radar Posted March 8, 2009 Share Posted March 8, 2009 Hi TB2270 requesting Lancer deployment, Comments more than welcome Steve Link to comment Share on other sites More sharing options...
bluecyclone Posted March 9, 2009 Share Posted March 9, 2009 Thanks, we will review and get back to you! Link to comment Share on other sites More sharing options...
bluecyclone Posted March 11, 2009 Share Posted March 11, 2009 The first issue we need you to address is your boots, the holster is inaccurate, and the flap that goes across the front is too wide. Next is your helmet, the black pinstripping is incorrect, they all need to be the same length, and we need more detailed photos of the helmet. Address these issues and we will go from there. Link to comment Share on other sites More sharing options...
BrotherHalo Posted March 11, 2009 Share Posted March 11, 2009 The first issue we need you to address is your boots, the holster is inaccurate, and the flap that goes across the front is too wide. Next is your helmet, the black pinstripping is incorrect, they all need to be the same length, and we need more detailed photos of the helmet. Address these issues and we will go from there. To clarify: Boots - appear to be too short (in addition to the top flap being too wide) Holster - no black lines Other than that, what bluecyclone mentioned above needs to be addressed as well. We're looking forward to seeing your changes! Link to comment Share on other sites More sharing options...
TB-1019 Posted March 11, 2009 Share Posted March 11, 2009 And by "flap" we mean that spat of vinyl that arches across the top of the boots. Link to comment Share on other sites More sharing options...
radar Posted October 24, 2009 Author Share Posted October 24, 2009 At last...i have made new boots with a new holster and taken pic of these and i have a new lid an pics but i can't seem to upload them. I'm not good with computers can someone advise please. ANYONE Link to comment Share on other sites More sharing options...
BrotherHalo Posted January 27, 2010 Share Posted January 27, 2010 Hey radar, you still having problems with this? We'd like to review your latest pics. Link to comment Share on other sites More sharing options...
radar Posted January 31, 2010 Author Share Posted January 31, 2010 Hey radar, you still having problems with this? We'd like to review your latest pics. Hey..yep still having grief with getting the pics sorted, it's so annoying i'm sure this time you'll grant me Lancer too....fingers crossed. is there some other way i can send in pics to be looked at, i've wanted to do this for so long now Lancer would be such an honour. Link to comment Share on other sites More sharing options...
BrotherHalo Posted February 1, 2010 Share Posted February 1, 2010 If you have pics, you can email them to me and I'll get them posted up. I'm sending you a PM! Link to comment Share on other sites More sharing options...
radar Posted February 11, 2010 Author Share Posted February 11, 2010 pics sent. Link to comment Share on other sites More sharing options...
BrotherHalo Posted February 11, 2010 Share Posted February 11, 2010 I got your pics, steven! Link to comment Share on other sites More sharing options...
BrotherHalo Posted March 16, 2010 Share Posted March 16, 2010 Radar's newest pics: Helmet Link to comment Share on other sites More sharing options...
BrotherHalo Posted March 16, 2010 Share Posted March 16, 2010 Radar's latest BOOT pics: And with boots on: Link to comment Share on other sites More sharing options...
Witness Posted March 17, 2010 Share Posted March 17, 2010 Hi Steven, I'm just going to touch on a few things here as not to overwhelm you. The changes you for your boots look great. Your helmet is still going to need some work. I'm guessing it is a Rubies? It is a little mishapped, and I will let bluecyclone and Brotherhalo field issues there. The stickers on it need some work too. The grey with black stripe rear vent stickers you are using have black edging around them. The screen used ones do not have a black outline. Your 3 brow vents are rectangular in shape. The screen used one is more rounded and larger. You can also see in this photo that your snout nose vents are incorrectly spaced. Usage of a proper sticker would fix this. Your hook is also incorrect for proportions. The best thing I can suggest for this is you purchase a new sticker set from Moncal/Mr. Bojangles. They can be reached through PM on this forum or on the Legion forums. The next issue is your tank. Your tank has two rivets on the top, one on the greeble and one holding the tank to the backplate. This is a flaw in the Studio Creations armor design. You will need to find a way to connect the tank to the backplate that does not have a rivet on the white portion at the top of your picture here: It should look like this: We'll also need some pictures of your vest, cummerbund, suede riding patch and mudflap. Link to comment Share on other sites More sharing options...
radar Posted March 17, 2010 Author Share Posted March 17, 2010 I can take care of all of the things you have brought up and get you better pics of my vest etc, however the issue i have is the lid, if being a little miss shapen is a problem the i have a problem because it's made of fibre glass and therefore can't do a thing about it. I wont be buying another lid so before i go any further if this is going to be a problem and cost me the title of Lancer then i would like to know now if possible please. Link to comment Share on other sites More sharing options...
Witness Posted March 17, 2010 Share Posted March 17, 2010 My mistake on the lid, it's a MLC isn't it? Just seems a little squat and a touch crooked in the back. We'll get back to you on the helmet shape shortly. Link to comment Share on other sites More sharing options...
radar Posted March 18, 2010 Author Share Posted March 18, 2010 My mistake on the lid, it's a MLC isn't it? Just seems a little squat and a touch crooked in the back. We'll get back to you on the helmet shape shortly. No my lid is a fibre glass cast of a re worked well modded Rubies. It seems that all the Lancers have MLC lids, i wanted one but couldn't afford it, which makes me think that no MLC no Lancer. Link to comment Share on other sites More sharing options...
Witness Posted March 18, 2010 Share Posted March 18, 2010 No my lid is a fibre glass cast of a re worked well modded Rubies. It seems that all the Lancers have MLC lids, i wanted one but couldn't afford it, which makes me think that no MLC no Lancer. I have a KS lid so there goes that theory We are still working on a decision on your helmet. Link to comment Share on other sites More sharing options...
radar Posted March 18, 2010 Author Share Posted March 18, 2010 I have a KS lid so there goes that theory We are still working on a decision on your helmet. I stand corrected sir, appologies I have new helmet stickers on stand by and i'm starting the tank topper adjustment this weekend. Link to comment Share on other sites More sharing options...
bluecyclone Posted March 19, 2010 Share Posted March 19, 2010 Bob, Dave and myself are in agreement, since the helmet can not be modified it needs to be replaced. I wish there were an easier solution, but as with anything in this hobby, there usually isn't. Let us know what you plan on doing. Link to comment Share on other sites More sharing options...
BrotherHalo Posted March 19, 2010 Share Posted March 19, 2010 Honestly, what you probably paid for that fiberglass bucket could easily get you a KS lid in kit form, at the least. You can always try selling your helmet to get the funds for the KS bucket. Link to comment Share on other sites More sharing options...
radar Posted March 19, 2010 Author Share Posted March 19, 2010 On that note i am withdrawing my application for Lancer status, I don't know what is wrong with the lid. it's a little off shape but it's a good one too better than some other lids i have seen. i will take on board the other bits needed to finish off my costume do those and be happy with the fact i have a top notch outfit, i wont be buying another lid. I would like to thank all involved for their help and time. Link to comment Share on other sites More sharing options...
Recommended Posts