Agent RayBans Posted September 14, 2010 Share Posted September 14, 2010 Hello all, newb question alert I'm sure as some of you have seen Atin is doing some runs of TB armor for a very modest price over on the 501st forums, which caught my eye. I've done some searches around the forum and a few of you in the past advised staying away from Atin/CNC for misc reasons and to pursue other suits. I was wondering if that opinion still holds today? I realize that its inaccurate compared to other suits, and Atin's kit does not include anything but the body armor. But this suit would be for my girl friend who is not really looking for super accuracy, but base 501st acceptability. She is around 5'3" and around 120 pounds, would this suit be too big for her? Thanks in advanced! Quote Link to comment Share on other sites More sharing options...
TK6918 Posted September 14, 2010 Share Posted September 14, 2010 This may not apply to the biker scout armor, but I seen and built a set of atin clone armor, and it was the worse thing to try to put together and make it look accurate. As a clone, parts need to match up and be made seamless, and the quality of his pulls is just horrible. What you pay is what you get. You may end up spending more money in the long run by either fixing, replacing parts, or spending way too much time getting it done. Quote Link to comment Share on other sites More sharing options...
Witness Posted September 14, 2010 Share Posted September 14, 2010 I agree with Manny exactly. A good set of armor costs more. The SC armor is not expensive and is good quality. MC is excellent quality and a little more cost. You're not likely to find someone to suggest getting cheaper armor. Contact bluecyclone for an info file on contacts and suggestions. Quote Link to comment Share on other sites More sharing options...
Cyber Scout Posted September 14, 2010 Share Posted September 14, 2010 Well it's personal pride in your suite, to many people always say well its just to pass 501st standards which for the Scout are way to low, to many people build scout with cheap armour and not all the parts on the costume i.e butt flap and stuff, this thing should be in the G.M.L, (you don't see Boba Fett without his boots or rocket pack) to have a costume to be proud of you WILL have to spend. Quote Link to comment Share on other sites More sharing options...
Agent RayBans Posted September 14, 2010 Author Share Posted September 14, 2010 Thanks for the advice guys, we'll steer clear from Atin and go with something of better quality. I know I would like to see my girlfriend in a Lancer quality suit (I have an "Elite Status" TK over on whitearmor), but money is the main object right now. The decision to go for base requirements is/was purely from a financial stand point, sadly. Anyway, thanks for your responses guys, crisis averted! I'll have to make sure her and I do some more research before we start collecting pieces. Quote Link to comment Share on other sites More sharing options...
GosHawk Posted September 14, 2010 Share Posted September 14, 2010 I usually don't post much. You don't need to go lancer right away. I'm working on my scout now (SC) and I bought a cheap jumpsuit to save money. It's not lancer approved but it troopable. Besides kids don't really notice the difference. It's just fun to go that extra mile and make something near 100% accruate over time. Guess what I'm trying to say is you will always be making improvements over time. I'm still making improvements to my TD and I'm deployed. Quote Link to comment Share on other sites More sharing options...
Chex Posted September 14, 2010 Share Posted September 14, 2010 Well it's personal pride in your suite, to many people always say well its just to pass 501st standards which for the Scout are way to low, to many people build scout with cheap armour and not all the parts on the costume i.e butt flap and stuff, this thing should be in the G.M.L, (you don't see Boba Fett without his boots or rocket pack) to have a costume to be proud of you WILL have to spend. Agreed. I've ordered SC for my armor. Def do your homework, and don't by cheap for the sake of buying cheap. Unless you get a really good deal on something. There's a reason you see SC and MC posting here, and not Atin. Quote Link to comment Share on other sites More sharing options...
TK6918 Posted September 14, 2010 Share Posted September 14, 2010 I think the good thing is you at least did some research and ask before sending money away. I see a lot of people on the main 501st boards rushing to send Atin payments because hell pop in every now and then and do limited runs, then usually a while after you'll see those same people selling the armor kit because they'll change their mind once they see the kit in person. 1 Quote Link to comment Share on other sites More sharing options...
virateck Posted September 23, 2010 Share Posted September 23, 2010 Hello all, newb question alert I'm sure as some of you have seen Atin is doing some runs of TB armor for a very modest price over on the 501st forums, which caught my eye. I've done some searches around the forum and a few of you in the past advised staying away from Atin/CNC for misc reasons and to pursue other suits. I was wondering if that opinion still holds today? I realize that its inaccurate compared to other suits, and Atin's kit does not include anything but the body armor. But this suit would be for my girl friend who is not really looking for super accuracy, but base 501st acceptability. She is around 5'3" and around 120 pounds, would this suit be too big for her? Thanks in advanced! atin's armor is pretty well done! look, this is my armor Quote Link to comment Share on other sites More sharing options...
bluecyclone Posted September 23, 2010 Share Posted September 23, 2010 atin's armor is pretty well done! look, this is my armor Sorry dude, but no. His armor is very inaccurate. Nothing personal towards you, or him for that matter. If it's bad, it's bad. There's no point in sugercoating it. Quote Link to comment Share on other sites More sharing options...
virateck Posted September 25, 2010 Share Posted September 25, 2010 yes, I know she is not perfect, but when you have a small budget (I was only 14 when I made this costume ^ ^) is a good base Quote Link to comment Share on other sites More sharing options...
cricket71 Posted September 26, 2010 Share Posted September 26, 2010 I had bought a set of his black armor a while back and soon found there were several discripancies with the armor that would have to be replaced before it would even get "base" 501st acceptance. As for your girl friend she would probably not be able to wear it as I could not wear it. It was way to big for me. I'm about 5'11, 145lbs. Trimming it was out of the question as it would lose what detail it had. I would save your money and get SC or one of the others that the Scouts mentioned Hello all, newb question alert I'm sure as some of you have seen Atin is doing some runs of TB armor for a very modest price over on the 501st forums, which caught my eye. I've done some searches around the forum and a few of you in the past advised staying away from Atin/CNC for misc reasons and to pursue other suits. I was wondering if that opinion still holds today? I realize that its inaccurate compared to other suits, and Atin's kit does not include anything but the body armor. But this suit would be for my girl friend who is not really looking for super accuracy, but base 501st acceptability. She is around 5'3" and around 120 pounds, would this suit be too big for her? Thanks in advanced! Quote Link to comment Share on other sites More sharing options...
BrotherHalo Posted September 29, 2010 Share Posted September 29, 2010 Other than what's pointed out above, that armor IS 501st acceptable. Not preferred, but it won't keep your GF from being accepted. Quote Link to comment Share on other sites More sharing options...
Smitty Posted September 29, 2010 Share Posted September 29, 2010 I had a set of this last year, I'm 5'10" 155 pounds and it was too big for me. I started trying to mod it to fit my frame and once I got frustraded with it I kicked it to the ebay. Basically what everyone else has stated. Quote Link to comment Share on other sites More sharing options...
Darth Voorhees Posted December 24, 2010 Share Posted December 24, 2010 I got this armor for my finace. Cost was a main reason. Plus shes a little..how do we say...top heavy, so the Atin actualy fits her better than my MC armor. There is NO WAY she would fit her ta tas in the MC. lol. Is it accurate, not quite, but its not that bad. I think the scout he does is decent, it depends on your body type and needs. I also feel the pulls are good and the thickness of the armor is good. His clone armor i bought, and sold not long after. Wasnt happy with it at all. That being said, if you can aford the SC or MC armor, and your not a top heavy chick, id go with one of those over the Atin. Quote Link to comment Share on other sites More sharing options...
Tribune Posted February 3, 2014 Share Posted February 3, 2014 I was so afraid I got the wrong armor because I did no research. Luckily my ladyfreind is packing to so reading this put my mind at ease. Thanx voorhees Quote Link to comment Share on other sites More sharing options...
bjsavage7 Posted February 4, 2014 Share Posted February 4, 2014 The Atin armor might be alright for some, but keep in mind, this thread is older & there are details on it that are currently unapprovable, mainly the inaccurate thermal detonator. Quote Link to comment Share on other sites More sharing options...
Tribune Posted February 4, 2014 Share Posted February 4, 2014 Ok thanx for the heads up. Other then that everything is ok?. Quote Link to comment Share on other sites More sharing options...
bjsavage7 Posted February 4, 2014 Share Posted February 4, 2014 I think that is the only part that would need replacing all together. The rest should be acceptable with minimal modification. Quote Link to comment Share on other sites More sharing options...
Tribune Posted February 5, 2014 Share Posted February 5, 2014 Word Quote Link to comment Share on other sites More sharing options...
chimei Posted February 17, 2014 Share Posted February 17, 2014 is anyone still approving a six piece belt? it's not even close! has atin created a new belt? SC three-piece can easily be made to look like one...but those small pieces are just...well, they just aren't Quote Link to comment Share on other sites More sharing options...
Tribune Posted February 21, 2014 Share Posted February 21, 2014 wait, huh? Quote Link to comment Share on other sites More sharing options...
bjsavage7 Posted February 21, 2014 Share Posted February 21, 2014 I thought their belts were one piece, but if they are in three pieces, that's definitely one more thing wrong with them. Quote Link to comment Share on other sites More sharing options...
Tribune Posted February 21, 2014 Share Posted February 21, 2014 man i gots to make it work, any suggestions?. Quote Link to comment Share on other sites More sharing options...
bjsavage7 Posted February 21, 2014 Share Posted February 21, 2014 Maybe get a plastic for-sale sign & glue all the pieces to it & bondo the edges, so it looks like its one long piece. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.