kacrut

Congratz @Jakeputt🤘🏻🙏🏼 and Thank youuu @ferra 🤘🏻🤘🏻👍🏼👍🏼🙏🏼

Congratulations @AradunFF🤘🏻🤘🏻🤘🏻🙏🏼👍🏼👍🏼

Congratulations!, all the Best... 🤘🏻🤘🏻👍🏼👍🏼🙏🏼

😁 😁🙏anytime... Happy Fun build.. Ooh, don't forget "measure twice, cut once"... Slow and steady. Goodluck. Louis DZ-17026

You Can see my build here Or just search in the forum "kropserkel helmet build"

I found this from his(Kropserkel) Fb album page https://i.postimg.cc/QCXHMNJT/FB-IMG-1652336930183.jpg https://i.postimg.cc/bJ0Z8SkP/FB-IMG-1652336710568.jpg https://i.postimg.cc/QCXHMNJT/FB-IMG-1652336930183.jpg Hope that helps.

Congratz @Minimo🤘🏼🤘🏼🤘🏼👍🏼👍🏼👍🏼🙏🙏🏼

I'm planning to add a chin cup, since i do have a MLC chin cup but i have to scale down a bit to fit with my chin, i kinda followed a method from the forums here, i forgot who it was.... i remember that i bookmark it,.. geezz, i really forgot who's. .so sorry guys. https://youtu.be/NLRnyhjPWfw and add some method by 'Evil Ted' ... anyway, here's mine. 1st I put masking tape all over the MLC chin cup, and then i trim off the excess maskin tape.. then I peel it off, cut the curves to flatten it. ... placed it on a piece of papper. http:// http:// http:// http:// Sorry i forgot to take a details progress pictures. I'm planning to use this pattern with 2mm for the base and 1mm for the front part of the chin...

And lastly.. Visor back area,.. the side part thingy. Near the screw... here's the pictures. http:// I used 1mm ABS plate.. about 1cm devided half... one side i made some angled cutting for easy to bend.. Not using a heqt gun for this part.. i just followed the original curved, glued with super glue... i will sanded that returned edge. http:// I made that returned edge from Papercraft/papermodeling method.. it's called a 'tab' .. here's the example pictures http:// http:// http:// http:// http:// http:// http:// http://

Me too, and I'm kinda shy-ish person that's why i choose a full closed face type of armor..like Jawa's and hopefully when it finnished a Scout trooper Heheh.

http:// Alteco epo putty. ... and please stand by,.. my internet are becomes a snail..so, ..yea' we'll be right back..🤦🏻 So, continue... After a bit of sanding, I put some spot putty http:// http:// http:// And some more spot putty for the face plate, upper visor etc. http:// http:// http:// http:// http:// Ooh, nearly forgot... spot putty i use After i sanded all the ABS paste smooth with #300 then up to #1000 with a warm soapy water.. it's messy, i remember i got a cramp on my right arms haha.. and i can still hearing myself singing...just keep sanding...just keep sanding, what do we do sanding keep sanding (nemo). http:// http:// http:// http:// http:// http://

My 1st ever Biker scout helmet build (Kropserkel) Hi!, guys... ever since i join the Virtual Armor party streaming several days ago, i decided to post my Kropserkel helmet build... I already made my Working in progress (Not Finnished yet) thread on our Garuda Garrison Indonesia web forum, this is gonna be the same WIP. So, here we go.. 1st of all I got the helmet partialy build, i guess who ever trying to build it just give up http:// http:// http:// As you can see the helmet already glued with E6000 (Thank goodness :D).. so i decided to take it apart with warm water, a bit of soap, and gently pry it with plastic scraper.. http:// http:// http:// http:// http:// http:// ---place foto--- After careful inspections.. i see, the Visor (bottom)part returned edge are partialy cut/gone, Visor opening are too wide, the Face plate (snout placement-upper side) had a (slightly) bump, http:// http:// http:// and helmet back side(left-right) cut in 90degres angle, I'm afraid that's gonna be Cracked over time... so I rounded the 90angle with sandpaper, and made a new patch with 1mm ABS plate, glued with super glue+some baking soda to filled some tiny gap. http:// http:// ....and strengthen the back side of it with 1mm ABS.. glued with E6000. Then pasted the edged with ABS paste. http:// http:// And for the Visor bottom part, i made a returned edge from 1mm ABS plate.. I made a template, roughly about 1cm, bend it with a heat gun or in my case a lighter then attached it with super glue. http:// http:// http:// http:// Then i use a two part putty.. it's called Eppo Putty.. i like to use this kind of putty because its really easy to shape(?) just with a bit of water to shape it, before its turned to solid.... and it's easy to sanded... well, kinda, Haha. http:// http:// http:// http://

I watched the Virtual Armor Party Q2 2022 Video.. I'm so sorry guys, i think it was my Mic that causing kinda statics noises.. every time I unmuted.. I didn't hear it on my end when streaming... so Sorry. 🙏🙏

Wow.. $108!! for one piece replacement, Yea' that's way up there.. Hope you'll find a Reasonable shipping or a shope near you. 🤘🏼🙏

I found this on Galactic Armory hope that Help.

Great time..Thank you for doing Virtual armor party..and finally seeing some of the faces... alot of tips and input, Thank youuuu. Stay Safe and Healthy guys. Louis K (DZ-17026)

April 9th..got it.👍👍 I'll try to log in, already add to my reminders. it's gonna be April 9th, around 23:00 pm for me in Indonesia, Jakarta. .. coffee, a cup or two should be ok😁👍🤘🏼🤘🏼🙏.

Congratulations sir. 🤘🏼🤘🏼🙏🏼🙏🏼👍👍👍

Buckets Off. My Condolences to his family and friends

..Darnit, i just click 3-4 times the picture with "+8" on it... then i realize it just one pictures. LOL! it's 02:05ish AM on my part of the world... Good Nite.

Ok, I'll try from tapatalk... Thank you... Edit:.. yup, I Can see the picts using tapatalk..

...is it my mobile browser have a problems or the pictures link maybe broken?, I can't view it... I'm using fire fox mobile browser( ver. 89.1.1) Thank you, Stay safe and Healthy everyones. Louis (dz17026)

Hi, Matt.. any update with your build?.. Stay Healthy and Safe. \m/

Thank you for doing this.

Hi, Phil.. just to let you know.. your helmet building are useful for my future build.. and I Thank you for that. I planning to bought another Scout helmet, don’t know from which vetted makers, as my old MLC (unbuild) helmet Not passed Lancer Level now . I think I’m gonna build it as a cool conversation display so, anyway. Phil please Continue your WIP.. it going to be worth-it ... you’re gonna see when you’re done and passed the review... then start Trooping or (Virtual)Trooping.. some kids, neighbors, nephew?, looks at you in BikerScout armor!!?..!! Maan that’s gonna be Awesomes!!! I know that true, when i put my jawas... and somebody yelled ‘Utini!!’ Haha. Priceless ... Ooh and stay away from the tree.. tree are Not Friendlies *permissions to save your helmet build progress picts. Thanks Louis K