jwnikita

So more paint then for Lancer? Sent from my iPhone using Tapatalk

Yeah. Haven’t seen that requirement listed in the CRL. If it should be a certain height up the edges, it should be stated in the CRL. It would be helpful. Sent from my iPhone using Tapatalk

Where is that requirement? Sent from my iPhone using Tapatalk

Cleaned up the edges as best we could. https://drive.google.com/file/d/1qYkK-h8enLCviOCTy5imSyLU1fnzZLlj/view?usp=drivesdk https://drive.google.com/file/d/1LSyB5ry-PE8Y-p0ASQ8C-ohIX0CNNqHB/view?usp=drivesdk Sent from my iPhone using Tapatalk

Got it, so inch wide elastic but as wide as the ABS is at the shoulder. Is that correct? Sent from my iPhone using Tapatalk

Is it just me or are all of these covers so far longer than 1 inch? I guess that is where most of my confusion lies. I believe the gap between the two shoulder joints should be no more than an inch, but does that go the same for the material that covers it? Sent from my iPhone using Tapatalk

Hmmm. I llike that idea. Sent from my iPhone using Tapatalk

It is. I did the best I could with my limited vision. Gotta enlist TK Hubby to get it better. Sent from my iPhone using Tapatalk

Trying to get a better idea of what the bridge and covers should look like, and what ideas and materials others have used. Can you share with me please? Thanks!

Giving what I have done so far a test fit with a spare suit. How does it look so far? https://drive.google.com/file/d/1T0_-VS0VS3VTpXbCVH9W5cAfcNyT9yh3/view?usp=drivesdk https://drive.google.com/file/d/1I-f05k7LOC5aPuxY4__ipG5BZCfR3Mxb/view?usp=drivesdk https://drive.google.com/file/d/1RdVYUCf-j1-raCKxjPXzNjn76ziDgdk4/view?usp=drivesdk https://drive.google.com/file/d/1ZfDzxZsVilkQpYl8BfLK0kQl4mX5chfw/view?usp=drivesdk https://drive.google.com/file/d/1Eo4LHf3YOOlFkuPbAyo1mL_FjA3WI7em/view?usp=drivesdk Sent from my iPhone using Tapatalk

Here are more photos. Hopefully better ones. https://drive.google.com/file/d/1jBsm1caglHrPni9vKCBlRb4_iEBOaMAn/view?usp=drivesdk https://drive.google.com/file/d/1GDr3nLnAFFavIJZgnJfuw-iFz8rUizHv/view?usp=drivesdk Sent from my iPhone using Tapatalk

The bottom edge of the helmet isn't quite even, but how does this placement look? https://drive.google.com/drive/u/0/folders/1-3cuywOjv3AMfXDdb0t8aC_OB_uuuGrq https://drive.google.com/drive/u/0/folders/1-3cuywOjv3AMfXDdb0t8aC_OB_uuuGrq

Got the proper 3M bolts for the helmet. https://drive.google.com/file/d/1cViJtEdyc8ZlbbaUzdhAb6PgS1Fe00T0/view?usp=drivesdk https://drive.google.com/file/d/1qzi2eqXNkRKsTBGCSmDfOeRfPAbXUXlU/view?usp=drivesdk https://drive.google.com/file/d/1BvUMJsb3cviBBnza0J1_Q0noRC8zBvCj/view?usp=drivesdk Sent from my iPhone using Tapatalk

So, the CRL for Lancer says "drop boxes hang about an inch from the best". So, is that measuring from the bottom of the belt to the top of the box? Is that an inch of the fabric hangs? An inch seems really close to the belt and seem to cramp up the fabric and buckle. Can I please have some clarification on this? Here's what I have so far https://drive.google.com/drive/u/0/folders/1-3cuywOjv3AMfXDdb0t8aC_OB_uuuGrq Second question, did I do the parachute clips correctly to make them non-functional? (back view) https://drive.google.com/drive/u/0/folders/1-3cuywOjv3AMfXDdb0t8aC_OB_uuuGrq

Used BikerScout007’s technique for attaching the shoulder bells with zip ties. https://drive.google.com/file/d/1JQSKLxb7SWTB3wYxiUNFGxCJveBN_v1b/view?usp=drivesdk Sent from my iPhone using Tapatalk

Painted the inside of the helmet. Started behind the ears and went around the bottom half. https://drive.google.com/file/d/1Sd7gPcS5wK000yUoSA2DKt9bCWCt5mNv/view?usp=drivesdk https://drive.google.com/file/d/1RaQabF9FUfItvEUUlD8BQB3YkYswOR2S/view?usp=drivesdk https://drive.google.com/file/d/1DJB6OGEgAmlHfyejMsrE07y_UuEf5hMs/view?usp=drivesdk Sent from my iPhone using Tapatalk

Thanks for the clarification. Having gotten some miss information in another detachment when I was building my Mara Jade that caused me to have to remake a major component of that costume, I really appreciate you especially chiming in on all of my question threads. Sent from my iPhone using Tapatalk

Yes, I did after some confusion and misinformation. Thank you. I want to be sure I have everything correct and I am getting the correct information because I had an incident with flag ship detachment where a few people were giving me the wrong information and it caused me to have to redo a major component of my I want to be sure I have everything correct and I am getting the correct information because I had an incident with flag ship detachment where a few people were giving me the wrong information and it caused me to have to redo a major component of myMara Jade costume. That’s why I have so many threads and questions. LOL Sent from my iPhone using Tapatalk

Sooo. Edge or no edge? Sent from my iPhone using Tapatalk

Cool. TK Hubby knows what he is doing. Lol Sent from my iPhone using Tapatalk

I’m trying to make everything to Lancer level. So they stay then? Sent from my iPhone using Tapatalk

Do I need to ditch the return edges on the chest and back? https://drive.google.com/file/d/1U3nxbd4Vt98hLvKQUVYdczbgj4BdvYpY/view?usp=drivesdk

Test fitting chest and back. Does the return edge need to go? https://drive.google.com/file/d/1U3nxbd4Vt98hLvKQUVYdczbgj4BdvYpY/view?usp=drivesdk Sent from my iPhone using Tapatalk

Ok. That makes sense. I will give that a shot. Sent from my iPhone using Tapatalk

I'm a bit confused by the wording in the Level 2 section of the CRL for the shoulder bridge covers. Covers are between .5 inch and 1 inch wide. Does that mean that the gap between the front and back at the shoulders can only be an inch wide? Or does that mean, no matter how far the distance needed for a proper fit, the covers are up to an inch wide (so they would be, say 3 inches long but 1 inch wide) Thanks.