Hoda Posted September 21, 2020 Share Posted September 21, 2020 Hi team, TB-77520 here, requesting Lancer Deployment! Appreciate you taking the time to review. I know it's a bit picture-heavy, but I have placed the images in order of the CRL so the review should be hopefully easier. Eric Trooper Info: Name: Eric Ho TKID: 77520 Garrison: Star Garrison Parts Breakdown: Armor: Studio Creations Helmet: Altmann (Bolts from Imperial Surplus) (Swapped out the SC helmet from the build thread) Flightsuit: Chrisx909x Flak vest: KriptonTop (Swapped out the one in the build thread) Boots: Cheesewhoopy Cummerbund and Pouches: Cheesewhoopy Blaster: DVH Gloves: Wampa Wear Link to my build thread: Trooper Photos: Detailed Photos (some are repeats from the build thread): Helmet: Flight Suit: Shoulder Armor: Upper Arm Armor: Forearm Armor: Gloves: Vest: Chest Armor: Back Armor: Cummerbund, Codpiece and Pouches: Belt and Detonator: Knee Armor: Boots/Holster: Hold-out Blaster: Link to comment Share on other sites More sharing options...
Chopper Posted September 21, 2020 Share Posted September 21, 2020 Thank you for your application, Eric. The team will start their review and get back to you. One request -- could you possibly link to higher resolution photos for at least the overall shots? It's difficult for us to zoom in at the current resolution. Thank you! Link to comment Share on other sites More sharing options...
Hoda Posted September 21, 2020 Author Share Posted September 21, 2020 Yes sir! Will update the original post accordingly. Link to comment Share on other sites More sharing options...
Hoda Posted September 21, 2020 Author Share Posted September 21, 2020 Done! Link to comment Share on other sites More sharing options...
Chopper Posted September 27, 2020 Share Posted September 27, 2020 Hi Eric, Thank you very much for your application. You've done a great job and it really shows in your photos. The review team has gone over your application and we have the following items that we'd like you to address: Helmet We would like a photo of the top of helmet. The Altmann helmet uses a two part dome, which needs to be flush as per the CRL. We would like additional, close up photos of the helmet decals. The lines on the snout look more widely spaced than most of the ones we've seen. Did these decals come with the Altmann helmet? Balaclava When you re-take your photos, please take care to tuck in balaclava material so it doesn't stick out from underneath the bottom of the helmet. Flight Suit Would it be possible please retake your photos with better light? We can't see the riding patches and thigh straps, or how they sit in relation to the rest of your kit. Both are important considerations for the review. Your butt flap is about 2" too long vertically and will need to be trimmed Shoulder Armor Please move shoulder armor out about 1/4" to 1/2". Cummerbund Your bund is getting tucked into the belt, please position it so that it rests on top of the belt. Bring your chest pouches up maybe a half inch, so they're just over the belt as well, though the bund adjustment may take care of it. Belt and Detonator The caps on the detonator tube look like they're glued unevenly. The one on your left side seems high and the one on the right seems low. These will need to be re-glued. Please tighten your back thigh box straps, as they appear loose Holster The plate on your holster looks long, especially on the lower portion. You should trim about 1/2" to 1" off the top and bottom edges of the holster. Check against the CRL photo for some general guidance on the proportions. We suggest you use a 1/8" cobalt tip drill bit to drill out the rivets. You can close up the remaining lower holes with some patches made from white marine vinyl glued inside the boot. Again, you've done a really good job! Just a few items to address. Please let us know if you have any questions, or need any clarification. We're here to help! Link to comment Share on other sites More sharing options...
Hoda Posted September 27, 2020 Author Share Posted September 27, 2020 Chopper, thank you so much for looking over the submission! Most of the feedback seems like easy fixes. For the larger pieces ... a few clarifications before I make the adjustments - 1 hour ago, Chopper said: Helmet We would like a photo of the top of helmet. The Altmann helmet uses a two part dome, which needs to be flush as per the CRL. We would like additional, close up photos of the helmet decals. The lines on the snout look more widely spaced than most of the ones we've seen. Did these decals come with the Altmann helmet? This is the finished Altmann helmet so it came as is (maybe it was the angle that made it look strange). It's indeed a two part dome. I do still have the SC helmet I filled in the seam on - will this work for Lancer? Quote Flight Suit Would it be possible please retake your photos with better light? We can't see the riding patches and thigh straps, or how they sit in relation to the rest of your kit. Both are important considerations for the review. Your butt flap is about 2" too long vertically and will need to be trimmed I've folded it back a bit before I trim - will this work? Quote HolsterThe plate on your holster looks long, especially on the lower portion. You should trim about 1/2" to 1" off the top and bottom edges of the holster. Check against the CRL photo for some general guidance on the proportions. Trimming at the black line - this works? Link to comment Share on other sites More sharing options...
Chopper Posted September 29, 2020 Share Posted September 29, 2020 Hi Eric, Thank you very much for your questions. 1) You can stick with the Altmann helmet for your application. No further photos or modifications needed for that particular item. 2) For shortening your butt flap, it's really hard to tell from a photo of the unworn coveralls. If possible, you should really give us a look with you wearing it while folded. You don't have to wear your armor, but the belt would help. Up to you, but I'd hate to have you trim it too short, just based off of an unworn photo. If it helps, I've marked approximately where it should be trimmed to on the side photo from your application. 3) Your holster trim marks look like a great improvement! Great work, Eric! Link to comment Share on other sites More sharing options...
Hoda Posted September 29, 2020 Author Share Posted September 29, 2020 Oooh, I see what you mean with the flap now. Will get a chance to take a new photo before we trim. Appreciate the feedback on the helmet and the holster. I will get started on them!Thank you! Link to comment Share on other sites More sharing options...
Hoda Posted September 29, 2020 Author Share Posted September 29, 2020 Ah and now I know what you mean by cannot see clearly the flap in the back. The poor lighting has them all blurring together! Will use flash when I take the next round. Link to comment Share on other sites More sharing options...
Hoda Posted September 29, 2020 Author Share Posted September 29, 2020 Alright, some updates! Holster Drilled out the old rivets, trimmed down the holster, reattached the holster to the boots. I've patched the drilled out holes from behind, but still somewhat obvious ... I need to think of a different way to make the holes less obvious. Weathering? I don't have black spray paint readily available ... I can just ... throw a bunch of fuller's earth on the boots? Belt and Detonator Re-glued the endcaps to even them out. Flight Suit Instead of chopping right away, I asked my very very very nice wife to help me take some quick photos of the flap pinned back. What do y'all think? Link to comment Share on other sites More sharing options...
Chopper Posted September 30, 2020 Share Posted September 30, 2020 Thank you, Eric. The team will get back to you shortly. 1 Link to comment Share on other sites More sharing options...
Hoda Posted October 1, 2020 Author Share Posted October 1, 2020 @Chopper not sure why your post isn't showing up here, but I got a notification in my emails and know what I need to do next. I will trim the flap to the green line before suiting up again tmrw. I will also make sure the belt and the bund doesn't overlap (I know what you mean, finally, now that I'm seeing the photo from the back again).The repairing of the boots - that's exactly what I did tonight as well, hopefully it will show up nicely tmrw.Thank you (and the team) for the feedback! More to come! Link to comment Share on other sites More sharing options...
Chopper Posted October 1, 2020 Share Posted October 1, 2020 Hey Eric, I'm very sorry about the technical difficulties and apologies for any confusion. I wanted to re-post what I had drafted earlier -- You're doing a great job so far! The re-glued end caps on your thermal detonator look great. Excellent work! For the rivet holes in the boots, we think you could trim around the fringes of the hole with a small, sharp pair of scissors to clean it up, then touch it up with some white acrylic paint or white shoe polish. I've attached a photo of the butt flap and marked in green at about where you should trim it. The green mark looks pretty close to the white chalk mark you had on the left side. I hope that's enough guidance for you to trim your flap accordingly! Reminder -- try not to tuck your bund under your belt in front and back. Ideally it should sit on top of both. And one final item -- now that we're able to more clearly see the black on black details of your coveralls, the team thinks that your thigh straps are slightly too loose. Bring them in approximately 1/2" to 3/4". They shouldn't be so tight that they're cutting off circulation, nor should they fit loosely on your legs. You can get a sense of the fit in the attached photo from the CRL model. Before opening the seam, you can pin some of the strap excess to find the right fit. You're doing a great job, Eric! Almost there! Please let us know if you have any questions, or need additional clarifications! Link to comment Share on other sites More sharing options...
Hoda Posted October 1, 2020 Author Share Posted October 1, 2020 Alright, updated photos! Updates I have made, based on feedback from the team: Balaclava: Tucked in. Butt Flap: Trimmed down to the recommended line. Thigh Strap: Shortened so it's not loose. Cummerbund: Sit on top of belt, not tucked under. Detonator: Realigned the end caps so it's balanced. Holster: Trimmed down the holster to look similar to the CRL holster. Boots: Drilled out rivets, patched with marine material, painted with white paint. 2 Link to comment Share on other sites More sharing options...
Chopper Posted October 2, 2020 Share Posted October 2, 2020 Thank you so much, Eric. The team will review and get back to you soon! Link to comment Share on other sites More sharing options...
Hoda Posted October 2, 2020 Author Share Posted October 2, 2020 Thank you so much, Eric. The team will review and get back to you soon!Thanks so much!! *Fingers crossed* Link to comment Share on other sites More sharing options...
Chopper Posted October 5, 2020 Share Posted October 5, 2020 Hi Eric, Thank you for your continued patience. In our final review we wanted to bring up a few remaining items: Question: Can you please clarify if your drop box straps are elastic, or cotton webbing? Dressing Issue: Just a FYI, but we noticed that you forgot to loop your side straps into the loop for the chest armor (see photo). Dressing Issue: As a suggestion for the future, you might want to add some stirrups to your coveralls, which will help to take some of the slack out of your legs. The primary remaining item for your application is the question about the drop box straps. If you could let us know, it would be greatly appreciated. Thank you again for your patience! Link to comment Share on other sites More sharing options...
Hoda Posted October 5, 2020 Author Share Posted October 5, 2020 HI @Chopper Thank you again for the response! Re: the dressing issues, thanks for the reminder. I had my wife help me with suiting up this time around and I must've missed that ... my bad. I will also add some stirrups. The dropbox strap is white cotton webbing per the CRL. Here's a close-up look. Link to comment Share on other sites More sharing options...
BikerScout007 Posted October 7, 2020 Share Posted October 7, 2020 Lancer status approved! Congrats. 4 Link to comment Share on other sites More sharing options...
Recommended Posts