Kashyyyk BF2 - Officer

[ferra]

Hi!

 

Please find below all the reference pictures I could gather of the officer.

Feel free to share your own so we can study them, but only for this version, please.

https://www.dropbox.com/sh/yo01nbawv60936p/AAAKjx5i_jYJfhJum4w2h3X-a?dl=0

 

 

 

[ferra]

I am adding other pictures posted already on the forums:

 

 

 

 

[ferra]

And now my take on the CRL:

 

Helmet
Camo pattern to simulate on-screen troopers.
Tan base coat.
Camo patterns are colored dark green and flat brown.
Should be lightly weathered.
Full set of black greeblies: 2 breathers, five bar snout piece and visor bolts.
Visor has a green lens.
A rectangular slot is centered in the middle of the visor.

Two 0.5cm x 0.5cm black recessed squares on forehead.

Helmet decal matches the screen-used.
Rear trapezoids and 9 black stripes on back lower left may either be painted or decals.
Side intakes have no netting.

Back of the helmet, visor(inside and out) are painted in a dark olive drab(green color is darker than the one used in the camo).

Part of the front of the helmet has specific design painted in a dark olive drab(green color is darker than the one used in the camo).

Rest of the front of the helmet has a design painted in camo like the rest of the armor including a stripe coming from the top of the center of the "forehead" all the way to the back, ending at the top of the bulge in the back of the helmet.

OPTIONAL Level two certification (if applicable):
Recommended camo colors:
Krylon Khaki Tan base coat.
Panzer Olive Green.

Olive Drab color for special officer markings.

Flat Earth Brown.
Black/grey/white misting.
Optional: paint scrapes may be represented with silver or chrome paint, not to exceed what is seen on screen.
Visor rectangular slot measures 2.25 inches long and 0.5 inches wide.
Rear trapezoids and 9 black stripes on back lower left are recessed in the helmet.
Top of helmet is more rounded than movie model.
Visor has a slight bend in the middle.
 

 

 

Balaclava
A balaclava is a black head sock/hood that is worn under the helmet and is used primarily to hide any view of the wearer's skin and/or facial hair.
 

 

Under Suit
Jacket and pants or jumpsuit.
Dark Camouflage pattern should resemble look of screen troopers.
No multi-cam or digital camo.
No visible pockets when the armor is worn.
Large leg pouches have a biased cut flap on the outside, placed in the correct position.
Off-grey/tan or oatmeal riding patch on inner thigh, made of leather or suede or suede like material.
Shirt with Ribbed neck seal of same material.
 

OPTIONAL Level two certification (if applicable):
British Desert DPM camo dyed brown and black to make them darker.
Leg pouches must be constructed and measure 6 inches high by 4 inches wide by 1.5 inches deep.

 

 

Shoulder Armor
Camo pattern to simulate on-screen troopers.

Tan base coat
Camo patterns colored dark green and flat brown
Should be lightly weathered.

Center of the armor has large stripe painted in a dark olive drab(green color is darker than the one used in the camo).

 

OPTIONAL Level two certification (if applicable):
Recommended camo colors:
Krylon Khaki Tan base coat
Panzer Olive Green

Olive Drab color for special officer markings.

Flat Earth Brown
Black/grey/white misting.
Optional: paint scrapes may be represented with silver or chrome paint, not to exceed what is seen on screen.
 

 
 

Upper Arm Armor
Camo pattern to simulate on-screen troopers.
Tan base coat.
Camo patterns colored dark green and flat brown.
Should be lightly weathered.
Left bicep armor has a gray strap and gray greeblie.
Right bicep armor has a gray greeblie.

Center of the armor has large inverted "T" shaped design aligned with stripe on shoulder armor painted in a dark olive drab(green color is darker than the one used in the camo).

OPTIONAL Level two certification (if applicable):
Recommended camo colors:
Krylon Khaki Tan base coat
Panzer Olive Green

Olive Drab color for special officer markings.

Flat Earth Brown
Black/grey/white misting.
Optional: paint scrapes may be represented with silver or chrome paint, not to exceed what is seen on screen.
Bicep armor greeblies are screen accurate.

 

 

 

Elbow / Forearm Armor
Camo pattern to simulate on-screen troopers.
Tan base coat.
Camo patterns colored dark green and flat brown.
Should be lightly weathered.
2 grey straps for each forearm piece.
Should sit in elbow not in forearm.
 

OPTIONAL Level two certification (if applicable):
Recommended camo colors:
Krylon Khaki Tan base coat
Panzer Olive Green
Flat Earth Brown
Black/grey/white misting.
Optional: paint scrapes may be represented with silver or chrome paint, not to exceed what is seen on screen.
 

 
 

Gloves
black leather from the fingers to the wrists.
back of hand has 2 light gray patches.
Gray strap circles the wrist.
No labels/logos, clips or external straps
 

OPTIONAL Level two certification (if applicable):
Wrist strap has small buckle detail. (seems to be a rectangular metal greeblie)
 

Gauntlets
Gauntlet section is same material as uniform.
Rubber gray greeblies on gauntlets.
 

OPTIONAL Level two certification (if applicable):
Gauntlet greeblie is screen accurate.

Chest Armor
Camo pattern to simulate on-screen troopers.
Tan base coat.
Camo patterns colored dark green and flat brown.
Shouldbe lightly weathered.
4 grey colored greeblies connect the chest and back plates on top bridges and also sides(below armpits).

Chest armor has inverted "T" shaped stripe painted in a dark olive drab(green color is darker than the one used in the camo).

 

OPTIONAL Level two certification (if applicable):
Recommended camo colors:
Krylon Khaki Tan base coat.
Panzer Olive Green.

Olive Drab color for special officer markings.

Flat Earth Brown.
Black/grey/white misting.
Optional: paint scrapes may be represented with silver or chrome paint, not to exceed what is seen on screen.
Armor joins flush on the sides.
Greeblie connectors are screen accurate.

 
 

Back Armor
Camo pattern to simulate on-screen troopers.
Tan base coat.
Camo patterns colored dark green and flat brown.
Should be lightly weathered.
Back plate has a tank seamlessly attached.
Top of the tank is flat with a detail piece painted white with black dial in the center and black greeblies one red and one green buttons.
 

OPTIONAL Level two certification (if applicable):
Recommended camo colors:
Krylon Khaki Tan base coat.
Panzer Olive Green.
Flat Earth Brown.
Black/grey/white misting.
Optional: paint scrapes may be represented with silver or chrome paint, not to exceed what is seen on screen.

 

 

 

Cummerbund
Dark gray base with lighter gray vertical straps.
Closure in the back, covered by tank and rear pouches.
A midsection belt goes around cummerbund.
Belt has 2 vertical black straps on the front.
16 pouches of various sizes and shapes attach to the cummerbund.
Molle vests or variants are not acceptable.
 

OPTIONAL Level two certification (if applicable):
Midsection belt is 2 inches tall and goes around entire cummerbund.
Light gray base with light gray vertical straps(all same tone).
2 vertical black straps have a set of white dotted lines on each side.
 

 
 

Pouches
16 pouches resembling size of screen-used.
Pouches have different closing flap configurations.
Pouches have camo pattern.
Cloth-covered and painted with a tan base and camo pattern to match armor.
2 long front vertical pouches.
2 small rectangular front pouches.
8 small side pouches.
2 long back pouches.
2 large rectangular horizontal back pouches.
 

OPTIONAL Level two certification (if applicable):
Cummerbund pouch sizes as follows:
2 Long front pouches: 7 inches high x 4 inches wide x 1.5 inches deep.
2 small front pouches: 2.5 inches high x 4 inches wide x 1.5 inches deep.
8 small side pouches.
Top 4 small side pouches are 3 inches tall x 4 inches wide x 1.5 inches deep.
Bottom 4 small pouches are 4.5 inches tall x 4 inches wide x 1.5 inches deep.
2 Long back pouches: 7 inches high x 4 inches wide x 1.5 inches deep.
2 rectangular back pouches: 4 inches high x 7 inches wide x 1.5 inches deep.
 

 
 

Belt
Grey with black insets.
2 trapezoid drop boxes hang from belt and belt buckle by 4 tan straps.
Not leather straps, straps are 1/2 inch wide.
Cloth-covered and painted with a khaki base and camo pattern to match armor.
 

 

 
 

Codpiece
Triangular in shape.
Cloth covered and painted in camo pattern to match armor.
May be lightly weathered.
Attaches to backside of belt buckle.

OPTIONAL Level two certification (if applicable):

All made in fabric.
Without "camel toe" look.

 

 

Knee Armor
Camo pattern to simulate on-screen troopers.
Tan base coat.
Camo patterns colored dark green and flat brown.
Should be lightly weathered.
Grey straps for each piece of knee armor.
 

OPTIONAL Level two certification (if applicable):
Recommended camo colors:
Krylon Khaki Tan base coat.
Panzer Olive Green.
Flat Earth Brown.
Black/grey/white misting.
Optional: paint scrapes may be represented with silver or chrome paint, not to exceed what is seen on screen.
 

 
 

Lower Leg Armor
Camo pattern to simulate on-screen troopers.
Tan base coat.
Camo patterns colored dark green and flat brown
Should be lightly weathered.
Shin armor pieces appear seamless.
2 khaki or tan straps on each shin.
Black buckle on the outside and black small clip on the inside on each strap.
Straps end with arrow shape on the inside of the leg, after the clip.

 

OPTIONAL Level two certification (if applicable):
Recommended camo colors:
Krylon Khaki Tan base coat.
Panzer Olive Green.
Flat Earth Brown.
Black/grey/white misting.
Optional: paint scrapes may be represented with silver or chrome paint, not to exceed what is seen on screen.
 

 
 

Boot Caps (Foot Armor)
Camo pattern to simulate on-screen troopers.
Tan base coat.
Camo patterns colored dark green and flat brown.
Should be lightly weathered.
2 black rings on upper outside edge of each boot cap.
 

OPTIONAL Level two certification (if applicable):
Recommended camo colors:
Krylon Khaki Tan base coat.
Panzer Olive Green.
Flat Earth Brown.
Black/grey/white misting.
Optional: paint scrapes may be represented with silver or chrome paint, not to exceed what is seen on screen.
Black rings measure 0.79 inch/2cm in diameter.

 

Boots
Main body of boot is beige - similar to Beige Desert Military Boots.
Boots have a curve shape in the arch area.
Khaki or tan soles.
Should be lightly weathered.
No brand visible.
 

OPTIONAL Level two certification (if applicable):
Boot sole has small arches carved out.
4 small arches on each side of the front of the boot.
2 small arches on each side of the heel.

[ferra]

Notes for discussion, I have no pictures of the backpack topper for this charater, so idea regarding the color.(mainly black or mainly white) - Trying to get more stills

Noticed new detail on helmet(for all helmets) the squares in the forehead.

The inverted T doesn´t go all the way to the backplate, but I would like to get one picture of the transition from front to black plate. - Trying to get more stills

 

[BikerScout007]

Awesome Luis!  This is the one I believe @yoshix wants to build.  Let's see if he's got any input

[ferra]

OK, some more details on the officer, still couldn´t get the angle I wanted, to see what's going on under the armpits....

 

....you will notice however another detail, the topper  is white:

 

[ferra]

To add to the discussion please note similar pose for all the other variants, you guessed it the toppers are all white.

In the game play I think there was a picture where the topper was black, so I am guessing this is a lighting bug just like the leg straps that you can also see look green.

The leg straps are tan...

 

[yoshix]

Fantastic work! Thank you very much for doing this. I have a few details I was hoping you could change or maybe consider. 

[Dart]

I actually really dig this variant. Thanks for all your hard work, Luis! Keep it up!

[BikerScout007]

6 hours ago, yoshix said:

Fantastic work! Thank you very much for doing this. I have a few details I was hoping you could change or maybe consider. 

Absolutely man.  This is the thread where we throw everything up against the wall and see what sticks.  

[ferra]

@yoshix, please let me know your thoughts and if you have friends playing get us in game pictures like the ones you posted earlier.

 

The screen grabs from the menu where you can see the characters in my opinion have a bug that changes the actual colors of some of the details(tank topper and also the leg straps).

 

@Dart and @BikerScout007 please have a look at the tank topper and compare with the scout topper or post your own tank toppers for comparison. I´m asking this cause I know for a fact it doesnt look like the one from bikerchick...

[BikerScout007]

It's not a Biker Scout topper either.  Close, but there are differences.  I would leave the topper as-is with our current Kashy kit, unless you can find someone to manufacture these.  

[yoshix]

On 11/4/2019 at 4:58 PM, ferra said:

To add to the discussion please note similar pose for all the other variants, you guessed it the toppers are all white.

In the game play I think there was a picture where the topper was black, so I am guessing this is a lighting bug just like the leg straps that you can also see look green.

The leg straps are tan...

I believe we discussed this in another thread, how can we tell if its a bug? I have at least two in game photos showing the white control panel.

[yoshix]

I can post what I have but I don't think it varies much for what you have. 

 

[yoshix]

"Gauntlets
Gauntlet section is same material as uniform.
Rubber gray greeblies on gauntlets."

Is this to say that the standard gloves will not work? I fear that will be a bit difficult to modify. 

[yoshix]

"Cummerbund
Dark gray base with lighter gray vertical straps."

It seems to me that the cummerbund is all dark gray. Also that the pouches look the same color of dark grey. Some even look to be the dark green but not some much the traditional camo. What do you think?

[yoshix]

On 11/2/2019 at 12:24 PM, ferra said:

Noticed new detail on helmet(for all helmets) the squares in the forehead.

Great find. I saw this and forgot to add it to my helmet. Im think to just paint them in.

[Dart]

10 hours ago, BikerScout007 said:

It's not a Biker Scout topper either.  Close, but there are differences.  I would leave the topper as-is with our current Kashy kit, unless you can find someone to manufacture these.  

I agree with this. If people want to paint the ones that come with the kit white, that's fine. If someone wants to be an industrious 3rd party source for the toppers, then that can happen as well.

[BikerScout007]

18 hours ago, yoshix said:

"Cummerbund
Dark gray base with lighter gray vertical straps."

It seems to me that the cummerbund is all dark gray. Also that the pouches look the same color of dark grey. Some even look to be the dark green but not some much the traditional camo. What do you think?

Be really nice to get some screenshots where the torso is not covered in shadow.  

[ferra]

20 hours ago, yoshix said:

"Gauntlets
Gauntlet section is same material as uniform.
Rubber gray greeblies on gauntlets."

Is this to say that the standard gloves will not work? I fear that will be a bit difficult to modify. 

Take the wampaware gloves out of the equation, it´s easier to get simple  black leather gloves and do the grey pieces mods without the gauntlet.

 

The gauntlet is a separate thing and that seems way easier to do now.

[ferra]

20 hours ago, yoshix said:

"Cummerbund
Dark gray base with lighter gray vertical straps."

It seems to me that the cummerbund is all dark gray. Also that the pouches look the same color of dark grey. Some even look to be the dark green but not some much the traditional camo. What do you think?

Cummerbundwise I don´t think so, specially seeing the live action pictures, it seems like two tone. But in doubt I leave another option for the level 2.

 

Pouchwise I think some of the models are camo the pics so far for the officer do seem drab or grey but darker than the cummerbund.

[ferra]

2 hours ago, BikerScout007 said:

Be really nice to get some screenshots where the torso is not covered in shadow.  

Definately want to see under the arms too!

[yoshix]

15 hours ago, ferra said:

Cummerbundwise I don´t think so, specially seeing the live action pictures, it seems like two tone. But in doubt I leave another option for the level 2.

I have to disagree. Everything that I have seen so far leads me to believe it is one color with a the straps as texture. 

15 hours ago, ferra said:

Pouchwise I think some of the models are camo the pics so far for the officer do seem drab or grey but darker than the cummerbund.

I don't see any pouches that has the camo, or at camo that matches the armor like an episode 3 kashyyyk. 

[yoshix]

17 hours ago, BikerScout007 said:

Be really nice to get some screenshots where the torso is not covered in shadow.  

I think this is one of the best ones that i have for that.

15 hours ago, ferra said:

Definately want to see under the arms too!

This photo makes it look like the chest and back come together in the standard back overlapping the front that we are used to. 

[ferra]

Watching the top pics again I am agreeing with you more and more on the cummerbund. Grey one tone.

The pouches don´t look grey to me, light olive drab? Sage? and the spots in the cummerbund and pouches are weathering=dirt?

 

Now for the joining of the chest and torso I tought there was a greeblie like on the shoulders, but there isn´t after all, it´s plain ol'Kashyyyk as always: overlaping back to front.