Jump to content

Lancer Deployment request TB-3346 ready to be a Lancer. :-)


yodaawilson

Recommended Posts

You quoted me above and put a few sentences in bold, but missed the point:

 

The belt above is acceptable if put together correctly, rivets are fine. Just make sure that there is no webbing between the pieces giving the appearance of three seperate sections, which was the original issue with yours. If riveted correctly (with white rivets) it gives the appearance of one solid piece.
Link to comment
Share on other sites

  • 2 weeks later...
  • Replies 70
  • Created
  • Last Reply

Top Posters In This Topic

You quoted me above and put a few sentences in bold, but missed the point:

 

 

Ok i see what you mean. I will just have to order a new belt and fix it up.

thanks for the clarification

also would this blaster work for lancer status?

 

Oh and BTW this is one of the professional pics done at my garrisons latest con.

n305700013_16424_6751626.jpg

 

You can see the mudflap on the back and the snaps are attached to the vest made by ladyghost. she is so talented. B):D

Link to comment
Share on other sites

That blaster is acceptable. Better pics! ;) What about those silver things under your arm, what are those for?

 

those are snap clips that lady ghost added to my vest to help keep my cumbund up. I just have to sew the other side to it. It was a very smart idea.

Link to comment
Share on other sites

  • 2 weeks later...

new pics of my helmet. I followed the step by step on the forum. thanks for making it. ;)

metal frame inside

3249_502488978958_305700013_16681_7737265_n.jpg

 

showing tight uniform fit on sides

3249_502488983948_305700013_16682_3263550_n.jpg

3249_502488988938_305700013_16683_165062_n.jpg

 

tight and uniform front ;)

3249_502488993928_305700013_16684_6290579_n.jpg

 

Yellow glue all gone :-)

3249_502489003908_305700013_16686_3681901_n.jpg

 

New blaster approved lancer one :-D

3249_502489008898_305700013_16687_6633242_n.jpg

3249_502489013888_305700013_16688_2888938_n.jpg

 

Boots redone, stiched, accurate detail on heel from movie research, etc

3249_502489018878_305700013_16689_1111162_n.jpg

 

These are pictures of models I followed for the heel and boot.

motm_bootholster01w.jpg

3249_502489048818_305700013_16691_5551354_n.jpg

3249_502489053808_305700013_16692_5383325_n.jpg

 

mud flaps all done by lady ghost

3249_502488968978_305700013_16679_3215950_n.jpg

3249_502488968978_305700013_16679_3215950_n.jpg

Link to comment
Share on other sites

Hi all. I bought a new belt with boxes from studiocreations and I just finished putting it all together. Thanks for the pics and references. I really want to thank Ken Jordan for letting me use his belt as a reference. Seeing it up close helped me make mine look more screen accurate.

Here are the pics:

3249_502493205488_305700013_16851_3286222_n.jpg

3249_502493210478_305700013_16852_6905234_n.jpg

3249_502493225448_305700013_16855_6284616_n.jpg

3249_502493235428_305700013_16857_2496303_n.jpg

3249_502493215468_305700013_16853_191596_n.jpg

3249_502493220458_305700013_16854_7477389_n.jpg

 

I believe this is the last on the list of things I was asked to correct. boots, check, helmet mod, check, mud flaps, check, and now the belt is finished YEAH!!! :):):):):)

If you need further pics just ask :-) I hope you enjoyed the pro pics. That guy was great.

 

 

 

Do I qualify for lancer status now? 8-) excited-boy-cheering_~itf304064.jpg

Link to comment
Share on other sites

humm not sure. How do you do that?

 

AH ok after reading what High -res means. I am pretty sure since this guy was a professional with a seriously nice and expensive digital camera and setup, lights and etc these are as high-res as he could make them. If you know how to increase the res I am open to advise as to how I do that.

Link to comment
Share on other sites

humm not sure. How do you do that?

 

AH ok after reading what High -res means. I am pretty sure since this guy was a professional with a seriously nice and expensive digital camera and setup, lights and etc these are as high-res as he could make them. If you know how to increase the res I am open to advise as to how I do that.

 

 

Actually, the images you posted here are lo-res. We'd like to see something "bigger" in pixel dimension, bigger than the 200x300 photos you posted. Something in the range of 400 wide. That way, we can see the details better.

 

 

As a side-note, it appears that the flight suit around your legs looks a bit loose - any way you can get those to fit better?

 

 

 

Also, can you please provide a few up close shots of the same side of your bucket as in the above shot? It looks like there's some glue on that side of the bucket that could use some cleaning up, too.

Link to comment
Share on other sites

Actually, the images you posted here are lo-res. We'd like to see something "bigger" in pixel dimension, bigger than the 200x300 photos you posted. Something in the range of 400 wide. That way, we can see the details better.

 

I will try, but if you would please let me know which details you need to see I will take pics up close for you which might be easier. :unsure:

 

ok got it :-D However, please note that both the boots, knee armor, and the belt in these have been corrected. tks

3249_502494033828_305700013_16907_5011259_n.jpg

3249_502494038818_305700013_16908_1413802_n.jpg

3249_502494058778_305700013_16910_7793747_n.jpg

3249_502494093708_305700013_16915_5966898_n.jpg

3249_502494073748_305700013_16912_12908_n.jpg

 

As a side-note, it appears that the flight suit around your legs looks a bit loose - any way you can get those to fit better?

 

I think its the white background (hard to see knee armor from back), the theigh straps and the extra material of my mud flap on one side that gives this look. It is a tight flight suit since I have fair sized theighs from swimming a long time. I able to tuck in some at the boots, but that's mainly it. :)

 

Also, can you please provide a few up close shots of the same side of your bucket as in the above shot? It looks like there's some glue on that side of the bucket that could use some cleaning up, too.

 

sure. the other red strip is a rubber band that I have removed and I cleaned up the glue before the professional pics were taken. the helmet is as tight as i can make it to make it on the sides. B) I have to force it on my head now. :wacko:

3249_502494028838_305700013_16906_2129394_n.jpg

 

Anymore questions or detail pics needed? B)

Link to comment
Share on other sites

  • 1 month later...

Hello All. I just wanted to post one of my latest pics from an event I did. You can see some of the details I have updated even if it is a group shot :D

Enjoy B)

4210_502496653578_305700013_16959_3739243_n.jpg

Link to comment
Share on other sites

  • 2 weeks later...

Not to be a pain in the ass, but can you please post some close-up, more clear shots of all sides of your helmet, please?

 

Belt looks good.

 

I'd like another look at the holster and a separate shot of your blaster.

 

Thanks, Alex!

Link to comment
Share on other sites

sure do you want newer ones rather than these previous pics? It is the new one verse my old resin one :-)

 

New blaster approved lancer one :-D

3249_502489008898_305700013_16687_6633242_n.jpg

3249_502489013888_305700013_16688_2888938_n.jpg

Link to comment
Share on other sites

Oh I forgot to say that the caulking has been removed with my pocket knife and sandpaper. clean and all white now :-) new pics to follow

Link to comment
Share on other sites

Caulking? Around the lens, you mean?

 

Also, please clean up around the fishhook on the helmet. It looks awfully "goopy" around it. In fact, the entire left side of the helmet looks dirty, but not an intentional weathering scheme. Please provide a bit more details, Alex.

 

Thanks!

Link to comment
Share on other sites

no the lens is ok, but I cleaned up all the caulking all over anyway. It was the caluking around the fishhook and on the side. ;-)

updated pics of it cleaned up :-D

5809_502530820108_305700013_18535_6304744_n.jpg

5809_502530845058_305700013_18537_5171484_n.jpg

 

Link to comment
Share on other sites

thanks for posting those, Alex...

 

we hate to make it seem like we're really nitpicking your costume, but we're just not 100% satisfied yet.

 

 

The fishhook appears to be still rather gunky with caulking or whatever is around it. This area needs to be cleaned up.

 

Please provide new shots of your boots with the new holster.

 

Also, if you could provide larger shots of you in full costume from the front, side and back, just as if you were submitting for Legion approval, that would help. The bigger the picture, the better for us to look at details.

 

thanks for all your work and patience with this process, Alex!

Link to comment
Share on other sites

  • 2 weeks later...
thanks for posting those, Alex...

 

we hate to make it seem like we're really nitpicking your costume, but we're just not 100% satisfied yet.

 

 

The fishhook appears to be still rather gunky with caulking or whatever is around it. This area needs to be cleaned up.

 

Please provide new shots of your boots with the new holster.

 

Also, if you could provide larger shots of you in full costume from the front, side and back, just as if you were submitting for Legion approval, that would help. The bigger the picture, the better for us to look at details.

 

thanks for all your work and patience with this process, Alex!

 

 

Sorry but if it seems that your nitpicking imagine it on my end. LOL. what is it that your not 100% sure about what so I can correct those things directly, because it seems at times that I am back tracking. Not to sound hot or upset because I am not I like getting things right, but I just like particulars so I can work on those. I am not too good at hitting a moving target. :-/

 

The fish hook has been cleaned up and redone.

6329_502543474748_305700013_19704_1467058_n.jpgB)

 

Here are the pics of my boots, but I have not added a nw holster since the one I have had was fine. I don't know where that thought that I had a new one came from. :-?

 

6329_502543479738_305700013_19705_8126596_n.jpg

this is a complete restich. one straight hand stiched line all around the top and 2 lines down the back since every machine I have tried has not worked. It took 2 days to get it right to me for each boot. (ie this was not a qucikie job) :mellow:

6329_502543484728_305700013_19706_156350_n.jpg

6329_502543489718_305700013_19707_7382764_n.jpg

 

thanks for helping me make it more like the movie. I will post one big pic of me in it later. Any other corrections I need to make?

Link to comment
Share on other sites

  • 1 month later...
thanks for posting those, Alex...

 

Also, if you could provide larger shots of you in full costume from the front, side and back, just as if you were submitting for Legion approval, that would help. The bigger the picture, the better for us to look at details.

 

thanks for all your work and patience with this process, Alex!

 

 

new pics of finished armor and boots with all the corrections in an endor action setting :D

 

9216_502584462608_305700013_21944_1442095_n.jpg

 

9216_502584467598_305700013_21945_6072918_n.jpg

 

 

a few fun pics of working with the kids at an event yesterday and riding dinasour B)

 

9216_502584487558_305700013_21949_4216659_n.jpg

 

9216_502584497538_305700013_21951_3055934_n.jpg

Link to comment
Share on other sites

  • 1 month later...

Hey Alex,

 

Don't think we forgot about you...

 

 

Since the Lancer costume is supposed to look like the cream of the crop, we want to make sure you fit right up there. My recommendations at this point:

 

1. Fishhook. Completely remove the old fishhook you have on your bucket right now. The lines are just not clean enough. There are a few members here who sell decals that would make this so easy for you.

 

2. Blaster. I'm not sure, but it appears to me that the hilt on your blaster is too long. It looks like you can fit all 4 fingers through the guard. At best, you should only be able to fit 3 fingers in.

 

3. Pouches. Can I see a full-on front shot of you in costume? All other front shots seem to be either sideways or 3/4 turn so I can't see proper placement of your soft gear.

 

 

 

Thanks!

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.

×
×
  • Create New...