Aradun

Awesome job on the boots. They look and fit great! Well done!

Here’s to a fabulous job, well done, Jenn! Thanks for setting the standard. Congrats Sarah! I’m sure your passion for the PFD and Recon Fatale will translate into some awesome PR for both.

I agree with Dart. Those boots shouldn’t pose any issue.

First impression? The orange on the right. I looked at mine and they’re closer in color to the orange than the red. If you’re in doubt run it by your GML.

Wickedly awesome! Love it!

Sweet! Great to see the ranks of the JFO scout grow! I’m sure this will be a fantastic build after seeing your detailed work on your ROTJ Scout. As always, hit us up if you have any questions along the way.

Unfortunately, there are a lot of good STL files and vendors who print parts, but no one that I’m aware of who is currently offering a finished model. As mentioned above, stay away from Imperial Arms on Etsy.

Check out Praetorian Blasters on FB. Over the summer they were consulting with PFD when developing molds for a EC17 holdout and DLT19X. Not sure the status of the 19X but wouldn’t hurt to check them out. https://www.facebook.com/BlasterMaker @postmortem01 any update on the DLT19X

A set just popped up on EBay today: https://www.ebay.com/itm/296796045707?mkevt=1&mkpid=0&emsid=e11021.m164380.l178264&mkcid=7&ch=osgood&euid=2ed46e96eb9942478a1ae9868e7e64df&bu=43415781740&ut=RU&osub=-1~1&crd=20241105062210&segname=11021&recoId=296796045707&recoPos=1

Congrats! Well done!

There doesn’t seem to be much of a selection at Amazon.ca, and it’s becoming increasingly harder to find traditional works boots with the wheat colored sole even here in the US. If you’re look at $90 for a pair a boots, for a little more, an alternative would be to snag a pair of Crowprops base boots for around $100 + shipping and use them to construct your own.

I think they’d work for level 1, but the sole is much thicker than the typical work boot and those huge cutouts designed to clear mud from the sole might make it difficult to get the look right for the cutouts required for level 2. I’ll defer to @Chopper for any final say.

Here what you want, but try to find your piece otherwise you have to by a whole new skin. I don’t think Tandy sells anything smaller. https://tandyleather.com/products/soft-suede-pigskin-split?_pos=1&_sid=bea47dafd&_ss=r

Congrats!

Looking forward to seeing your build as the Mountain Trooper is a rare build indeed. The armory team is here if you have any questions.

Yep. That’ll work fine.

I do. I’ve made one modification since the original install. The original speaker is a 1 or 2 watt speaker that sits in a custom snout piece. I’ve had two of those speaker fail over the years so I bought a 5 watt Speaker and installed it in the back of the bucket recessed in the hump. It’s way louder and has eliminated occasional feedback issues from the mic being close to the original speaker mounted in the snout.

Ukswrath audio for the scout helmet. Available at his store on Etsy. Everything is contained in the helmet.

If you’re unable to contact him through Etsy, try reaching out to the German Garrison. I believe he’s a member. @TreeHuggerMatt do you know his full name?

@Aesmodan surfinbird’s model has two different barrel pieces. One with a bipod mount if you’re going for the DLT19 heavy blaster and one without the bipod mount if you’re going for the DLT19X sniper version with scope. Whatever you do don’t go bipod AND scope. That configuration will not pass with your GML. The A1 has a 10” build plate so you should be okay, but you may want to pick up the files first to see if any of the pieces may be too large for your build plate, which would require them to be cut.

Are you looking for files that you can print yourself or are you seeking to buy a printed kit online? If you’re looking to print your own get the following: https://cults3d.com/en/3d-model/game/star-wars-dlt-19x-blaster-mg-34 It’s a great print and you can’t beat the price.

Congrats Scout! Great photos too!

Welcome! For posting pics, the allotment for photos is very small for each member on the forum to help keep operating costs down. Don’t compress the files, as the armory team will be unable to see details if needed. You can use an image hosting site like Imgur or the free Tapatalk app for your smartphone. Here are some additional details on posting pics: https://forum.501stpathfinders.com/topic/23053-faq-how-do-i-post-images/ Looking forward to seeing your progress pics!

If you’re not handwashing it, then yes, turn it inside out, especially if you have Velcro attached to it.

His DLT19X will clear when properly assembled and painted. It’s a good model.