JoeShoe Posted December 17, 2017 Share Posted December 17, 2017 Hey friends Does anyone know of a seller for the Red LEDs that go into the E22? I recently finished building and painting my Sean Fields E22, and fitted a surefire m300 to it, but i'd like to make it that much more realistic. Unfortunately, I'm not super great at working with electronics in really confined spaces, so the less delicate soldering i need to do, the better! Quote Link to comment Share on other sites More sharing options...
TK8271 Rogue Trooper Posted December 17, 2017 Share Posted December 17, 2017 I don’t know of anyone making kits , but I done my own , all you need is red led lights , wiring , on/off switch and battery connection , if you look at my build it’s there. Quote Link to comment Share on other sites More sharing options...
JoeShoe Posted December 17, 2017 Author Share Posted December 17, 2017 ive looked at your posts, but a lot of the pictures are no longer visible (the whole photobucket being trash thing) I guess my main interest is in figuring how to wire up the 3 lights in the hengstler counter - im not quite sure where to hide the rig/wires for it, or if i could just run a wire from the counter back to the body. Quote Link to comment Share on other sites More sharing options...
TK8271 Rogue Trooper Posted December 18, 2017 Share Posted December 18, 2017 I ran a wire from the bottom inside of the Hengstler to where it is closest to the body and near enough touches it. That way the wire is basically well hidden amd can’t be seen. Quote Link to comment Share on other sites More sharing options...
JoeShoe Posted December 19, 2017 Author Share Posted December 19, 2017 any chance you have photos of your wiring job? If not, no worries. Im just trying to put together as complete a picture of what i want to do before i go drilling holes and cutting away portions of my E22. 1 Quote Link to comment Share on other sites More sharing options...
TK8271 Rogue Trooper Posted December 20, 2017 Share Posted December 20, 2017 I lost a lot of the pics with photbucket , but here is what I have Hengstler Rear Sides Then covered with Perspex red which I can find the oic off Two lights under the touch Then glued to the M Plate All the wires put through to the end where I joined them and out in a battery holder. Again pictures lost Here it is finished I have a hidden on/off switch just under the cheek piece 1 Quote Link to comment Share on other sites More sharing options...
JoeShoe Posted December 22, 2017 Author Share Posted December 22, 2017 awesome! This is exactly what i needed Thanks for the help! Quote Link to comment Share on other sites More sharing options...
ST10772 Posted March 13, 2018 Share Posted March 13, 2018 What sizes of LED's did you use? Quote Link to comment Share on other sites More sharing options...
TK8271 Rogue Trooper Posted March 13, 2018 Share Posted March 13, 2018 What sizes of LED's did you use? 5mm for rear sides 3mm for under the touch and hengstler Sent from my iPad using Tapatalk Quote Link to comment Share on other sites More sharing options...
ST10772 Posted March 15, 2018 Share Posted March 15, 2018 What size of resistor did you use also? Quote Link to comment Share on other sites More sharing options...
TK8271 Rogue Trooper Posted March 15, 2018 Share Posted March 15, 2018 What size of resistor did you use also? Sorry mate , I can’t remember Sent from my iPad using Tapatalk Quote Link to comment Share on other sites More sharing options...
Eynonz Posted March 16, 2018 Share Posted March 16, 2018 What size of resistor did you use also? This may be of use to you. https://www.hobby-ho...ics/ledcalc.php 1 Quote Link to comment Share on other sites More sharing options...
ST10772 Posted March 16, 2018 Share Posted March 16, 2018 Thank You!!! Quote Link to comment Share on other sites More sharing options...
WEBS Posted July 11, 2021 Share Posted July 11, 2021 Would any of you guys be willing to install my Lights for my E22. If so send me a quote. I couldn't access the picts in the above thread to see what TK8271 posted. Or if anyone else could post picts.... Quote Link to comment Share on other sites More sharing options...
WEBS Posted July 21, 2021 Share Posted July 21, 2021 Can anyone help me with the LEDS for my E22? As I said for some reason TK8271's picts are not letting me view them. I have everything I need but the seller sent no instructions or diagrams to help me install. So if JoeShoe or TK8271 can send me any info please do so, I would greatly appreciate it. Even those picts will probably help that I cant see. I messaged the seller twice so far with no response so I was hoping my brothers could help me out. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.