hirerob Posted May 27, 2021 Share Posted May 27, 2021 Hello! TB-10726 requesting review of my ROTJ biker scout for level 2 approval. Name: Rob Johnson Garrison: Star Garrison Squad: North Texas Squad Armor maker: Studio Creations Helmet maker: Studio Creations Flight suit maker: Imperial Boots Vest/Cummerbund/Cod/Pouches maker: Imperial Boots Gloves maker: Imperial Boots Boots maker: Imperial Boots EC-17 blaster: Imperial Arms Scout type: : ROTJ Submission photos are below as well as here: https://www.dropbox.com/sh/7x8kulssmdjoxki/AADw_1azbP3-MCjZAl6oCx1Da?dl=0 Thank you for taking time to reviewing my submission. I look forward to your feedback. And, of course, let me know if you have any questions or need additional images. Full Body Helmet Chest/Back Cummerbund/Pouches Belt/Detonator Shoulder/Arms/Knees/Gloves Boots Vest/Cod Flightsuit Blaster Thanks again for reviewing my submission. 1 Link to comment Share on other sites More sharing options...
Chopper Posted May 27, 2021 Share Posted May 27, 2021 Hi Rob, thank you for your submission. We cannot currently see your photos, so if you could please post them within your application post via an image hosting provider, then we'll be happy to proceed with reviewing your Lancer request. 1 Link to comment Share on other sites More sharing options...
hirerob Posted May 27, 2021 Author Share Posted May 27, 2021 5 minutes ago, Chopper said: Hi Rob, thank you for your submission. We cannot currently see your photos, so if you could please post them within your application post via an image hosting provider, then we'll be happy to proceed with reviewing your Lancer request. Fixed, sorry about that. Link to comment Share on other sites More sharing options...
Chopper Posted May 27, 2021 Share Posted May 27, 2021 No problem, Rob, and thanks so much. The Armory team will review and get back to you shortly. 1 Link to comment Share on other sites More sharing options...
hirerob Posted June 7, 2021 Author Share Posted June 7, 2021 No problem, Rob, and thanks so much. The Armory team will review and get back to you shortly.I don’t mean to be impatient - don’t know how long reviews typically take and totally get this isn’t y’alls day job. Just checking in and thanks for taking the time to look in the first place. Just eager. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Chopper Posted June 7, 2021 Share Posted June 7, 2021 Hi Rob, the back and forth can sometimes take a minute because the review team is comprised of several people who all weigh in and give their views on the application. That said, we should be ready to post our feedback very soon, so we greatly appreciate your patience! Link to comment Share on other sites More sharing options...
hirerob Posted June 7, 2021 Author Share Posted June 7, 2021 Got it, thanks for the quick reply. Carry on. Link to comment Share on other sites More sharing options...
Chopper Posted June 10, 2021 Share Posted June 10, 2021 Hi Rob, thank you very much for your patience as the team reviewed your Level 2 application. Here's what we have -- Helmet The putty used to seal the two-piece dome is cracking off along the back and needs to be repaired. Flight Suit It's difficult for us to tell if the suede used on the IB flight suit is real suede or faux suede. Could you please supply some additional photos of the riding patches? The legs are baggy and will need to be better fitted by taking them in slightly. Upper Arm Armor Dressing Adjustment: Next time you suit up, please make sure to rotate the upper arm armor to the 9 and 3 oclock position to your left and right. Forearm Armor Dressing Adjustment: Next time you suit up, please make sure to rotate the upper arm armor to the 10 and 2 oclock position on your left and right forearms, respectively. Back Armor Can we please see a top down photo of the tank topper greeblie? Cummerbund and Codpiece The CRL for level 2 calls for "smooth white cotton fabric". The IB cod and bund look like they're made of a denim or canvas material. This is fine for the pouches, but the cummerbund and cod will need to be replaced with fabric that fits the Level 2 CRL requirement. Belt Dressing Adjustment: Note that your belt is dropping forward. You might want to use some velcro to keep it in place in the future. Detonator The detonator is silver colored. You'll need to paint the existing tubing neutral grey. Knee Armor Can you please provide the top elastic measurement? Boots The new Imperial Boots are great, however they still have a horizontal stitch at back seam, which has been an issue for Level 2 applications in the past. We recognize that the stitch is structural, but it can be filled with a bit of paint or caulk to make is less evident -- please reference what equuspolo did in his Lancer app, Holster The cuts in the holster are a bit too large -- they should be fairly thin as per the CRL and screen reference. You can put a piece of thin styrene behind the cuts, fill the large gaps with ABS paste, and re-cut with a thin dremel cutting wheel. Round off the hard edge cuts where the blaster fits in. See attached photo and screen ref below. Blaster The singlepoint scope of the blaster should not be hollow. It will need to be filled in. See screen ref photos. Also if we could please see a barrel front photo, that would be appreciated as well. I know it probably seems like a lot, but you can work through it with some effort and determination. Please let us know if you have any questions or need any clarification. Thank you again for your time and patience! Link to comment Share on other sites More sharing options...
hirerob Posted June 10, 2021 Author Share Posted June 10, 2021 OK, thank you, Corey. I appreciate the team's detailed feedback. Link to comment Share on other sites More sharing options...
Recommended Posts