JohnReillis Posted January 8, 2020 Share Posted January 8, 2020 Hi everyone! As I own a 3D printer, I wanted to start printing a long blaster, to work on until I have my armor. I've found these files, and I think the DLT-20 on Esty was bought already printed as a kit by member(s) of the forum. I can't really spot things that looks bad, to me they all look nice, but maybe you can have more inputs than me!https://www.etsy.com/fr/listing/652211213/blastech-dlt-20-a-laser-fusil-blaster-de?ref=shop_home_active_8https://cults3d.com/fr/modèle-3d/jeu/dlt-20a-laser-riflehttps://cults3d.com/fr/modèle-3d/divers/stormtrooper-heavy-blaster-rifle-dlt-19x-from-star-wars Quote Link to comment Share on other sites More sharing options...
oneredstar Posted January 8, 2020 Share Posted January 8, 2020 There's a good dlt-19/dlt-19x on thingiverse. It has barrels segments for with the bi-pod and without. Quote Link to comment Share on other sites More sharing options...
JohnReillis Posted January 8, 2020 Author Share Posted January 8, 2020 Well thingiverse being what it is, I can't find anything that looks like what you're talking about Do you happen to have a link, by chance, please? Quote Link to comment Share on other sites More sharing options...
oneredstar Posted January 8, 2020 Share Posted January 8, 2020 It's the one by surfinbird132: https://www.thingiverse.com/thing:3940279 Quote Link to comment Share on other sites More sharing options...
JohnReillis Posted January 8, 2020 Author Share Posted January 8, 2020 Thanks a lot! Doesn't look bad for sure! Quote Link to comment Share on other sites More sharing options...
Dragon_a Posted January 8, 2020 Share Posted January 8, 2020 Your 1st link for the DLT-20a is by April Storm, fantastic model. I’ve made this myself on my Ender 3 pro 2 Quote Link to comment Share on other sites More sharing options...
JohnReillis Posted January 8, 2020 Author Share Posted January 8, 2020 Nice, thanks Do you have a picture of it? Would love to see your result! Quote Link to comment Share on other sites More sharing options...
Dragon_a Posted January 8, 2020 Share Posted January 8, 2020 53 minutes ago, JohnReillis said: Nice, thanks Do you have a picture of it? Would love to see your result! I have one on my instagram 1 Quote Link to comment Share on other sites More sharing options...
JohnReillis Posted January 8, 2020 Author Share Posted January 8, 2020 Very, very nice! On the screenshots, it looks like the barrel shroud is one piece, did you cut it to fit on the ender ? Quote Link to comment Share on other sites More sharing options...
Dragon_a Posted January 9, 2020 Share Posted January 9, 2020 The file comes with the barrel shroud as one piece and a 2 piece version. Obviously I used the 2 piece, however one of them was slightly too long still for the ender so I had to slice that in half. However, it is the half nearest the blaster so is supported entirely by how it slots into the rest of the body. Does that make sense? 1 Quote Link to comment Share on other sites More sharing options...
JohnReillis Posted January 11, 2020 Author Share Posted January 11, 2020 Yes for sure I went with the other DLT-20 juust because. I like the way it's cut. Although both looks really good to me. So I resized it to match more precisely the size of a real STG-44, using the handle has a guide. And I started testing some small parts from the scope. It's going to be reaaally long to print all of it! And then sanding, etc.. But it's a start while waiting to grab an armor 1 Quote Link to comment Share on other sites More sharing options...
MrShadow Posted January 14, 2020 Share Posted January 14, 2020 In case anyone is still interested, I also made a file, available at Pinshape https://pinshape.com/items/58049-3d-printed-dlt-20a-rifle I'm printing the first one, and will keep updating the file to make it more accurate and easy to print and assemble. 2 Quote Link to comment Share on other sites More sharing options...
oneredstar Posted January 14, 2020 Share Posted January 14, 2020 On 1/7/2020 at 7:16 PM, JohnReillis said: Thanks a lot! Doesn't look bad for sure! I've been printing parts of it over the last few weeks in between other parts. Here's a crappy picture of it rough fitted together. 1 Quote Link to comment Share on other sites More sharing options...
JohnReillis Posted January 18, 2020 Author Share Posted January 18, 2020 On 1/14/2020 at 4:24 AM, MrShadow said: In case anyone is still interested, I also made a file, available at Pinshape https://pinshape.com/items/58049-3d-printed-dlt-20a-rifle I'm printing the first one, and will keep updating the file to make it more accurate and easy to print and assemble. Looking veeery good Feel free to post pictures of the print here! I'll probably buy it, even if just to support you for a start, and then print it later after the one I'm doing On 1/14/2020 at 5:01 AM, oneredstar said: I've been printing parts of it over the last few weeks in between other parts. Here's a crappy picture of it rough fitted together. That's big Quote Link to comment Share on other sites More sharing options...
oneredstar Posted January 20, 2020 Share Posted January 20, 2020 On 1/18/2020 at 6:04 AM, JohnReillis said: That's big the mg-34 was not a small gun to start with. 2 Quote Link to comment Share on other sites More sharing options...
JohnReillis Posted January 21, 2020 Author Share Posted January 21, 2020 Yeah, true :D I did one for 28mm scale wargaming, so might have skewed my perspective on it haha! Quote Link to comment Share on other sites More sharing options...
Igneous Posted January 29, 2020 Share Posted January 29, 2020 Currently working on my own scout build and I printed that same DLT-19x. I had a bit of a problem with the scope so I ended up adding some magnets into it and the top of the main gun. probably going to try and do the same with the bi-pod and make it so I can switch between the regular DLT-19 and the DLT-19x. Also will say that I thought the gun felt too light so I ended up getting a stainless steel rod and using that as my central support. Quote Link to comment Share on other sites More sharing options...
star-trooper Posted May 5, 2020 Share Posted May 5, 2020 Hi i am also looking for 3D files for the Dlt-20A, does anyone know the actual length of the Dlt-20A? The trigger portion from April Storm seems abit too big. Isn’t it? The overall length is almost 1.1m. Might need to reduce it by 10 to 15%. Quote Link to comment Share on other sites More sharing options...
Barber Posted May 5, 2020 Share Posted May 5, 2020 15 hours ago, star-trooper said: Hi i am also looking for 3D files for the Dlt-20A, does anyone know the actual length of the Dlt-20A? The trigger portion from April Storm seems abit too big. Isn’t it? The overall length is almost 1.1m. Might need to reduce it by 10 to 15%. The DLT-20a from April Storm is right at 42.5” or 108cm. The grip and trigger portion feels fine in my hand. Overall it looks and feels right to me. I used some pics I took at Disney as some references when looking into the DLT-20a. (There’s a bunch of these blasters on display in Rise of The Resistance ride in Galaxys Edge) I just posted some pics a week ago of my completed build: Quote Link to comment Share on other sites More sharing options...
star-trooper Posted May 6, 2020 Share Posted May 6, 2020 Thanks James Quote Link to comment Share on other sites More sharing options...
JohnReillis Posted May 16, 2020 Author Share Posted May 16, 2020 Long time no post, got busy with work and life Still planning to get a Scout armor, so I started working on my DLT again. Tweaking some parts here and there for easy of print or fitting. STill a long way to go! No idea when I'll be able to prime / bondo and sand, as I live in a appartement ,but I'll see! Quote Link to comment Share on other sites More sharing options...
JohnReillis Posted May 18, 2020 Author Share Posted May 18, 2020 Scope is complete (minus screw to glue in the slots )! Starting to get scared of all the post process I'll have to do haha, but will be worth it I hope! Now let's print the rest. 1 Quote Link to comment Share on other sites More sharing options...
billymod Posted September 23, 2020 Share Posted September 23, 2020 Here is a picture of my DLT-19X I printed 2 Quote Link to comment Share on other sites More sharing options...
sconlon68 Posted March 24, 2021 Share Posted March 24, 2021 I'm starting to print out a DLT-20a from April Storm. I'm using a Kossel XL delta from the frame parts off RobotDigg. It's been a solid workhorse for the mando gauntlets and jetpack I printed for a friend. I should be able to print out the 2 shroud pieces without any issues. We'll see.. I'll keep you posted. 1 Quote Link to comment Share on other sites More sharing options...
Mike Miller Posted November 18, 2022 Share Posted November 18, 2022 hello guys, ive checked thingiverse for a DLT-19X print file with no luck, so does anyone have one they could share with a fello trooper. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.