Boba Leo Posted September 26, 2011 Share Posted September 26, 2011 Goodfellas I'm back!!!! Thank you very much everyone for the feedback, especially Dave (Witness) for the information provided. Ok, with my friend Christian (Arie Tov) just finished designing the “new detonator greeblie board†into two parts, "The Board and the cylinder" The measures were bounded with my MONCAL armor Dimensions: Length 4.5 cm, Width: 2.3 cm, thickness 5 mm. My friend did the design in this place www.shapeways.com after this design, print and send the 3D impression of what design to the requested destination. “You only have to pay for 3D printing, which makes the company and shipping†I want to clarify that THIS IS NOT A RUN, this is a gift than made to me my friend and I do the same thing to BSN and all its members. Any member can register at this site and ready. You can select the type of material to 3D print, I have used for the board and the cylinder " Black Detail " I've been very lucky with this place (BSN) and I am very grateful. Clarification Note: I have not yet received mine, it is very probable that we have to make corrections to the various measures. Good luck to all !!!!!!!!!!, Abrazo grande Leo Quote Link to comment Share on other sites More sharing options...
automaton Posted September 26, 2011 Share Posted September 26, 2011 This is very cool!! Thank you so much (and your friend). Quote Link to comment Share on other sites More sharing options...
chimei Posted September 26, 2011 Share Posted September 26, 2011 This has to be one of the coolest things yet. Always wanted to get something "printed" into 3D. Thanks Leo! Quote Link to comment Share on other sites More sharing options...
Guest Arie Tov Posted September 26, 2011 Share Posted September 26, 2011 Hi, my name is Christian (Arie Tov), rebel friend of Leo, who made ​​me aware of the discoveryhe had made and could work with what he had done. With some modifications, because I did not think the entire part of the rank bar Endor command would be useful, besides the cost, we arrive at greeblie has been posted. This is a start, at least until all find out where it came from and get to the original pieces as possible, which is what we all want. A greeting and I hope this helps and I am aware of the improvements that can be applied tothis first design. Christian Ps: Sorry for my English. Quote Link to comment Share on other sites More sharing options...
Wickedfluxx Posted September 27, 2011 Share Posted September 27, 2011 3D printing is amazing stuff! I saw a turbo prop at Cisco Live 2011 that was made up completely from 3D printed parts, unreal! Great stuff here! Quote Link to comment Share on other sites More sharing options...
Guest Arie Tov Posted September 27, 2011 Share Posted September 27, 2011 We are going to carry out an update of the greeblie, since they have communicated us of shapeways that there is a part that no longer they can print it, so we ask them that they wait for us that we rise it. Many thanks Quote Link to comment Share on other sites More sharing options...
Objetivotuning Posted September 27, 2011 Share Posted September 27, 2011 Goodfellas I'm back!!!! Thank you very much everyone for the feedback, especially Dave (Witness) for the information provided. Ok, with my friend Christian (Arie Tov) just finished designing the “new detonator greeble board” into two parts, "The Board and the cylinder" The measures were bounded with my MONCAL armor Dimensions: Length 4.5 cm, Width: 2.3 cm, thickness 5 mm. My friend did the design in this place www.shapeways.com after this design, print and send the 3D impression of what design to the requested destination. “You only have to pay for 3D printing, which makes the company and shipping” I want to clarify that THIS IS NOT A RUN, this is a gift than made to me my friend and I do the same thing to BSN and all its members. Any member can register at this site and ready. You can select the type of material to 3D print, I have used for the board and the cylinder " Black Detail " I've been very lucky with this place (BSN) and I am very grateful. I leave the link http://www.shapeways...out.html?gid=ug http://www.shapeways...os_.html?gid=ug Clarification Note: I have not yet received mine, it is very probable that we have to make corrections to the various measures. Good luck to all !!!!!!!!!!, Abrazo grande Leo Now we're talkin' my friend! You improve it in the right way! Cant wait to see the finished piece Quote Link to comment Share on other sites More sharing options...
Boba Leo Posted September 28, 2011 Author Share Posted September 28, 2011 Now we're talkin' my friend! You improve it in the right way! Cant wait to see the finished piece Thanks Juan!!!!!!! Quote Link to comment Share on other sites More sharing options...
Boba Leo Posted September 28, 2011 Author Share Posted September 28, 2011 Thank you very much everyone for your words of encouragement. As my friend Christian said, we're making some small modifications I would ask everyone, please patience as we make this, the most accurate as possible, unfortunately we do not have the original part Leo Quote Link to comment Share on other sites More sharing options...
Guest Arie Tov Posted September 28, 2011 Share Posted September 28, 2011 As Leo said, I reset the greeblie. I'm putting together based on the picture I bring to Dave (Witness) and i got the rank bar of Endor Commando (assuming they have similar creation). This is done so far, I hope their views. Quote Link to comment Share on other sites More sharing options...
Boba Leo Posted September 28, 2011 Author Share Posted September 28, 2011 Much better bro!!!!!! Leo Quote Link to comment Share on other sites More sharing options...
Objetivotuning Posted September 28, 2011 Share Posted September 28, 2011 As Leo said, I reset the greeblie. I'm putting together based on the picture I bring to Dave (Witness) and i got the rank bar of Endor Commando (assuming they have similar creation). This is done so far, I hope their views. Ariel ! is nice to see you here ! now looks closer to the pictured one, maybe the inner parts could be more raised, not that flat. Just my point of view See you around ! Quote Link to comment Share on other sites More sharing options...
yodaawilson Posted October 6, 2011 Share Posted October 6, 2011 http://www.shapeways...out.html?gid=ug Invalid model id: 338399 the first link does not work :-( the images look awesome!! Quote Link to comment Share on other sites More sharing options...
Guest Arie Tov Posted October 11, 2011 Share Posted October 11, 2011 http://www.shapeways...out.html?gid=ug Invalid model id: 338399 the first link does not work :-( the images look awesome!! That's right, dropped out this model as we seek to be as similar as possible to that of imagesprovided by the BR. These days I was busy with an event in which we participate with a booth of Star Wars an exhibition collectibles and had the satisfaction of getting the first prize for our presentation:), joy on the sidelines, now continue to develop with Leo this greeblie, thanks for the patience. Quote Link to comment Share on other sites More sharing options...
Ducman82 Posted November 11, 2011 Share Posted November 11, 2011 any updates? Quote Link to comment Share on other sites More sharing options...
Boba Leo Posted November 12, 2011 Author Share Posted November 12, 2011 any updates? Yes Jake, We are working with Arie, with a few modifications, we will keep up with the information. Thanks, Leo Quote Link to comment Share on other sites More sharing options...
recon Posted December 19, 2011 Share Posted December 19, 2011 hi leo, Hook me with a set once they are finished. Would need them for my TD upgrades Quote Link to comment Share on other sites More sharing options...
Boba Leo Posted December 19, 2011 Author Share Posted December 19, 2011 hi leo, Hook me with a set once they are finished. Would need them for my TD upgrades Ok, Remember that if you want to do for yourself is to go to www.shapeways.com You can select the type of material to 3D print, I have used for the board and the cylinder " Black Detail " Anyway, Keep in touch Louis!!!!!!! Leo Quote Link to comment Share on other sites More sharing options...
Shyrax Posted December 19, 2011 Share Posted December 19, 2011 Links aren't working for me. Quote Link to comment Share on other sites More sharing options...
Boba Leo Posted December 20, 2011 Author Share Posted December 20, 2011 Links aren't working for me. Yes Jason you are right !!!!!! Life keeps me busy !!!!!! even so with my friend we are making some corrections to do this as accurately as possible. Leo Quote Link to comment Share on other sites More sharing options...
loosetoon Posted December 21, 2011 Share Posted December 21, 2011 If you know the links don't work, why are you directing people to them? Quote Link to comment Share on other sites More sharing options...
Boba Leo Posted December 21, 2011 Author Share Posted December 21, 2011 If you know the links don't work, why are you directing people to them? Because I made a mistake, Steve !!!!! I wanted to recall that it was not a run and I copied the wrong link !!!!!!! I´m Sorry!!!!!!! Fixed, deleted bad link Leo Quote Link to comment Share on other sites More sharing options...
loosetoon Posted December 22, 2011 Share Posted December 22, 2011 These? http://www.shapeways.com/model/225120/placa_de_rango_de_soldado_de_endor_.html?gid=sg73175 http://www.shapeways.com/model/225080/placa_de_rango_de_soldado_de_endor__complementos_.html?gid=sg73175 Quote Link to comment Share on other sites More sharing options...
Boba Leo Posted December 22, 2011 Author Share Posted December 22, 2011 These? http://www.shapeways...tml?gid=sg73175 http://www.shapeways...tml?gid=sg73175 Stev the first link, is the first prototype than made ​​by my friend!! does not have the correct measurements (Soldier's board of Endor) and the second link itself is fine, is the cylinder that goes with the board. You just take the second, with my friend we are redesigning the first link (the whole board) Due to the holidays and even real life we can not join with my friend to complete this project. Look forward to meeting with my friend in mid-January to end this project, we'll keep you posted Thank you very much for your patience!!! Thanks a lot, Leo Quote Link to comment Share on other sites More sharing options...
Boba Leo Posted February 5, 2012 Author Share Posted February 5, 2012 Well guys, With my friend Christian have finished the last details. Tell me, what do you think?, Before the end of this I would like to know your comments, all are welcome. Pics Leo Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.