Jump to content

DLT-19x


Recommended Posts

Looking to buy a DLT-19x for trooping. 

Ok with a kit to assemble. I don't see any on the forum vendor page for sale. 

Anyone know a great place to start? Any good prop shops create one?

 

File:Generic-dlt19x.jpeg

  • Like 1
Link to comment
Share on other sites

There used to be more options a few years ago -- diamond state props, hyperfirm, praetorian. Sadly I don't believe any of them are active any longer.

I can't recall, do you have access to a 3D printer, or no?

Link to comment
Share on other sites

A few in my local Parjai squad in Florida Garrison do.

Link to comment
Share on other sites

I did find this place.

I contacted them and they see the DLT 19 and DLT 19x as a kit, clean and weathered as reasonable priced. Also sell an EC 17.

May want to add add Imperial arms to the list of vendors for weapons. 

https://www.imperialarms3d.com/product-page/star-wars-custom-reinforced-blastech-dlt-19x-long-barreled-sniper-rifle

Link to comment
Share on other sites

Hello there! I‘ve bought an E11 last year and I can say that the quality out of the Box is ok. As I remeber they offer different finishing. I chose the clean version and still have to get rid of the print lines. Communication was good! Later I bought an E11 bapty at https://www.3d-props.com/ and the quallty straight out of the Box was much better and it felt much more sturdy. Unfortunately they don‘t offer a Printservice at the moment only the files.
All does not have to apply for the DLT, just wanted to give you my impressions. I can send you pictures via PM if you want.


Gesendet von iPhone mit Tapatalk

  • Like 2
Link to comment
Share on other sites

Well I can post the pictures here to Show you what I mean. The first is imperial arms and the second one 3D Props. Imperial Arms came in one piece and the other one disasambled. Both Need work but in direct comparisson the 3D Props is better. Especially because the detailed parts are casted in resin and therefore much more realistic. As I said regarding the e11!

b69226321faefe4e95b770b565f317d1.jpg

6e9675c4bd59b1a77f005796ce08dc6c.jpg


Gesendet von iPhone mit Tapatalk

  • Thanks 2
Link to comment
Share on other sites

I think the best way would be to buy a DIY kit because you need to sand and fill it anyway…


Gesendet von iPhone mit Tapatalk

Link to comment
Share on other sites

This is the almost finished 3D Props Bapty btw

58fceb341adb2c380b87c4ed6b2b59a8.jpg


Gesendet von iPhone mit Tapatalk

  • Like 1
Link to comment
Share on other sites

4 hours ago, OnkelPaschulke said:

Well I can post the pictures here to Show you what I mean. The first is imperial arms and the second one 3D Props. Imperial Arms came in one piece and the other one disasambled. Both Need work but in direct comparisson the 3D Props is better. Especially because the detailed parts are casted in resin and therefore much more realistic. As I said regarding the e11!

b69226321faefe4e95b770b565f317d1.jpg

6e9675c4bd59b1a77f005796ce08dc6c.jpg


Gesendet von iPhone mit Tapatalk

Thanks for the input.

The prices are good, but I definitely don't want to battle print lines if I can avoid it. Worth a little more money for less work and quality.

Resin is a little more fragile though right?

  • Like 1
Link to comment
Share on other sites

Depends on the thickness of the resin part. But as you can see on the hengstler Counter of my finished bapty there is a crack and that‘s because I screwed in the screw which fixes the counter to the rail a little bit so far…

But let me tell you one thing, filling and sanding can be very meditative! :-D


Gesendet von iPhone mit Tapatalk

Link to comment
Share on other sites

"Meditative" yes I see.

I have enjoying sewing and slowing waddling my armor into shape. 

Link to comment
Share on other sites

Chris, it’s a little more work and effort, but I second the “buy a DIY kit.” Not only will it save you some cash, but it’ll be waaay easier to sand and properly finish than a “finished kit.” Grab yourself some XTC-3D to smooth out the print lines and it will cut down on sanding immensely. Of course if you can get some mates in your Garrison to print one out for you and pay them for material and time, you might be able to save even more.

https://smile.amazon.com/XTC-3D-High-Performance-Print-Coating/dp/B01BKSLI9M/

Here’s the free DLT19X files I used from Thingiverse:

https://www.thingiverse.com/thing:3940279

It include the bipod for the DLT19, but if your going for the 19X then you just want to make sure you print out the barrel piece that does NOT have the bipod mount, as there is no bipod on the 19X.

Here’s photos of my DLT19X. You can see how smooth you can get the finish to look when you use XTC-3D.

5220da37153d2186b3ebd3d37959ed28.jpg
df24ea419e8c94ac1f8a7f300db12066.jpg
 

EDIT: 2023/03/26

The creator of the STL files pulled them from Thingiverse sometime last year and now has them posted for a very nominal fee on Cults3D.  Absolutely worth way more than the $4.34 he charges now.

https://cults3d.com/en/3d-model/game/star-wars-dlt-19x-blaster-mg-34

  • Like 7
  • Thanks 1
Link to comment
Share on other sites

I‘ve just started printing the DLT with these files. Just something for in between… :-D


Gesendet von iPhone mit Tapatalk

  • Like 1
Link to comment
Share on other sites

  • 2 weeks later...

Just a bit of warning... I bought a Hold out blaster from Imperial Arms. It took forever to arrive and when it did it was horrible. It was hollow and unfinished. The scale was off as it is to small (Even for a hold out blaster). The paint was terrible and it was all around flimsy. I was very disappointed and glad i didn't purchase something bigger like a DTL. A few of the guys in my garrison said they had similar problems and would not buy from them. 

Granted... I have only dealt with them the one time. Unfortunately, once is enough

 

In the end. A friend of mine has a amazing 3-D printer and he printed a DLT-19x for me and it came out amazing. I'm finishing up the painting hopefully this week.

Best of luck to you! 

  • Like 1
  • Thanks 2
Link to comment
Share on other sites

Thanks for that feedback on Imperial Arms, Justin.

  • Like 1
Link to comment
Share on other sites

  • 2 months later...
On 10/8/2021 at 10:54 AM, AradunFF said:

Chris, it’s a little more work and effort, but I second the “buy a DIY kit.” Not only will it save you some cash, but it’ll be waaay easier to sand and properly finish than a “finished kit.” Grab yourself some XTC-3D to smooth out the print lines and it will cut down on sanding immensely. Of course if you can get some mates in your Garrison to print one out for you and pay them for material and time, you might be able to save even more.

https://smile.amazon.com/XTC-3D-High-Performance-Print-Coating/dp/B01BKSLI9M/ref=mp_s_a_1_2_sspa?crid=27TV06TBWPASO&dchild=1&keywords=xtc+3d&qid=1633707798&sprefix=xtc&sr=8-2-spons&psc=1&smid=A3AS28VK1N7A2B&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExQjhXVDFFSUxWSTgmZW5jcnlwdGVkSWQ9QTA1MjI5NTUyRlpOTFFXV0RSMzRRJmVuY3J5cHRlZEFkSWQ9QTA0MTQxMjQySjdFRjI0TDIwMkdJJndpZGdldE5hbWU9c3BfcGhvbmVfc2VhcmNoX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=

Here’s the free DLT19X files I used from Thingiverse:

https://www.thingiverse.com/thing:3940279

It include the bipod for the DLT19, but if your going for the 19X then you just want to make sure you print out the barrel piece that does NOT have the bipod mount, as there is no bipod on the 19X.

Here’s photos of my DLT19X. You can see how smooth you can get the finish to look when you use XTC-3D.

5220da37153d2186b3ebd3d37959ed28.jpg
df24ea419e8c94ac1f8a7f300db12066.jpg

Is this done using the PDF files you provided?

I found a local trooper who also has a 3D print shop side hussle who is going to try out the files for me. 

Link to comment
Share on other sites

Hey Chris, I’m not sure what you mean by PDF files, but the STL files from the Thingiverse link provided above are all you’ll need to get the DLT19X printed. The trooper printing them for you will need to get those files ready for printing in a program like Cura by slicing and creating a gcode file that the printer uses in the print process, but he’ll know how to do that if he has a side business doing 3D prints. If I’m missing something here just let me know and I’ll clarify.  

Link to comment
Share on other sites

Just checking to see if the pics you posted are using these files?

Link to comment
Share on other sites

Just checking to see if the pics you posted are using these files?

Yep! The two photos I provided above are of my DLT19X which I printed using the files from the Thingiverse link in that post.
  • Thanks 1
Link to comment
Share on other sites

I do like the detail of 3Dprint over the Happy Trooper build.

Also carrying a friend's Happy trooper this weekend so I'll see the weight difference.

Link to comment
Share on other sites

  • 5 months later...

Finally starting the process. 

Didnt want to pay an arm and a leg for my rifle. Got a friend to print at cost. 

So the 3d print begins. Will follow ArandunFF's build thread for the how to. 

 

  • Like 1
Link to comment
Share on other sites

Hit me up if you have any questions Chris.  I’m happy to help anyway I can. Looking forward to seeing things come together for you.  

  • Thanks 1
Link to comment
Share on other sites

I assume it has to be solid black? Was wondering about a wood look stock as the original MG34.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...