jdouce45 Posted February 28, 2021 Author Share Posted February 28, 2021 Latest suit up... I split the crotch and removed 2 inches of width from each rear patch, while I was there I reshaped the lower part of the patch to look closer to what is seen in the reference CRL images. I replaced the thigh straps with new ones since they needed to grow quite a bit. I then took up 1.25 inches on the outer seam of the legs in the thigh region to remove some of the bulk that collected under the elastic. I ended up with a much better fit. I removed roughly 3.5 inches from the width of the butt flap, raised it up 2.5 inches and let out another inch which netted a 1.5 inch shortening overall. I came to these measurements by taking a picture of the butt flap as it was in the shop with a yard stick clamped to it, then superimposing that on top of the mark up image to give me an accurate way of converting the markup lines to real world measurements. I did get a new hand guard made for the blaster, scrapping the plastic one that was misshapen for an 1/8 inch thick mild steel version. This was mainly to clean it up and give more metal for the lower magnet in the boot to pull on. I think I can ride a roller coaster now and not lose it. It got a fresh paint job as well. Below is a fresh zoom on the backside corrections. Quote Link to comment Share on other sites More sharing options...
jdouce45 Posted February 28, 2021 Author Share Posted February 28, 2021 And a fresh membership submission set, I think I am about ready to send it in. 3 Quote Link to comment Share on other sites More sharing options...
Aradun Posted March 1, 2021 Share Posted March 1, 2021 Jeremy your mods are spot on. Man that looks good! Excellent job! Very clean and sharp looking. Well done brother! Good luck with your submission. I’ll be looking forward to hearing the good news and your joining the ranks. Quote Link to comment Share on other sites More sharing options...
Chopper Posted March 1, 2021 Share Posted March 1, 2021 Hey Jeremy, I only have one thing to add... You look great. You should send in your application! 😀 1 Quote Link to comment Share on other sites More sharing options...
jdouce45 Posted March 1, 2021 Author Share Posted March 1, 2021 Thanks guys, those were the nods I was looking for. I’ve read about the application process and have thought it through a bit but still have questions. I see that I’m supposed to reach out to my garrison’s GML over what looks like email and provide them with pictures and any other details they may need, then once they have approved, complete the form on the 501st.com website. Is this the correct procedure?Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Chopper Posted March 1, 2021 Share Posted March 1, 2021 If this is your first legion costume, I think my GML had me do the legion application first. Each GML might have a different preference though for their workflow, so I'd just ask them what they'd prefer. 1 Quote Link to comment Share on other sites More sharing options...
Omaha Joe Posted March 1, 2021 Share Posted March 1, 2021 Your Scout looks great, Jeremy!! My first 501st costume I submitted straight to the GML(s). After it was approved is when I received the email from the 501st to fill out and set up that information, but like @Chopper says, it might depend on your GML. Good luck with your submission..!! 1 Quote Link to comment Share on other sites More sharing options...
Retrofire Posted March 2, 2021 Share Posted March 2, 2021 On 2/28/2021 at 6:52 PM, Chopper said: If this is your first legion costume, I think my GML had me do the legion application first. Each GML might have a different preference though for their workflow, so I'd just ask them what they'd prefer. As a formal GML you kinda need the application first before you start reviewing to verify the candidates information. You also can’t “approve” the costume since they aren’t in the membership database yet. Some GMLs are fine with getting both at the same time but it’s best to sign up for the Garrison forums and PM them as to how they wish to handle the process. Every Garrison can be different. I wish you the best of luck with your submission! 1 Quote Link to comment Share on other sites More sharing options...
jdouce45 Posted March 2, 2021 Author Share Posted March 2, 2021 Thanks Guys, I was able to get in touch with the GML and they preferred to receive all images over email and a simultaneous application submission. I've sent in both so things are under way! 2 Quote Link to comment Share on other sites More sharing options...
jdouce45 Posted March 5, 2021 Author Share Posted March 5, 2021 Woohoo!! Just got the approval email, can’t stop smiling!!Sent from my iPhone using Tapatalk 5 Quote Link to comment Share on other sites More sharing options...
Lucasfan7 Posted March 5, 2021 Share Posted March 5, 2021 Just now, jdouce45 said: Woohoo!! Just got the approval email, can’t stop smiling!! Sent from my iPhone using Tapatalk Such an exciting time brother, great job. You will most likely remember this day for the rest of your life, so enjoy it:) Quote Link to comment Share on other sites More sharing options...
BikerScout007 Posted March 5, 2021 Share Posted March 5, 2021 2 minutes ago, jdouce45 said: Woohoo!! Just got the approval email, can’t stop smiling!! Sent from my iPhone using Tapatalk Excellent, Jeremy! Make sure you update your profile to add in all your 501st info and I'll upgrade you to Pathfinder access! Quote Link to comment Share on other sites More sharing options...
Chopper Posted March 5, 2021 Share Posted March 5, 2021 Congrats Jeremy, great job. Quote Link to comment Share on other sites More sharing options...
Omaha Joe Posted March 5, 2021 Share Posted March 5, 2021 Nice work, Jeremy..!! Welcome to the 501st!! 👍 Quote Link to comment Share on other sites More sharing options...
Aradun Posted March 5, 2021 Share Posted March 5, 2021 Never a doubt in my mind Jeremy. You had a solid looking build and did a great job on everything! Congrats on a job well done and welcome to ranks of the Pathfinders.I hope you consider shooting for Lancer and submit an application for Level 2 Certification. Quote Link to comment Share on other sites More sharing options...
jdouce45 Posted March 6, 2021 Author Share Posted March 6, 2021 Thank you guys, I really appreciate the warm welcome and congratulations. No way could I have done it without the positive input, encouragement, and guidance I received here. You guys are a class act, can't thank you enough! I look forward to being a part of this organization and exploring what its all about in the months to come. BTW, I'll be helping my younger brother build one of these here pretty soon (so if you see a guy named cdouce45, you'll know its another Pampa, TX kid!) and I'll likely be starting a Lancer application once I get a new blaster printed and few more outings in the real world with the suit and see what wearing it for more than an hour or so feels like. For now, I'm gonna take a break from building for a couple of weeks and explore the forums, buy some merchandise, and look real close at those Jolly Roger guys, I've got a ROTJ TIE Pilot BBB sitting in the corner wanting some attention! Maybe I'll see some of y'all over there too! So, to close this thread out, I want to say thank you and express my gratitude for the help, the cheers, advice, and your welcoming attitude. This whole thing has been awesome! 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.