Chopper

Even with the knees dropping a bit, I still think the boots are too long. Measure out a point that's 3" from the top of the boot, then take some of that blue painters tape and put the top edge of the tape on the 3" marker. Then take a photo with your flight suit and knees on. That'll show if it's about the right height or not.

Good work with your progress. A few points -- It looks like your pouches are attached to your chest plate? You might want to consider attaching them to your bund, They'll sit flatter and more naturally that way. Sorry to have to say this, but your boots will likely need some alterations prior to clearance. I'm just eyeballing the height, but I'd say maybe 2.5"-3" needs to come off the top. Again sorry to have to point that out, but I imagine that your GML would mention it when it came time for submissions as well. Keep up the good work.

Looks good.

You have a few options, depending on your budget: @Chrisx909x sells boots and soft goods, here: Gio from CrowProps sells boots: https://crowprops.bigcartel.com/product/biker-scout-long-boots-white-with-accurate-soles Chef in the UK sells boots: https://chefscreations.co.uk/ And if Lancer/Level 2 is not something you're concerned with, you can look at KeepTrooping: https://keeptrooping.com/product/biker-white/

Good work on your boots. And yes you're correct that the boot build tutorial pre-dates that clarification on the CRL. You already know this but always, always check the CRL for the most current information.

For the most up to date info you could ask RS directly to see what their current pouches look like.

Here's the thread:

Also, if you bought the soft goods with the full commission, then you'll get the Keep Trooping soft goods that RS sources. There's a potential that you get yellow pouches. I'm not sure if they're using those still but they are an issue for clearance. I'll try and find the thread about them.

No complete build is necessarily approvable out of the box. The need for further tailoring and adjectives will entirely depend on how it fits your body. If you post up some photos when you first put it on, then we can advise. As for the drop box strap question, the CRL says: "Drop boxes connect to the belt via white textile straps" The elastic is acceptable for Level 1 clearance.

Those boots and the sole color should work fine.

I would reach out to Mr. Poopie to get his files.

That photo is not mine, it's from the thread posted evaluating the model: When we looked at the reworked model our assessment was that it would pass basic clearance, though quite honestly, the model is still not great. I suggest you reach out to user @LookBehindYou if you need firsthand experience with any modifications to the model.

The specifications for the Mando Scout neck seal are fairly general, so a TK neck seal should work just fine. Neck Seal Black with horizontal ribs. Conceals the entire neck. Fitted to the wearer.

BTW Darman makes a very comfortable neck seal: https://www.etsy.com/listing/642686929/stormtrooper-neck-seal

You can see a finished photo of the GA holster in this photo: The holdout blaster is not very big and you should not expect to fit your whole hand through it. See reference image from ROTJ, below.

Well, we do want you to attach images as a part of your WIP, it's just that you'll need to use a hosting service to do so.

Note that we do not have unlimited photo hosting on the forums, so, for full size images, you'll have to use a hosting service. See this thread for more info: https://forum.501stpathfinders.com/topic/23053-faq-how-do-i-post-images/#comment-216514

Palladium used to make a gumsole version. That said, cutting the slots in the palladium soles is also very difficult, if not impossible, particularly around the heel area. There isn't enough material to cut into. I know this because I tried it once upon a time. Also there's two large bars on the bottom of the boots that should be removed as well. If you're understandably not willing to go with Gio's boots due to the cost, and the only reasonably priced local options are two colored, then your remaining option is to paint the sides of the boots.

Good luck Arne!

You'd have to clarify with Walt, but I was under the impression that he was still going to offer his old scout armor for Mando builds? His new helmet is a Lone Wolf, which is much better than his banned V1 helmet. And just for the record -- the V1 helmet was not used in the TV show.

Correct. The patches are even in the CRL photos: https://databank.501st.com/databank/Costuming:Scout-Trooper-The-Mandalorian

I can tell you just to get the flightsuit and gloves from Wampawear.

Hiya, you seem to have done your research as you have most of the vendors listed on your spreadsheet. Are you still deciding on who to go with for armor and other soft goods?

Yes that's correct. I also recall someone reaching out to HI Tec and there was no interest in a reissue. Short of stumbling on the exact size and model on ebay, the crow props base boot style is the best we have available.

Congrats on your approval. Don't forget to request Pathfinder access: https://forum.501stpathfinders.com/forum/162-access-requests/