plagu3is Posted June 17, 2011 Posted June 17, 2011 Helmet: KS (With MC snout, covers found at Lowes) Armor: SC Soft Parts: Custom made by my friend Brema (With suede thigh patch and riding flap, leg straps.) Boots: Witness Gloves: sitharmor Blaster: KS Balaclava: UA
plagu3is Posted June 17, 2011 Author Posted June 17, 2011 More detailed pictures cause my buddy Chex said he couldn't see my ribs (hehe ribs) on my cummerbund "DOH" there's 6 trust me ;] and that in my photos my chest plate seem a bit high, apparently it came loose a bit, let me know and I'll take another set of photos cause I was pretty tired after wearing the armor for a few hours for a photo shoot as I'm slouching and exhausted from 98F heat
4505Marcel Posted June 18, 2011 Posted June 18, 2011 Thanks for your application. For me the ribs on the bund could be closer togther, then you could bring in your pouches a touch, the pouches also look a little under sized on your frame, lets see what the others have to say.
plagu3is Posted June 18, 2011 Author Posted June 18, 2011 Thanks for your application. For me the ribs on the bund could be closer togther, then you could bring in your pouches a touch, the pouches also look a little under sized on your frame, lets see what the others have to say. Well the pouches are to specifications just I am aware of my chest piece coming out of place and sliding back a bit if you saw my pockets you'd see they look positioned properly I'd hope
4505Marcel Posted June 18, 2011 Posted June 18, 2011 What size are your pouches and how tall are you mate?
plagu3is Posted June 18, 2011 Author Posted June 18, 2011 What size are your pouches and how tall are you mate? I'm 5'10" the sizes came from SC site
bluecyclone Posted June 20, 2011 Posted June 20, 2011 The three square greeblies need to be replaced with more accurate ones.
plagu3is Posted June 20, 2011 Author Posted June 20, 2011 The three square greeblies need to be replaced with more accurate ones. I was told that it just needed to be present :[ what all can be used for the greeblies?
bluecyclone Posted June 20, 2011 Posted June 20, 2011 I was told that it just needed to be present :[ what all can be used for the greeblies? Everything needs to be present, but also accurate. Contact MonCal or Mr. Bojangles for accurate greeblies.
plagu3is Posted June 20, 2011 Author Posted June 20, 2011 Everything needs to be present, but also accurate. Contact MonCal or Mr. Bojangles for accurate greeblies. Alright :] I'm getting right on it
bluecyclone Posted June 20, 2011 Posted June 20, 2011 You can try SC also, I think Jeff updated his greeblies.
plagu3is Posted June 20, 2011 Author Posted June 20, 2011 You can try SC also, I think Jeff updated his greeblies. Thanks for the tip jeff is a good guy I'll email him right away
plagu3is Posted July 5, 2011 Author Posted July 5, 2011 my new greeblies! :] I'll be hitting refresh for the next few days every 20mins
4505Marcel Posted July 14, 2011 Posted July 14, 2011 Were all agreed you need to alter the way the pouches are sitting, there is just too much gap above the pouches betwen the chest plate and pouch. Ideally they want to sit under the chest plate and just touch the top of your belt. And they are too wide apart, if you re stitch the ribs closer to each other you can then bring together the pouches and still see the 7 stitch lines between them. I sew my stitches 20mm apart if that helps. You could try pulling down your chest plate a touch as it does sit quite abit higher than your back plate, that should close the gap on the pouches? I know you said you have built the pouches to spec, but there is no spec on these as each troopers height will or should adjust the size the pouches need to be to keep the scale/look right. For instance mine are 6x7" and im 5'10" and my misses pouches are 5x6" as she is 5'8".
plagu3is Posted July 14, 2011 Author Posted July 14, 2011 Were all agreed you need to alter the way the pouches are sitting, there is just too much gap above the pouches betwen the chest plate and pouch. Ideally they want to sit under the chest plate and just touch the top of your belt. And they are too wide apart, if you re stitch the ribs closer to each other you can then bring together the pouches and still see the 7 stitch lines between them. I sew my stitches 20mm apart if that helps. You could try pulling down your chest plate a touch as it does sit quite abit higher than your back plate, that should close the gap on the pouches? I know you said you have built the pouches to spec, but there is no spec on these as each troopers height will or should adjust the size the pouches need to be to keep the scale/look right. For instance mine are 6x7" and im 5'10" and my misses pouches are 5x6" as she is 5'8". I will get on that may take awhile but it'll be done
plagu3is Posted July 16, 2011 Author Posted July 16, 2011 Your nearly there mate hopefully in the next 2 weeks my new cummberbund from ladysew4us will be in and I'll put new pictures up
plagu3is Posted July 29, 2011 Author Posted July 29, 2011 it's really late on the east coast and made my friend shaun take pictures of me in my new cummerbund and pouches by Ladysewforus
4505Marcel Posted July 29, 2011 Posted July 29, 2011 Can you post a close up picture of the bund ribbing, im confident there correct, just need to see it same as we would for any app please.
plagu3is Posted July 29, 2011 Author Posted July 29, 2011 Can you post a close up picture of the bund ribbing, im confident there correct, just need to see it same as we would for any app please. sry my bad the suspense is like omg omg!
plagu3is Posted July 29, 2011 Author Posted July 29, 2011 OMG OMG! Lol you're silly witness, and it's especially funny cause I noticed your new avatar :3
Recommended Posts