TK-602 Posted April 24, 2019 Posted April 24, 2019 Hey guys, Ran into a snag. Whats everyone doing to attaching the hump to the back? I have a Moncal kit and the bottom rivet on the hump is too far from the back piece to be riveted in place, without possible causing too much pressure and ripping through the ABS. I'm tempted to cut a panel in the back piece and plastic weld or CA glue from the inside. What have you guys done?
BikerScout007 Posted April 24, 2019 Posted April 24, 2019 48 minutes ago, TK-602 said: Hey guys, Ran into a snag. Whats everyone doing to attaching the hump to the back? I have a Moncal kit and the bottom rivet on the hump is too far from the back piece to be riveted in place, without possible causing too much pressure and ripping through the ABS. I'm tempted to cut a panel in the back piece and plastic weld or CA glue from the inside. What have you guys done? Strapped it to the back armor with 1/2 inch elastic, like in the film 2
Aliaz Posted April 24, 2019 Posted April 24, 2019 That is good advice! Skickat från min iPhone med Tapatalk 1
Chopper Posted April 24, 2019 Posted April 24, 2019 I strapped mine with the 0.5" elastic, as well as some velcro tabs to keep it from rattling around.
762s Posted April 24, 2019 Posted April 24, 2019 a free floating tank is cannon its not secured to the armor in any way and its only held on with the elastic! i wear my tank that way ... i cant tell how many times ive been thankful having it like that due to people wrapping theirs arms around you for pics and then drag their arms down across the tank ... the free floating method moves the tank out the way and it springs right back into place or close enough
TK-602 Posted April 25, 2019 Author Posted April 25, 2019 I didn’t know about the tank being free floating...? I’ve always been curious about the strap too. I never imagined it was meant to hold the tank in-place. I wound up going with using the CA glue and simulating the strap. Thanks for the info lads.
Stroker Posted April 25, 2019 Posted April 25, 2019 6 hours ago, TK-602 said: I didn’t know about the tank being free floating...? I’ve always been curious about the strap too. I never imagined it was meant to hold the tank in-place. I wound up going with using the CA glue and simulating the strap. Thanks for the info lads. Yes that's the way it was done in the movie. I did mine like this and its saved my tank several times along with making it easier to carry in my armour bin. 1
Lawless Scout Posted April 28, 2019 Posted April 28, 2019 Yup! Velcro on inside of back piece and then glued Velcro strips to each side of elastic band that was riveted to tank. Viola. Easy.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now