Jump to content

Recommended Posts

Posted

THIS CRL IS SUBJECT TO CHANGE!  We have started with the Kashyyyk Officer as a basis, items below will be changed to match the Heavy has we go along the process.

Description: Kashyyyk Heavy — Battlefront 2
Prefix: CB
Detachment: PathFinders
Context: Battlefront 2
Clone scout trooper Officers served in the Grand Army of the Republic and were deployed into situations that required swift-moving combat. 

 

 

Required Costume Components

The following costume components are present and appear as described below.

 

 

 
 
 
154px-CB_Officer-Helmet.png Helmet
  • Camo pattern to simulate on-screen troopers.
    • Tan base coat.
    • Camo patterns are colored dark green and flat brown.
  • Most of the helmet, the following items, are painted dark green:
    • The entire visor;
    • The back half of the helmet;
    • The dome other than one thick camo stripe along the center;
    • The cheek plates.
  • May be lightly weathered.
  • Full set of black greeblies: 2 breathers, five bar snout piece, and visor bolts.
  • Visor has a reflective green lens.
  • A rectangular slot is centered in the middle of the visor.
  • Inside of visor is painted the same base color as the armor.
  • Helmet decal matches the screen-used.
  • Rear trapezoids and 9 black stripes on back lower left may either be painted or decals.

 

OPTIONAL Level two certification (if applicable):
  • Recommended camo colors:
    • Krylon Khaki Tan base coat.
    • Panzer Oliver Green.
    • Flat Earth Brown.
  • Black/grey/white misting.
  • Optional: paint scrapes may be represented with silver or chrome paint, not to exceed what is seen on screen.
  • Visor rectangular slot measures 2.25 inches long and 0.5 inches wide.

 

 

 

 

 
 
 
99px-Generic_Balaclava.jpg Balaclava
  • A balaclava is a black head sock/hood that is worn under the helmet and is used primarily to hide any view of the wearer’s skin and/or facial hair.

 


 

 
 
 
102px-CB_Officer-Undersuit.png Under Suit
  • Jacket and pants or jumpsuit.
  • Dark Camouflage pattern should resemble look of screen troopers.
    • No multi-cam or digital camo.
  • No visible pockets when the armor is worn.
  • Large leg pouches have a biased cut flap on the outside, placed in the correct position.
  • Gray, tan, or oatmeal riding patch on inner thigh.

 

OPTIONAL Level two certification (if applicable):
  • British Desert DPM camo dyed brown and black to make them darker.
  • Riding patches are made of leather or suede.
  • Leg pouches must be constructed and measure 6 inches high by 4 inches wide by 1.5 inches deep.

 

 

 

 
 
 
198px-CB_Officer-Shoulders.png Shoulder Armor
  • Camo pattern to simulate on-screen troopers.
    • Tan base coat
    • Camo patterns colored dark green and flat brown
  • Thick dark green stripe down the middle of shoulder bell.
  • May be lightly weathered.

 

OPTIONAL Level two certification (if applicable):
  • Recommended camo colors:
    • Krylon Khaki Tan base coat
    • Panzer Oliver Green
    • Flat Earth Brown
  • Black/grey/white misting.
  • Optional: paint scrapes may be represented with silver or chrome paint, not to exceed what is seen on screen.

 

 

 

 
 
 
195px-CB_Officer-biceps.png Upper Arm Armor
  • Camo pattern to simulate on-screen troopers.
    • Tan base coat.
    • Camo patterns colored dark green and flat brown.
  • Outer portion is painted dark green.
  • May be lightly weathered.
  • Left bicep armor has a gray strap and gray greeblie.
  • Right bicep armor has a gray greeblie.

 

OPTIONAL Level two certification (if applicable):
  • Recommended camo colors:
    • Krylon Khaki Tan base coat.
    • Panzer Oliver Green.
    • Flat Earth Brown.
  • Black/grey/white misting.
  • Optional: paint scrapes may be represented with silver or chrome paint, not to exceed what is seen on screen.
  • Bicep armor greeblies are screen accurate.

 

 

 

 
 
 
200px-CB_Officer-Elbows.png Elbow / Forearm Armor
  • Camo pattern to simulate on-screen troopers.
    • Tan base coat.
    • Camo patterns colored dark green and flat brown.
  • May be lightly weathered.
  • 2 grey straps for each forearm piece.

 

OPTIONAL Level two certification (if applicable):
  • Recommended camo colors:
    • Krylon Khaki Tan base coat
    • Panzer Oliver Green
    • Flat Earth Brown
  • Black/grey/white misting.
  • Optional: paint scrapes may be represented with silver or chrome paint, not to exceed what is seen on screen.

 

 

 

 
 
 
141px-CB_Officer-Gloves.png Gloves
  • Gauntlet-style gloves.
    • black leather from the fingers to the wrists.
    • gauntlet section is brown.
    • back of hand has 2 light gray patches.
  • 2 rubber greeblies (gray or taupe) on gauntlets.
  • Gray strap circles the wrist.
  • No labels/logos, clips or external straps

 

OPTIONAL Level two certification (if applicable):
  • Glove greeblie is screen accurate.
  • Wrist strap has small buckle detail.

 

 

 

 
 
 
174px-CB_Officer-Chest.png Chest Armor
  • Camo pattern to simulate on-screen troopers.
    • Tan base coat.
    • Camo patterns colored dark green and flat brown.
  • Trimmed in dark green along the middle indent and bottom edge.
  • May be lightly weathered.
  • 2 grey colored straps connect the chest and back plates.

 

OPTIONAL Level two certification (if applicable):
  • Recommended camo colors:
    • Krylon Khaki Tan base coat.
    • Panzer Oliver Green.
    • Flat Earth Brown.
  • Black/grey/white misting.
  • Optional: paint scrapes may be represented with silver or chrome paint, not to exceed what is seen on screen.
  • Armor joins flush on the sides.

 

 

 

 
 
 
145px-CB_Officer-Back.png Back Armor
  • Camo pattern to simulate on-screen troopers.
    • Tan base coat.
    • Camo patterns colored dark green and flat brown.
  • May be lightly weathered.
  • Back plate has a tank attached.
  • Top of the tank is flat with a detail piece painted white:
    • Detail piece has a black “dial” with a white handle.
    • There is a red button in the upper right portion.
    • There is a green button in the lower left portion.
    • The other buttons on the detail piece are black.

 

OPTIONAL Level two certification (if applicable):
  • Recommended camo colors:
    • Krylon Khaki Tan base coat.
    • Panzer Oliver Green.
    • Flat Earth Brown.
  • Black/grey/white misting.
  • Optional: paint scrapes may be represented with silver or chrome paint, not to exceed what is seen on screen.

 

 

 

 
 
 
200px-CB_Officer-Cummerbund.png Cummerbund
  • Dark gray base with dark gray vertical straps.
  • Closure in the back, covered by tank and rear pouches.
  • A midsection belt goes around cummerbund.
    • Belt has 2 silver buckles on the front.
  • 16 pouches of various sizes and shapes attach to the cummerbund.
  • Molle vests or variants are not acceptable.

 

OPTIONAL Level two certification (if applicable):
  • Base and vertical straps are the same color gray.
  • Midsection belt is 2 inches tall and goes around entire cummerbund.

 

 

 

 
 
 
200px-CB_Officer-Pouches.png Pouches
  • 16 pouches resembling size of screen-used items.
    • Pouches have different closing flap configurations.
  • Pouches are same color as cummerbund.
    • 2 long front pouches.
    • 2 small rectangular front pouches.
    • 8 small side pouches.
    • 2 long back pouches.
    • 2 large rectangular back pouches

 

OPTIONAL Level two certification (if applicable):
  • Cummerbund pouch sizes as follows:
    • 2 Long front pouches: 7 inches high x 4 inches wide x 1.5 inches deep
    • 2 small front pouches: 2.5 inches high x 4 inches wide x 1.5 inches deep
    • 8 small side pouches
      • Top 4 small side pouches are 3 inches tall x 4 inches wide x 1.5 inches deep
      • Bottom 4 small pouches are 4.5 inches tall x 4 inches wide x 1.5 inches deep
    • 2 Long back pouches: 7 inches high x 4 inches wide x 1.5 inches deep
    • 2 rectangular back pouches: 4 inches high x 7 inches wide x 1.5 inches deep

 

 

 

 
 
 
200px-CB_Officer-Belt.png Belt
  • Grey with black insets.
  • 2 trapezoid drop boxes hang from belt and belt buckle by 4 tan straps.
    • Color matches the cummerbund and pouches.

 

OPTIONAL Level two certification (if applicable):
  • Buckle is gunmetal gray.
  • Dropbox straps are ½ inch wide.

 

 

 

 
 
 
149px-CB_Officer-Codpiece.png Codpiece
  • Triangular in shape.
  • Painted in camo pattern to match armor.
  • May be lightly weathered.
  • Attaches to backside of belt buckle.

 


 

 
 
 
197px-CB_Officer-Knees.png Knee Armor
  • Camo pattern to simulate on-screen troopers.
    • Tan base coat.
    • Camo patterns colored dark green and flat brown.
  • May be lightly weathered.
  • Grey straps for each piece of knee armor.

 

OPTIONAL Level two certification (if applicable):
  • Recommended camo colors:
    • Krylon Khaki Tan base coat.
    • Panzer Oliver Green.
    • Flat Earth Brown.
  • Black/grey/white misting.
  • Optional: paint scrapes may be represented with silver or chrome paint, not to exceed what is seen on screen.

 

 

 

 
 
 
171px-CB_Officer-Shins.png Lower Leg Armor
  • Camo pattern to simulate on-screen troopers.
    • Tan base coat
    • Camo patterns colored dark green and flat brown
  • May be lightly weathered.
  • Shin armor pieces are seamless.
  • 2 khaki or tan straps on each shin.
  • Black buckle and a smaller clip on each belt.

 

OPTIONAL Level two certification (if applicable):
  • Recommended camo colors:
    • Krylon Khaki Tan base coat.
    • Panzer Oliver Green.
    • Flat Earth Brown.
  • Black/grey/white misting.
  • Optional: paint scrapes may be represented with silver or chrome paint, not to exceed what is seen on screen.

 

 

 

 
 
 
200px-CB_Officer-Boot_Covers.png Boot Caps (Foot Armor)
  • Camo pattern to simulate on-screen troopers.
    • Tan base coat.
    • Camo patterns colored dark green and flat brown.
  • May be lightly weathered.
  • 2 black rings on upper outside edge of each boot cap.

 

OPTIONAL Level two certification (if applicable):
  • Recommended camo colors:
    • Krylon Khaki Tan base coat.
    • Panzer Oliver Green.
    • Flat Earth Brown.
  • Black/grey/white misting.
  • Optional: paint scrapes may be represented with silver or chrome paint, not to exceed what is seen on screen.
  • Black rings measure 1 inch in diameter.

 

 

 

 
 
 
175px-CB_Officer-Boots.png Boots
  • Boot color is gray or beige.
  • Boots have a curve shape in the arch area.
  • Soles are gray or beige.
  • May be lightly weathered.

 

OPTIONAL Level two certification (if applicable):
  • Boot sole has small arches carved out
    • 4 small arches on each side of the front of the boot
    • 2 small arches on each side of the heel

 

 

 

Optional Accessories

Items below are optional costume accessories. These items are not required for approval, but if present appear as described below. If adding in an accessory after initial approval, the item still needs to be submitted to local GML for approval before use.

 

 

200px-DC15_carbine.jpg DC-15S Blaster

Manufactured by BlasTech Industries, the DC-15S is smaller in scale than the DC-15A blaster rifle. Although it has a shorter range than that of the “A” model, it is easier to handle with a higher rate of fire and features a folding stock for braced firing.

  • Realistic Clone Style DC-15S Blaster.
  • Blaster may be scratch built out of plastic, wood, metal or cast in resin.
  • Blaster has realistic Episode II or Episode III details:
    • Wire frame sight.
    • Folding stock.
    • Twelve radiator fins evenly spaced along the length of barrel.
    • Igniter detail knobs.
    • Charge magazine clip on right side.
  • Total length is approximately 26 inches (66 cm).
  • Because of the scale, the Hasbro version is incorrect.

 

OPTIONAL Level two certification (if applicable):
  • Charge magazine detail on clip is metal to gun metal grey in color.
  • Detail bolts and screws are metal to gun metal grey in color.
  • Igniter knobs have some copper coloring.
  • Blaster is weathered.
  • OPTIONAL - Functioning Blue LED is installed in barrel.

 

 

 

 

 
 
 
133px-DC15_rifle.jpg DC-15A Blaster Rifle

Manufactured by BlasTech Industries, the DC-15A is a Tibanna gas cartridge powered weapon. Hyper-ionized blue plasma bolts are more than capable of penetrating armored units. Exceptionally effective against both droids and contemporary targets.

  • Realistic Clone Style DC-15A Blaster Rifle.
  • Blaster rifle is scratch built out of plastic, wood, metal or cast in resin.
  • Blaster has realistic Episode II or Episode III details:
    • Flip up sight in down position.
    • Ten radiator fins are evenly spaced along the length of the barrel.
    • Power setting adjuster detail lever.
    • Sniper Scope attached under rifle in storage position.
    • Charge magazine clip on left side.
    • Igniter detail knobs.
  • Total length is approximately 55 inches (139.7 cm).
  • Because of the scale, the Hasbro version is not allowed.

 

OPTIONAL Level two certification (if applicable):
  • Charge magazine detail on clip is metal to gun metal grey in color.
  • Detail bolts and screws are metal to gun metal grey in color.
  • Igniter has some copper coloring.
  • Power setting adjuster detail lever is metal or gun metal grey.
  • Sniper scope is metal or gun metal grey.
  • Blaster is weathered.
  • OPTIONAL - Functioning Blue LED is installed in barrel.
 
Posted

Going down the list, here is what I assume is the same as the officer:

- Balaclava

- Undersuit

- Shoulder Armor

- Elbow / Forearm Armor

- Gloves

- Cummerbund

- Pouches

- Belt

- Codpiece

- Knee Armor

- Boots

 

These are the areas that appear different:

- Helmet

Helmet is painted the same as a generic grunt but the section above the visor is painted a solid green color. 
 

- Upper Arm Armor

The dark green stripe goes straight down the side following the same line as the green stripe on the shoulder bells. The officer has this stripe go to a curve.
 

- Chest Armor

The chest is painted a solid green color. No camo.
 

- Back Armor

The back is painted a solid green color. No camo. 
 

- Lower Leg Armor

These are painted a solid green color. No camo. 
 

- Boot Caps

These are also painted a solid green color. 
 

 

Another thing I want to mention, it appears that the cod piece is a fabric material more so than an armor piece. This appears to be the case on all the trooper types. I’m not sure if it’s worth mentioning in the current CRLs that it could either be armor or a fabric. 

Posted

Something else I noticed about the Officer looking at the reference material, it appears that the two larger front pouches might actually be a dark green color similar to the dark green markings on the rest of the armor. 

Capture.jpeg.a109dda754451055544f86c9ba7c6481.jpeg

It’s hard to tell due to the darkness of the reference, but it does appear that these two pouches are very clearly a different color than the rest of them. This could be why I was having trouble determining if the Heavy had darker pouches or not. 

Posted

They're not.  They just look that way in the waiting room.  We used screencaps from the game to determine colors.

  • Like 1
Posted
17 minutes ago, BikerScout007 said:

They're not.  They just look that way in the waiting room.  We used screencaps from the game to determine colors.

That answers that then!

  • Like 1
Posted

I was able to take a few screenshots from a YouTube showcase video. I tried to get the best angles with what I was working with. 
 

A friend of mine who owns the game will also attempt to get some screenshots for me, but here’s what I got:

Here’s an angle showing off the detail on top of the radio pack. It’s a lighter gray color and it also appears there may be a green and red button. 

jVIznAA_d.webp?maxwidth=760&fidelity=gra
ujcyrD1_d.webp?maxwidth=760&fidelity=gra

The pouches are a darkish medium grey color similar to the officer:

PZYlulR_d.webp?maxwidth=760&fidelity=gra

And then a few more angles. The straps that go around the shin armor appear to be a lighter color but that could be deceiving as the armor surrounding it is a dark green color. Color theory be damned!

AxWdaX7_d.webp?maxwidth=760&fidelity=gra

Prn3hCQ_d.webp?maxwidth=760&fidelity=gra

wHbyE1N_d.webp?maxwidth=760&fidelity=gra

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...