Southscout Posted April 9, 2012 Share Posted April 9, 2012 Hi everyone I've ordered an unpainted MC helmet and it's still some weeks away so I have plenty of time for planning and choosing paints. Is there anyone here that has use Plasti-kote White Gloss paint for their helmet and has a good (or bad) experince of it? I guess with that paint there is no need to apply and extra coat of gloss, or? I have seen that most people use Krylon, but that doesn't seem to exist on the European continent at all... All help appreciated as usual Quote Link to comment Share on other sites More sharing options...
Chex Posted April 9, 2012 Share Posted April 9, 2012 When I had to repaint mine, I used Rustoleum Gloss white, the nice expensive kind, and it worked great. You'll want to prime it, sand it, paint it white in light coats, with some wet sanding with a high grit sand paper, then one final coat. Should work, but everything works differently for different people. Good luck, and if you have questions, I'm sure some people who have painted other buckets can chime in as well to offer some advice. Quote Link to comment Share on other sites More sharing options...
elwyn5150 Posted April 13, 2012 Share Posted April 13, 2012 Did you have to repaint because of that leaking of colour? That's why I need to repaint. Quote Link to comment Share on other sites More sharing options...
lonewolf Posted April 15, 2012 Share Posted April 15, 2012 Use a primer spray first, this will help. A bright white spray can should do the trick, just finely spray from a good distance, and resist the urge to do one heavy coat, this is the main reason for runs and sloppy finishes. A few light coats is the way to do it. Prior to any painting use panel wipe to wipe the whole helmet down, finger prints are oily so avoid over touching it as well. Use a fine wet and dry sandpaper, 250-400 grit between coats. Choose a dry day, and if a fly sticks to the fresh paint leave it on, it is easy to remove after, trying to get it off will wreck the paintjob.Sorry all you fly lovers! I can't advise make of paint, just avoid bargain paints. Quote Link to comment Share on other sites More sharing options...
ukscout Posted April 16, 2012 Share Posted April 16, 2012 @John - do you use a white under coat? or Grey undercoat? Quote Link to comment Share on other sites More sharing options...
lonewolf Posted April 16, 2012 Share Posted April 16, 2012 Hi Neil, I used grey , I know the originals were grey primer colour, the unfinished original and the scratches on the screen used helmets possibly shows this. I hope never to see any scratches on my lid, DeathStar pen pusher! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.