Ctschurman Posted February 3, 2019 Share Posted February 3, 2019 Title kind of explains it all...does anyone have any tips for me? I recently bought a cummerbund set and it easily folds down the center like a....yeah. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Chopper Posted February 3, 2019 Share Posted February 3, 2019 Is the bund and cod connected as a single piece, or are they two separate parts? The most common issue is that the cod is positioned too low and then folks pull it between the legs with the strap. This causes the dreaded toe effect. Show us some photos and we'll take a look. Quote Link to comment Share on other sites More sharing options...
Ctschurman Posted February 3, 2019 Author Share Posted February 3, 2019 I’ll post some pictures later. I should have done that in the first place haha. But it’s two pieces. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
BikerScout007 Posted February 3, 2019 Share Posted February 3, 2019 It helps to have a fabric stabilizer inside of it. The screen ones used buckram. Which is what hat brims are made from. If there is just batting in there it will fold. And like Chopper said, keep the cod strap loose. 1 Quote Link to comment Share on other sites More sharing options...
Aliaz Posted February 3, 2019 Share Posted February 3, 2019 Also make sure it sits infront of your crotch. It should not go between your legs. 3 Quote Link to comment Share on other sites More sharing options...
Retrofire Posted February 3, 2019 Share Posted February 3, 2019 Also make sure it sits infront of your crotch. It should not go between your legs.THIS^^^^The cod goes in front not under. Just the strap should go under but remain loose enough not to pull on the cod. 3 Quote Link to comment Share on other sites More sharing options...
Ketchup Posted February 4, 2019 Share Posted February 4, 2019 As a thick-thigh lady, great advice here. Make sure the cod does not go between your legs, is not pulled tight, and has some sort of reinforcement. (I use 3 mm EVA foam in mine, works great!) 2 Quote Link to comment Share on other sites More sharing options...
Lawless Scout Posted February 13, 2019 Share Posted February 13, 2019 All great notes indeed! I use the thick fabric stiffener found at most fabric stores. I also did a double stitch at bottom where the elastic is sewn into the cod for just a tad bit more stiffness. I just did this one and pretty happy with how it sits. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.