Worst Posted March 18 Author Share Posted March 18 Thanks Don! I'll see if I can track one of those down. In the mean time, I started finishing the chest armor. I tried to be a little conservative on the edges knowing that I can take them in further once it's assembled. It seems like this process is easier once everything is in place and I can see what looks off. I definitely don't want to take any more off the front straps, those seemed to short by design and I took them as far I felt comfortable (enough to get rid of where the plastic kicked back up.) So far, fit seems pretty good. 1 Quote Link to comment Share on other sites More sharing options...
Aradun Posted March 18 Share Posted March 18 Looks good Bill. You’ll be able to adjust the back once you’ve got that finished and you’re able to suit up to see how it all comes together. You’re making fantastic progress! 1 Quote Link to comment Share on other sites More sharing options...
Worst Posted March 19 Author Share Posted March 19 No feedback needed, just proof that despite finding out that 15mm furniture screw hole covers are the perfect size white circles, these are in fact painted. This is acrylic model paint from Testors. I took a toothpick along the red line to clean it up a bit. On the white dot I used a liberal amount of paint and let surface tension do the rest. 3 Quote Link to comment Share on other sites More sharing options...
Worst Posted March 20 Author Share Posted March 20 Finished up the bells and a few of the arm pieces, so I figured I'd do another suit up to see how everything was fitting before continuing. I've finished up the other arm armor and should be moving on to the belt, tank and holster soon. I think I'm going to do a small detour to finish up the rest of my soft goods. I'm hoping I can knock them out by EOW. That should put me in a position where I can hopefully wrap up before I leave on a trip in April. 4 Quote Link to comment Share on other sites More sharing options...
Retrofire Posted March 21 Share Posted March 21 It's looking pretty good Bill. It looks that your vest sleeves are quite long so that might be an issue when it comes to approval. Typically the sleeves are 1.5-2 inches from the shoulder bell. Take a look at the CRL model. Keep up the great work it's coming together! Quote Link to comment Share on other sites More sharing options...
Worst Posted March 21 Author Share Posted March 21 It's looking pretty good Bill. It looks that your vest sleeves are quite long so that might be an issue when it comes to approval. Typically the sleeves are 1.5-2 inches from the shoulder bell. Take a look at the CRL model. Keep up the great work it's coming together!I should have mentioned. Those are unfinished. I was hoping to measure the bells once they were in a good spot. Thank you though for the positive feedback!! I'm super excited 1 Quote Link to comment Share on other sites More sharing options...
Worst Posted March 25 Author Share Posted March 25 Got to step away for a bit today and knock out a couple more things. Last week I was able to add the Cod (though I still need to finish it as it's currently just tucked under the bund) The base is EVA craft foam from Michael's and the top is about 6 layers of medium weight batting. Today I worked on the tank. I think I'm really close and am just going to go for it, as I feel like I need the elastic to start working out how it will sit on the back armor. I also shaped the belt and attached the webbing straps. Should mostly be finishes at this point. My Friday is pretty wide open so I'm hoping I can knock everything except maybe the holster out. 2 Quote Link to comment Share on other sites More sharing options...
Worst Posted March 25 Author Share Posted March 25 Pro Tip for anyone trying to put holes in their polyester strapping/elastic: If you don't care about the tip, soldering irons make great holes and seal the edges. 4 Quote Link to comment Share on other sites More sharing options...
Chopper Posted March 25 Share Posted March 25 1 hour ago, Worst said: Pro Tip for anyone trying to put holes in their polyester strapping/elastic: If you don't care about the tip, soldering irons make great holes and seal the edges. This is 100% true and a great tip. 1 Quote Link to comment Share on other sites More sharing options...
Worst Posted March 28 Author Share Posted March 28 More progress, I'm getting comfortable, which is probably dangerous but I've gotten into a good place with the tank and belt. There is definitely some refinement especially in how the tank sits against the armor but again, I'm feeling pretty good about my first pass: 2 Quote Link to comment Share on other sites More sharing options...
Chopper Posted March 28 Share Posted March 28 Remember, the tank does not need to be absolutely, seamlessly, and perfectly flush with the back armor. There were a lot of gaps and flopping around on the ROTJ tanks. 4 Quote Link to comment Share on other sites More sharing options...
Worst Posted March 28 Author Share Posted March 28 3 hours ago, Chopper said: Remember, the tank does not need to be absolutely, seamlessly, and perfectly flush with the back armor. There were a lot of gaps and flopping around on the ROTJ tanks. Thanks @Chopper, Took it a little bit further but I'm happy with where it is at. It should be good enough for approval. I plan to add some velcro on the inside of the armor to help keep it from sliding horizontally and maintain pressure on the elastic (though I suspect my back will do that naturally). That should help maintain position and general flopping. See the one I did on the inside bottom of the tank: 2 Quote Link to comment Share on other sites More sharing options...
Worst Posted May 30 Author Share Posted May 30 Phew, what rough a couple of months. I was pushing really hard to hit that May 3rd date Hospital troop and burned myself out a little bit. Took a hiatus and life threw a couple of curve balls. Thanks @Aradun for the gentle nudge to get back at it. Took some time today to take stock of what was left to do and get moving on a few things. I'm going to try to wrap up the TD today and I finally got around to putting the pin-striping on the tank. I'm targeting JFO scout at some point so I went for the 4 rank bars + trap. 1 Quote Link to comment Share on other sites More sharing options...
Worst Posted June 1 Author Share Posted June 1 Big day for fitment. I finally have most of the pieces to be able to do a full suit up. I also am almost done with the TD (just need to put the clips on) Here are some "almost there" shots to see what I need to do yet. This is what I am aware of and will be correcting for final: Shoulder bells still don't have the 1/4" elastic strap so they flop forward in the photos. Straps are still missing the elastic, easy fix Velcro to keep the bund/pouches from sliding down Velcro on the knee armor to keep it from sliding down as well Pull the cod up a bit Remove clip in favor of velcro on the elastic of the cod I'm also likely going to affix the hard hat liner with industrial sticky velcro since the gaffers tape doesn't hold more than a troop's worth of time Any additional feedback is welcome 1 Quote Link to comment Share on other sites More sharing options...
Chopper Posted June 1 Share Posted June 1 I think you've covered the bulk of the dressing issues. Keep on driving on and you'll get cleared soon, I'm sure. 1 Quote Link to comment Share on other sites More sharing options...
Worst Posted June 1 Author Share Posted June 1 Thermal detonator complete. Used rivets and the "sink downpipe" method of attaching the caps. I tried super glue but ultimately restored to hot glue. Seems to have held pretty well: Quote Link to comment Share on other sites More sharing options...
Aradun Posted June 1 Share Posted June 1 Looks sweet Brother! Nicely done! Quote Link to comment Share on other sites More sharing options...
Worst Posted June 7 Author Share Posted June 7 Ok, everything is "finished" (I hope). I have preliminary suit up pictures and plan to do a full shoot for submission next week with better lighting. My wife didn't notice that the tank was askew/off-center but you get the general idea. ETA: I have a strap in the boot with the holster, but I think I might add some additional velcro there to keep it from sliding down. 1 Quote Link to comment Share on other sites More sharing options...
OnkelPaschulke Posted June 9 Share Posted June 9 Looking good, just some dressing issues i think. Biceps and forearm armor should be rotatet more to the front. The biceps armor could sit a little more higher and your shoudlers are not rotatet evenly. And maybe the dropboxes could be lowered an inch or so. 1 Quote Link to comment Share on other sites More sharing options...
Retrofire Posted June 9 Share Posted June 9 14 hours ago, OnkelPaschulke said: Looking good, just some dressing issues i think. Biceps and forearm armor should be rotatet more to the front. The biceps armor could sit a little more higher and your shoudlers are not rotatet evenly. And maybe the dropboxes could be lowered an inch or so. Agree with Arne on the biceps and forearms. Those should be rotated forward. Forearms should be over the top of your hand (glove gauntlet) and the biceps should be aligned with your shoulders. For basic the drop box distance from the belt isn't an issue but for lvl2 they should be around 1 inch (2.54cm) from the belt. 2 Quote Link to comment Share on other sites More sharing options...
Worst Posted June 23 Author Share Posted June 23 TB-42987 reporting for duty. Got my clearance yesterday. Thank you all for your support! Quote Link to comment Share on other sites More sharing options...
Chopper Posted June 23 Share Posted June 23 Congrats on your approval 1 Quote Link to comment Share on other sites More sharing options...
Retrofire Posted June 23 Share Posted June 23 Congrats on your approval Pathfinder! Excellent work! Quote Link to comment Share on other sites More sharing options...
Aradun Posted June 24 Share Posted June 24 Dude your approval photo is killer! That’ll make for a sweet trading card. Congrats brother and well done! Quote Link to comment Share on other sites More sharing options...
OnkelPaschulke Posted June 24 Share Posted June 24 Congratulations! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.