Kagamaru Posted March 28 Share Posted March 28 About to pull the trigger on the full costume. I built my TK from "scratch" meaning untrimmed vacuum parts etc. But for my scout I am more interested in getting going as quickly as possible. I see that Studio Creations has assembled armor for sale. Going to search the forums here for anyone trying to unload their kit possibly. Soft parts from KriptonTop. Boots from Imperial Boots or Crow Prop. Still working through the rest. Links for my convenience: Studio Creations (Do they have the concave bolts for Lancer?) Keep Trooping (Boots and Gloves) KriptonTop (Soft Parts) Pathfinder Forum Vendor Section Build Video 1 Quote Link to comment Share on other sites More sharing options...
Chopper Posted March 28 Share Posted March 28 SC does not provide concave bolts, only flat ones. Get the 3M style bolts here: https://www.amazon.com/dp/B002BUMS8Y/?coliid=ILTCA2MHBZT97&colid=1FW2Z38AXTS5Q&psc=1&ref_=list_c_wl_lv_ov_lig_dp_it 1 Quote Link to comment Share on other sites More sharing options...
Kagamaru Posted March 28 Author Share Posted March 28 1 hour ago, Chopper said: SC does not provide concave bolts, only flat ones. Get the 3M style bolts here: https://www.amazon.com/dp/B002BUMS8Y/?coliid=ILTCA2MHBZT97&colid=1FW2Z38AXTS5Q&psc=1&ref_=list_c_wl_lv_ov_lig_dp_it This is the large gray disk on the hinge of the helmet correct? Quote Link to comment Share on other sites More sharing options...
Chopper Posted March 28 Share Posted March 28 Yes 1 Quote Link to comment Share on other sites More sharing options...
Kagamaru Posted April 8 Author Share Posted April 8 So I spoke with SC and a few other folks and I’m not convinced their helmet is going to be the best option. It sounds like it’s iffy on whether or not it’s approvable because of a seam that bisects the top front to back. So does anyone have a sure fire vendor that sells ready to go armor and helmet that will be approved with minimal effort? I know I’ll have to fiddle with things like bolt replacements etc. and I’m fine with that, but otherwise I want to just get something wearable (almost approvable) out of the box. Any other suggestions? Quote Link to comment Share on other sites More sharing options...
Chopper Posted April 8 Share Posted April 8 Constructed properly, the studio creations helmet is approvable. It does run small, so it's not the best option for all scouts, but it is approvable. If you want pre-assembled "ready to go" armor with little prep, then you might want to look at RS prop masters. https://www.rspropmasters.com/store/biker-scout/biker-scout-biker-scout/scout-trooper-armour-pre-order-copy/ Note that nothing is approved out of the box and approval ultimately depends on how everything fits on you. 1 Quote Link to comment Share on other sites More sharing options...
DaHoff Posted April 8 Share Posted April 8 I can recommend RS. I do have a ready-to-wear-kit from RS myself and only had to change really little things (mostly softparts, which are from Imperial Boots) to get the approval. Its not the cheapest solution though 🙃 1 Quote Link to comment Share on other sites More sharing options...
TreeHuggerMatt Posted April 10 Share Posted April 10 RS are probably the best bet. I know they worked with IB to get the soft part issues sorted. my kit was from chef but he’s not taking on commissions now as he’s trying to catch up with a backlog Shows how good his stuff is I guess 1 Quote Link to comment Share on other sites More sharing options...
Kagamaru Posted April 13 Author Share Posted April 13 Is there a trusted vendor stateside? I’m ordering soft parts as I type. Quote Link to comment Share on other sites More sharing options...
Chopper Posted April 13 Share Posted April 13 As best I know, there are no US-based vendors who offer everything fully built and ready to wear. Best you can do is get a fully trimmed kit and then do the rest of the strapping and build work. Studio Creations and Mon Cal/Far Away Creations offer fully trimmed scout kits. 2 1 Quote Link to comment Share on other sites More sharing options...
Kagamaru Posted April 14 Author Share Posted April 14 Ok soft parts, gloves and boots ordered! I’m going for ROTJ scout. I’m going to do the weathered look. Do I need white or off white pouches? Quote Link to comment Share on other sites More sharing options...
Kagamaru Posted April 14 Author Share Posted April 14 Also I just saw that WTF has his new kits available. Is it up to spec now? After looking at everything I might just go ahead and build it. I’m comfortable working with Walt but want to be sure his new kits are going to be approved. Quote Link to comment Share on other sites More sharing options...
Chopper Posted April 14 Share Posted April 14 26 minutes ago, Kagamaru said: Ok soft parts, gloves and boots ordered! I’m going for ROTJ scout. I’m going to do the weathered look. Do I need white or off white pouches? Pouch color is not dependent on whether you've weathered the armor or not. Either is fine for both weathered or clean as long as you follow the CRL stipulations regarding pouch and strap coloration. "If using off-white cummerbund pouches and side straps, the drop box straps are also off-white." 1 1 Quote Link to comment Share on other sites More sharing options...
Chopper Posted April 14 Share Posted April 14 40 minutes ago, Kagamaru said: Also I just saw that WTF has his new kits available. Is it up to spec now? After looking at everything I might just go ahead and build it. I’m comfortable working with Walt but want to be sure his new kits are going to be approved. Walt has worked closely with us on his armor kit revisions, but we have yet to see it assembled and worn by anyone. It should be fine for basic clearance, as even his prior kit was okay for basic and this is an improvement on that kit. 1 Quote Link to comment Share on other sites More sharing options...
Deadpool Posted April 14 Share Posted April 14 So I am building a V1 kit from WTF for the wife with a helmet from another maker. I have parts but not a complete kit for myself from another 501st member that gave up on his build and sold it to me. Because mine isn't complete I'm going to go ahead and get the V2 kit and go step by step with the build and work towards Lancer. 1 Quote Link to comment Share on other sites More sharing options...
Kagamaru Posted April 14 Author Share Posted April 14 I’m going to go ahead and get his V2. I want to just get it ready to go but it doesn’t look as involved as the tk so I’m just going for it. I am getting the helmet premade by someone in his shop. Thanks everyone for the feedback. I guess I’ll have a lot more posts as I work through the build. 1 Quote Link to comment Share on other sites More sharing options...
Kagamaru Posted April 16 Author Share Posted April 16 The boots have slots cut into the heels and toes as seen in the film. What does this mean? Quote Link to comment Share on other sites More sharing options...
Chopper Posted April 16 Share Posted April 16 The Sierra Sneaker was used as the underboot for the biker scout boots in the film. They are no longer available and haven't been since the 80s. For level two you would have to make cuts into the underboot in order to approximate the pattern of the Sierra Sneaker. It doesn't have to exactly match, but it should approximate the pattern. Your other option is to get a set of Gio/Crowprops underboots or biker scout boots, which use the Sierra Sneaker sole pattern. 1 Quote Link to comment Share on other sites More sharing options...
Kagamaru Posted April 16 Author Share Posted April 16 Ok cool! I ordered from crowprops. Everything I’m seeing I made the right choice. Thank you! Quote Link to comment Share on other sites More sharing options...
Kagamaru Posted May 6 Author Share Posted May 6 I've been observing our local scouts suit up routine during our troops. I've been able to manage getting my TK to a point where I can get it on and off without assistance. But from what I observe that looks pretty difficult with the scout. Is that just their particular builds or is there flexibility in the construction of the suit to allow you to get it on and off without assistance? Points of trouble that I see are getting the bib/short over-jacket fastened as it has velcro running all the way down the spine, and getting the chest/shoulder/upper arm plates pulled down over the head. Do you allow for snaps so those bits can be put on then snapped into place? Quote Link to comment Share on other sites More sharing options...
Chopper Posted May 6 Share Posted May 6 Nothing that is hidden is evaluated for clearance purposes -- we only care about what's outwardly visible. That said, it is very difficult to get suited up by yourself in the Scout. The flak vest and bund are the two items that are pretty hard to do without assistance. It takes about 10 seconds for another trooper to help close the back of the flak vest, bund, and optionally, belt and detonator, so that's what I've always done. 1 1 Quote Link to comment Share on other sites More sharing options...
LTCAlex Posted May 13 Share Posted May 13 Just from experience, and I'm a relatively newly approved Scout so keep that in mind, but I've only ever been able to de-kit without help, not put it on. I've always needed someone around to help (thank goodness for handlers and fellow troopers!) Which, coming from being a TIE Pilot, which I can entirely do myself, was a bit of a shock lol. 1 Quote Link to comment Share on other sites More sharing options...
Kagamaru Posted May 13 Author Share Posted May 13 7 hours ago, LTCAlex said: Just from experience, and I'm a relatively newly approved Scout so keep that in mind, but I've only ever been able to de-kit without help, not put it on. I've always needed someone around to help (thank goodness for handlers and fellow troopers!) Which, coming from being a TIE Pilot, which I can entirely do myself, was a bit of a shock lol. I can’t wait until everything comes in! 2 Quote Link to comment Share on other sites More sharing options...
Kagamaru Posted May 29 Author Share Posted May 29 Can someone tell me the difference between neck styles on the flight suit? I have the option of Racer or Flight. Also, if I'm going for ROTJ scout, weathered, which color pouches should I get? White or off-white? I would prefer it all to match if it's just a preference thing. Thanks! Quote Link to comment Share on other sites More sharing options...
Chopper Posted May 29 Share Posted May 29 Get white pouches, then you can tea dye the pouches and the straps if you want to go with that option. What vendor are you looking at for flight suit? I assume racer means a "mandarin" or "covered" collar and flight means an open collar? More info would be helpful. For the flight suit you have the option of an open collar or a mandarin collar. This video summarizes the options well: 1 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.