Smokeshow

Just thought i would bring you up to speed on this build. I feel pretty good that the helmet is finished!

Wayner, You can double check with Mr Poopie, but i'm pretty sure that we could use red 1/4" air line tubing for the wires. Light and durable, moldable with heat gun and other wires could be run inside of it if needed. https://www.amazon.com/SNS-Pneumatic-Meters-Tubing-Transfer/dp/B07PGF3VV7/ref=pd_sbs_469_3/131-6559522-6831907?_encoding=UTF8&pd_rd_i=B07PGF3VV7&pd_rd_r=e67c2586-28c0-4c93-a11e-d8c0112d989a&pd_rd_w=CnR8l&pd_rd_wg=MLrxE&pf_rd_p=bdd201df-734f-454e-883c-73b0d8ccd4c3&pf_rd_r=WR4ZTC37HW9TP2P8MFQ5&psc=1&refRID=WR4ZTC37HW9TP2P8MFQ5

I might have a few ideas on the telescoping part, send me a message on messenger, facebook or email

How much stroke does the retractable section of the staff have? Best guess

Mine is right at 14" wide, what diameter did you make it? Mine is roughly 6 inches in diameter

Really nice job on the battery, but I thought it was larger than that, you have a reference to place next to it?

Has anyone noticed that the staff is retractable?

Sorry, for some reason I cant upload the video and pictures.

https://www.facebook.com/william.ellender.1/videos/520688685198291/

Yes, that was my thought exactly. I didn't put one in there yet because I was not sure what size it would be. I can add the recess for almost any size magnet.

Based on the new photos of the scout, I have made alterations to the end of the power pack that holds the staff. https://photos.app.goo.gl/MctWA2DH5XvLCiLB9

I resized the original To 150 mm and made it a little taller plus made the other end. Printing the prototypes now. Any input is appreciated!

Here it is, 110 mm wide. Still seems a little small to me.

I am currently printing the exhaust/intake end cap for the power pack right now, will post pictures of the first prototype when its done for evaluation?

Yoshix, a 3D printed helmet can be scaled to fit you perfectly! In fact, I make them to be sized to each person wearing them.

thedaringdragoon I'm not sure how far you have gotten with this build, but I can offer my services if you are interested? I have a small props shop that I make the helmets for the Shore, Tanker and AT-ACT driver. Here is a Shore that I am currently working on for a client, and I have the ability to make plenty more! Send me a message if you are interested or just want to ask questions. I always will answer to the best of my ability and won't just try to sell you something! I have added a link to my Facebook page. https://www.facebook.com/parttimeprops/?modal=admin_todo_tour

Paint done!

Almost there!

I'm sorry, I don't have any pictures of the bucket in each individual piece, but I can tell you that he sells the file(s) in one piece. I had to decide how to split it. It was easy to do if you have some experience with 3D files, but if anyone out there that is considering buying this file, he sold me a complete file set with every 3D printed part for the entire suit! Now, I would normally be able to deal with you directly for and of the licensed pieces, such as the shore or the tanker since I own licensed copies of them that I can sell quantities of, but the Patrol I bought for myself. I can not say if he still has that offer in play, but it was worth it, and if you buy it, and need help, just let me know. I can be found on here or on Facebook. Leaving a message here sends a notice to my email, so I can get back to you fairly quick. As for the bucket, I split mine into 5 pieces, not including the blast shield the ring under it or the greeblies. Basically the dome was one piece, then the rest was quartered up.

A little closer, it's getting there!

Getting lots done this week, here it is with the white. Just needs to cure before color sanding. Again, sorry about the rotation.

Time for some updates, sorry for the orientation:

No, what you see is five pieces.