Flero Posted April 14, 2012 Share Posted April 14, 2012 GOOD NEWS : My Bucket is 90% done, and looks awesome. BAD NEWS : Ran into a snag with the SC TD and Don Jarr Greebs. It looks like the Indention running along the back of the TD is smaller for SC then others. The Don Jarr greebs look good, but they are to wide to fit the TD. SOOOOO, im thinking i need to cut the Greebs down to fit, or should i cut out some of the TD to fit the full size greebs? Anyone else run into this problem? Quote Link to comment Share on other sites More sharing options...
Flero Posted April 14, 2012 Author Share Posted April 14, 2012 Quote Link to comment Share on other sites More sharing options...
Griffin-X Posted April 14, 2012 Share Posted April 14, 2012 Noooo...don't do it man. Use some double-sided tape or a Velcro strip instead. I've heard of folks using an ABS shim too. Quote Link to comment Share on other sites More sharing options...
Dart Posted April 14, 2012 Share Posted April 14, 2012 I'll echo the above post. My MC TD is also too narrow so I just shimmed it with some plastic I had and that was that. Quote Link to comment Share on other sites More sharing options...
bjsavage7 Posted April 14, 2012 Share Posted April 14, 2012 I wouldn't recommend cutting it either. I used the velcro strip like Jim said, and it worked fine. Quote Link to comment Share on other sites More sharing options...
4505Marcel Posted April 15, 2012 Share Posted April 15, 2012 Yup just shim it and fit them over the slot, failing that source anouther TD box with a wider slot, the proper ones have a wider slot the circle greeblie side as well, so they shouldnt be the same. Quick fix is to shim though Quote Link to comment Share on other sites More sharing options...
Cyber Scout Posted April 16, 2012 Share Posted April 16, 2012 Yes sit a ABS shim the same size as the greeb that will do the job Quote Link to comment Share on other sites More sharing options...
StudioCreations Posted April 20, 2012 Share Posted April 20, 2012 I totally agree with the sentiments in the replies on this thread so far, shim the greeblies for the time being.... and in a couple weeks, email me about getting a replacement box that is way more accurate (I am about 1 week away from vacforming the new thermal det box prototype). Quote Link to comment Share on other sites More sharing options...
Griffin-X Posted April 20, 2012 Share Posted April 20, 2012 I totally agree with the sentiments in the replies on this thread so far, shim the greeblies for the time being.... and in a couple weeks, email me about getting a replacement box that is way more accurate (I am about 1 week away from vacforming the new thermal det box prototype). Good deal Jeff...you rock. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.