. The ear holes are not open whereas traditional Scout helmets have open ears which allows for plenty of circulation, so much so, that most of us don’t need internal ventilation like fans. You would need to install fans in the bucket but there wouldn’t be much room because the walls of the helmet are much thicker, and so circulation would likely be limited. As to voice mods, the easiest way to go would be a Bluetooth speaker with headset. You could wear the headset and tuck the speaker in your pouches. The benefit of the Bluetooth headset is that you avoid having to run wires from the headset to the speaker. But again a bulky headset may prove to be a challenging fit due to the structure of the bucket. Hope that helps. Perhaps some can chime in on options for fans that have smaller profiles.

Congrats Scott! Well done Pathfinder - a Superb build!

Looking good Conor. It looks like all that Advanced Recon you put in has paid off. You’ll have no issue with glove flare for those Wampa gloves. No one has ever had to adjust them for basic or lancer. You good in that regard. As to the snout piece and Ukswrath. He should have provided you with the aerator piece. All you’ll need is a new backing plate as the RS one is all one piece construction. To make a new backing plate grab a sheet/piece of ABS and use the RS plate to trace out a new plate. Drill a hole for the mic wire, attach the aerator piece with the mic. Paint it gray and then remount it to the faceplate of the helmet with some outdoor double face 3M mounting tape. That’s it. Pretty easy. Let us know if you have any other questions. We’re here to help!

Patterns for the pouches along with a tutorial can be found d here: https://forum.501stpathfinders.com/topic/19200-pouch-dimensions-and-patterns/ Removable or attached is a matter of preference. Either way will work.

A DIY boot build will likely be your best bet, but the challenge will be finding boots with a solid wheat colored sole as opposed to a two tone sole. They’re becoming scarce. Your major boot brands are likely to have wide options, but if you’re a EE then that’s adding another layer to the challenge. These Cat’s are available in a wide. They’re pricey, but still under what you’d pay for a pair made by CrowProps. The vinyl will run about $25 and the E6000 maybe $10. https://www.amazon.com/Caterpillar-Mens-Shift-Plain-Honey/dp/B000AMUPFS?ref_=ast_sto_dp&th=1&psc=1 If those don’t work because you need an EE, then you may need to find something that fits with an acceptable sole and then paint the sole wheat colored. We can help with that, as scouts have done that before. The tutorial to make your own boots is here:

Welcome Toby! Make sure to do your homework if you’re planning to print your armor. Not all vendors sell files that are approvable. If you have any questions or want to run anything by the armory team prior to purchasing where here for you.

Looking forward to watching your journey to approval unfold. Let us know if you have any questions along the way. We’re here to help you get across the finish line!

Wickedly cool! Love it!

@Chopper do you this info. My kit is packed away at the moment. Won’t be trooping until April.

Correct. The straps should be in between. But use the marks indicated by Chopper even though you raised the knee armor slightly. In other words, you don’t need to raise the straps higher because you adjusted the knee armor higher. Chopper’s placement is the ideal spot.

Even with you raising your knee armor slightly, you should still move the thigh straps to where Chopper indicated in the photo above.

I used E6000 and have had no issues with the bond. Not sure if that’s available in China or what the equivalent would be if it isn’t. I don’t think CA glue would hold over time.

Here’s how I did mine: The magnets in the scope are recessed flush. The magnets on the DLT are glued to the surface.

Sweet!

Correct.

So, your patches are the back suede or faux suede area on the flight suit. Their current placement is fine. It’s okay if the patches extend a little underneath the knee armor. The CRL states that they end above the knee, meaning your physical knee, NOT your knee armor. As for the curve, the CRL doesn’t specify that the curve of the patches needs to match the curve of the cod piece. Your bund, belt, and cod have room to come up an inch or two. Once you dial in the placement of the bund, belt, and cod everything else will fall into place. You just need to round the hard corners of the patches as indicated above. If you look through Gloria’s thread, you’ll see a post from Chopper on April 20 with a green line indicating where the corner should be rounded. Gloria was using chalk to mock up the patches so she could make a pattern. The elastic straps merely need to be moved up so that they sit half way between the top of the knee armor and your drop boxes. The butt flap in the back just needs to be removed and raised to where Chopper indicated in the photo. That’s it. Easy fixes. I hope that I’ve cleared things up for you. If not let me know. Where here to help!