jochensen Posted September 12, 2019 Share Posted September 12, 2019 Hi everyone - It's so great to see your progress on your builds on this forum. It's been of great help to my build so far! I've started working on my own build a couple of weeks back - with the Armory Shop kit as well - and I'm getting along well, I think but I do have questions with regards to the CRL: 1) Belt The CRL image of the belt has two small black leather pouches and a bigger one but on recent images I've seen from your builds (prior to the CRL release, I think, though) and also on the Hot Toys figure, there seem to be two big leather pouches and one smaller pouch. Is the latter the way to go? I want to make sure my belt will be approvable befor I start with attaching any elements. I've attached an image of my belt attachments loosely laid out. 2) Cod Piece As per the CRL, the indent on the cod piece is supposed to mirror the one on the ab section. That's not exactly the case with this kit. Will it still be approvable? Many thanks in advance! 2 Quote Link to comment Share on other sites More sharing options...
Haydeus Posted September 12, 2019 Share Posted September 12, 2019 Excellent questions! I have the exact same kit as you so I will be interested to see what they say! Quote Link to comment Share on other sites More sharing options...
BikerScout007 Posted September 12, 2019 Share Posted September 12, 2019 Interesting. I'm realizing that we've never had a production photos where all 3 black boxes can be seen in the same shot so their sizes could be compared. Looking at the Hot Toys I'd say your current configuration is correct, but I would like to take a closer look at all the photos! As for the codpiece, it doesn't seem like a great match when paired up like that, but I'd like to see it with the belt running between them. it may not be as noticeable. 1 Quote Link to comment Share on other sites More sharing options...
Ruthar Posted September 12, 2019 Share Posted September 12, 2019 Heya, Jochen! I saw exactly what you saw with the Hot Toys figure - the belt boxes have two larger and one smaller on that figure. I came up with some dimensions on my build thread that work for me, so that might help you get a general idea. For what it's worth I think your setup above looks great! As Mickey said, the pieces don't look like much of a match when you have them against one another, but with the belt in between it shouldn't stand out too much. I have the same maker and setup - from certain angles, it looks like it matches fine, such as in the shot below. It isn't an exact mirror, but it works! 1 Quote Link to comment Share on other sites More sharing options...
jochensen Posted September 12, 2019 Author Share Posted September 12, 2019 43 minutes ago, BikerScout007 said: As for the codpiece, it doesn't seem like a great match when paired up like that, but I'd like to see it with the belt running between them. it may not be as noticeable. Lacking pictures with the belt attached myself still, please check out Ruthar's build thread and approval pictures here: Looks like the Hot Toys figure seemed to inform most revisions to the CRL text but the according images don't reflect that yet (neither the belt pouches nor the matching indents on the ab section and cod piece). Ruthar also contributed to the CRL thread about the belt pouch size definitions and it looks like the comment was well received but hasn't made it into the CRL. I am not sure if production photos exist that show the full belt array. This spread from the Solo Visual dictionary seems to imply that - as he says - there are two big boxes and a smaller one as per the Hot Toys figure. 1 Quote Link to comment Share on other sites More sharing options...
jochensen Posted September 12, 2019 Author Share Posted September 12, 2019 Sorry, overlapping messages 🙂 Quote Link to comment Share on other sites More sharing options...
jochensen Posted September 12, 2019 Author Share Posted September 12, 2019 13 minutes ago, Ruthar said: As Mickey said, the pieces don't look like much of a match when you have them against one another, but with the belt in between it shouldn't stand out too much. I have the same maker and setup - from certain angles, it looks like it matches fine, such as in the shot below. It isn't an exact mirror, but it works! Exactly, I have the same kit as you and as such I'd be happy if it still was approvable now that the CRL is in place. I believe yours was approved before, right? The problem is that I can't really chance anything on the cod piece - Denis' kit seems to be the only available kit and I guess it is what it is with regards to the mismatch, so if it's not approvable then I'm kind of stuck... The ab section should be worm with the flat front section centered, I think, and the cod piece needs to be centered below, right? So they simply cannot match unless I turn the ab section slightly sideways... Quote Link to comment Share on other sites More sharing options...
Ruthar Posted September 12, 2019 Share Posted September 12, 2019 Weird seeing my suit in its older, cleaner state! 1 minute ago, jochensen said: Exactly, I have the same kit as you and as such I'd be happy if it still was approvable now that the CRL is in place. I believe yours was approved before, right? The problem is that I can't really chance anything on the cod piece - Denis' kit seems to be the only available kit and I guess it is what it is with regards to the mismatch, so if it's not approvable then I'm kind of stuck... No, that same text existed when I built mine, too. I don't think the term "matches" necessarily means that "the cutout is exactly the same size" - I would suggest reading it more as "the indent of the abdomen and the indent of the cod piece align" if that makes sense. 1 Quote Link to comment Share on other sites More sharing options...
BikerScout007 Posted September 12, 2019 Share Posted September 12, 2019 9 minutes ago, jochensen said: Sorry, overlapping messages 🙂 No problem, I've been working out language with our LMO @Haskso we can make this change ASAP. We're going to go with this so we don't punish anyone who has wrong sized boxes: The belt contains 3 leather or leather-like pouches with hard plate and press stud on each flap they are worn one to the right and two the left of the 3 center white boxes the pouches have no visible stitching. L2 says "Belt boxes and pouches conform to size and shape of screen references." So you will need the proper sized boxes for that. 2 Quote Link to comment Share on other sites More sharing options...
Ruthar Posted September 12, 2019 Share Posted September 12, 2019 4 minutes ago, BikerScout007 said: No problem, I've been working out language with our LMO @Haskso we can make this change ASAP. We're going to go with this so we don't punish anyone who has wrong sized boxes: The belt contains 3 leather or leather-like pouches with hard plate and press stud on each flap they are worn one to the right and two the left of the 3 center white boxes the pouches have no visible stitching. L2 says "Belt boxes and pouches conform to size and shape of screen references." So you will need the proper sized boxes for that. Excellent! 1 1 Quote Link to comment Share on other sites More sharing options...
Hask Posted September 12, 2019 Share Posted September 12, 2019 CRL has been updated, it may take a few hours to show. 2 Quote Link to comment Share on other sites More sharing options...
jochensen Posted September 12, 2019 Author Share Posted September 12, 2019 Thanks everyone for your feedback! I'll continue with the belt and cod piece then. I'll send pictures soon! 2 Quote Link to comment Share on other sites More sharing options...
BikerScout007 Posted September 12, 2019 Share Posted September 12, 2019 Great. And looks like we're going to need updated photos for the CRL. @Ruthar? 1 Quote Link to comment Share on other sites More sharing options...
Ruthar Posted September 12, 2019 Share Posted September 12, 2019 1 minute ago, BikerScout007 said: Great. And looks like we're going to need updated photos for the CRL. @Ruthar? On it! Quote Link to comment Share on other sites More sharing options...
wingnut65 Posted September 13, 2019 Share Posted September 13, 2019 Great questions, Jochen. Glad to see the crew was available to jump in and resolve the concerns. I really hadn't noticed the indents on my armor, but mine matches yours. And, my GML had no issues with the variation. Really, with the belt and boxes in place, it really isn't noticeable. Good Luck with your build! Quote Link to comment Share on other sites More sharing options...
Hask Posted September 13, 2019 Share Posted September 13, 2019 New txt should now be visible 1 Quote Link to comment Share on other sites More sharing options...
jochensen Posted September 26, 2019 Author Share Posted September 26, 2019 I finally got to wear the armor for the first time today... and found a couple of things that I need to address but I‘m pretty happy with the progress so far. The belt pouches are hard to see on this image so I‘ll send another pic for that once I fixed the baton holster that I accidentally ripped off while trying to squeeze into the semi closed ab section with the belt attached ...Gesendet von iPhone mit Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
jochensen Posted October 20, 2019 Author Share Posted October 20, 2019 Okay, I think I‘m finally there with my build and decided to take approval pictures today that I wanted to share here as well!Gesendet von iPhone mit Tapatalk 2 1 Quote Link to comment Share on other sites More sharing options...
Hask Posted October 20, 2019 Share Posted October 20, 2019 Fingers crossed for you 1 Quote Link to comment Share on other sites More sharing options...
Ruthar Posted October 21, 2019 Share Posted October 21, 2019 Nice work, good luck with approval! 1 Quote Link to comment Share on other sites More sharing options...
jochensen Posted November 4, 2019 Author Share Posted November 4, 2019 And I‘m ready for duty! I got my approval today Gesendet von iPhone mit Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
Hask Posted November 4, 2019 Share Posted November 4, 2019 Most Excellent, well done. Quote Link to comment Share on other sites More sharing options...
BikerScout007 Posted November 5, 2019 Share Posted November 5, 2019 On 11/4/2019 at 12:05 PM, jochensen said: And I‘m ready for duty! I got my approval today Gesendet von iPhone mit Tapatalk Awesome work! Quote Link to comment Share on other sites More sharing options...
star-trooper Posted November 7, 2019 Share Posted November 7, 2019 Congratulations Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.