Rad Posted June 30, 2021 Share Posted June 30, 2021 Hello Command Staff. Details of my application for vanguard are as follows: Armour- 3d printed Alain Rivard files. Helmet - 3d printed Nico Henderson files, Paul’s lens. Hip armour- made and finished by Paul. Buckles and strap set from Paul. Pouch set from Paul. Belt- Rob Kittell Boots- Orca Bay Brecon Gloves- Imperial Boots Shirt and neck seal- Imperial boots V2 Military surplus M56 mag pouch D bay 94 (german garrison tk) on Etsy E11b 3d printed kit. Sean fields E22 with mods and correct m plate files (thank you Mickey) Breeches- Steven Walker Paint list - Halfords Ford Rio Brown base coat Halfords matt black - helmet, bell stripes, weapons etc. Halfords Toyota red 3E5 right bicep Montana gold Sahara Beige all armour. Montana gold yellow taxi cab - bicep squares Montana gold pebble white Pantone 1445 Spicy Orange custom mix can for helmet symbol Dirty down grey and dark brown Daler Rowney raw umber and black acrylics for weathering and aeging sprays Plastazote for chest and back Over the past year i have been making the necessary mods and acquiring the parts needed for L2. My original 850 arms and legs have been replaced with Alain Rivards files the same as the rest of my armour. Alains helmet replaced with Nico Hendersons 3d printed files. All replacements have been printed in carbon fibre pla and finished by me. Same process for all of it. Hand sanded raw prints , no filler. Then base coat brown, liquid mask fluid for chips, Sahara coats. Belt sanding and hand sanding, filing and 4 passes of dirt and aeging sprays. The shins have about 25 magnets to connect the greaves to the clams along with the straps they are solid and can sprint in them with no issues...except I’m sprinting. Thank you for your time and efforts in your consideration. Sent from my iPad using Tapatalk Link to comment Share on other sites More sharing options...
Rad Posted June 30, 2021 Author Share Posted June 30, 2021 Sent from my iPad using Tapatalk Link to comment Share on other sites More sharing options...
Rad Posted June 30, 2021 Author Share Posted June 30, 2021 Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Rad Posted June 30, 2021 Author Share Posted June 30, 2021 Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Rad Posted June 30, 2021 Author Share Posted June 30, 2021 Neck seal has been modded with better fitting imperial seamstress ribbed collar sewn to IB bib. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Rad Posted June 30, 2021 Author Share Posted June 30, 2021 Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Rad Posted June 30, 2021 Author Share Posted June 30, 2021 Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Rad Posted June 30, 2021 Author Share Posted June 30, 2021 Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Rad Posted June 30, 2021 Author Share Posted June 30, 2021 Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Rad Posted June 30, 2021 Author Share Posted June 30, 2021 Doopy doos resin scope . All screws m4 hex and countersunk on power cylinders which are 3D props resin. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Rad Posted June 30, 2021 Author Share Posted June 30, 2021 Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Rad Posted June 30, 2021 Author Share Posted June 30, 2021 Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
KOtrooper Posted June 30, 2021 Share Posted June 30, 2021 Fantastic. The team will take a look and get back to you!Sent from my Pixel 3a using Tapatalk 1 Link to comment Share on other sites More sharing options...
Minimo Posted July 2, 2021 Share Posted July 2, 2021 Rad, really nice work, your hard work and dedication is visible in the armor. After review, here’s what we got:More pictures:-We would like to see close up photos of the back box details.Vanguard suggestions:-Your shoulder bell should not slide underneath the foam.-The ribbed area of the shirt should tuck completely into the bracer.-The bottom of your visor could use a bit more weathering to match the rest of your armor.-Your oiler pouch and shotty shells appear to be touching your belt (maybe lowering them or playing around with how you fit them could help)-We recommend lowering your bicep armor a bit in order to cover the gap from your bicep to your bracer a bit better.-Your back foam could use some adjustment, so that it does not “end” prematurely.-As awesome as we think your E-22 weathering looks, we have not seen any screen used versions that show signs of heat burn and recommend this be changed.You are close bro, looking forward to what you come up with!Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Rad Posted July 8, 2021 Author Share Posted July 8, 2021 Hi Team, Thank you for your points. I have redone my plastazote from my original half a square kilometre roll on the back armour and now goes down past the edge line. Weathered the underneath of my helmet visor. Repainted the blueing with Matt black, silver and raw umber and black acrylic dirt , same as the rest of the E22 My faulds were suffering with caseitis Locked away for a year with kit on them has bent the back section and it’s floppy so I have reinforced with some of same tape Paul used on them and extended the Velcro tab that fixes onto spine plate and it’s got them sitting way better . I will make new elastic and snap shoulder bridges as they are not right for my new bells and see how they hang when done before adjusting the bicep drop, but I think it need 15-20mm more drop anyway. Not quite touching the crease in my arm. I have lined the bells at the top with 6mm foam to lift them slightly so that when the new bridge is made I will snap onto it higher and the 2 measures will hopefully make the bells sit better and not under the plastazote. Waiting for snaps to arrive in post . Hopefully get some more pics up soon. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Minimo Posted July 8, 2021 Share Posted July 8, 2021 Looking good, thanks for the update!Sent from my iPhone using Tapatalk 1 Link to comment Share on other sites More sharing options...
Rad Posted July 8, 2021 Author Share Posted July 8, 2021 Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Rad Posted July 8, 2021 Author Share Posted July 8, 2021 Outside pics are picking up blue sky on the silver , promise it’s not as it has a black base then silver Inside pic definitely silver Sent from my iPhone using Tapatalk 1 Link to comment Share on other sites More sharing options...
Minimo Posted July 11, 2021 Share Posted July 11, 2021 Thank you!Sent from my iPhone using Tapatalk 1 Link to comment Share on other sites More sharing options...
Rad Posted July 18, 2021 Author Share Posted July 18, 2021 Hey team, we are experiencing a heat wave ! 85 degrees, hell of a shock .All on this morning, horrendous. Lasted 20 mins and boiling Redone shoulder elastics and dropped the biceps . I think the bells and arms are sitting nicely now and the foam helps grip the shirt , all keeps the arms in line and sitting where they should. Gaps good distance. I have looked at the faulds and where the shot shells and pouch are from screen grabs and mannequin shots. ( not well dressed ) I think they are in the correct place and think mine are comparable if not sitting slightly better. I think I have addressed all your points team and made the necessary changes. Many thanks guy’s for your continued consideration. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Minimo Posted July 18, 2021 Share Posted July 18, 2021 Thx bro, we will take a look and get back to you!Sent from my iPhone using Tapatalk 1 Link to comment Share on other sites More sharing options...
Minimo Posted July 20, 2021 Share Posted July 20, 2021 Allrighty @Rad! We appreciate your time and dedication, welcome to Vanguard brother! Congratulations! 2 Link to comment Share on other sites More sharing options...
Recommended Posts