neoakaj Posted July 11 Share Posted July 11 Hello all Starting a build for this. After much thinking and bouncing between this or the executioner I decided to land here! We have a growing number of first order troopers here in my garrison but no treadspeeder Helmet: Denuo Novo TLJ Premiere Armor: DN kit with 3d printed shins and knees with MrPoopy’s wonderful files! Gaskets: Geeky Pink’s Gloves: EndorFinders Boots: Unknown Pants: Unknown Neckseal: Geeky Pink’s or DN Blaster: Printed in house with the5thHorseman’s amazing files I have the majority of the armor trimmed and ready for assembly. I have all of my printers running for a Droideka currently but I suspect about a week or less and they will be free to print the shins and knees. And I have my blaster printed and about 90% assembled. I have the gaskets already in hand as well. the only items I am not sure of now is the pants and the boots. I heard that Geeky Pink might have considered making the pants but I cannot seem to get a hold of Teresa. Does anyone know? as for the boots, would something like this work for level 1? Of course painted white and logos removed https://a.co/d/08oOdsGy Hopefully in the future I can find a pair of AlpineStars on market or eBay but for now I’m just looking for something cheap ish to get started. I’ll post pictures in the next few days 1 1 Quote Link to comment Share on other sites More sharing options...
BikerScout007 Posted July 11 Share Posted July 11 @MrPoopie -- what did you guys did for @JollyRajR's pants? Those boots look pretty good to me for L1. Check ebay too. Used pairs of the originals show up all the time. 1 Quote Link to comment Share on other sites More sharing options...
MrPoopie Posted July 12 Share Posted July 12 16 hours ago, BikerScout007 said: @MrPoopie -- what did you guys did for @JollyRajR's pants? Those boots look pretty good to me for L1. Check ebay too. Used pairs of the originals show up all the time. I think they were these pants below, but just about any white "chef" pants would work the same. This pant style made it easy enough to find a matching fabric to make the padded sections. https://www.amazon.com/Chef-Designs-Mens-Pant-White/dp/B00DIA70XO/ref=sr_1_8?crid=1EBN8GIB37NI0&dib=eyJ2IjoiMSJ9.KMeFFmyxELPcuw3aqmirzTlbElImq5qnxOMENuPmnVcXN55Nsa9ATu8ume66hPvjJsrJOFaWKoST1lDH9vj1GCviR93pTWV4-qABtVrPor6Th6VwS1VUth1M26H5LMps_wysVz6dPLz1KzhlOGXB1iwMhPrTFlnJl-UIYY67NZ35DSXkCqVw8esdYplgVFCp_cZfrNSnBxiMuS-JS7BJFOFdtUTpiRzI5RzNH-7HhHsrH1LUm4AfpZjJM_qmSHopSxtUncO07NsHyqNR_s5Ri35dBJ8jGLpuBWfulI9_41A.vC60DwAseLVz2bEP4Zv6hOBiRineDZMqQSuE0h5DJlg&dib_tag=se&keywords=white+work+pants&qid=1720794635&sprefix=white+work+pants%2Caps%2C152&sr=8-8 1 Quote Link to comment Share on other sites More sharing options...
neoakaj Posted July 14 Author Share Posted July 14 On 7/12/2024 at 8:31 AM, MrPoopie said: I think they were these pants below, but just about any white "chef" pants would work the same. This pant style made it easy enough to find a matching fabric to make the padded sections. https://www.amazon.com/Chef-Designs-Mens-Pant-White/dp/B00DIA70XO/ref=sr_1_8?crid=1EBN8GIB37NI0&dib=eyJ2IjoiMSJ9.KMeFFmyxELPcuw3aqmirzTlbElImq5qnxOMENuPmnVcXN55Nsa9ATu8ume66hPvjJsrJOFaWKoST1lDH9vj1GCviR93pTWV4-qABtVrPor6Th6VwS1VUth1M26H5LMps_wysVz6dPLz1KzhlOGXB1iwMhPrTFlnJl-UIYY67NZ35DSXkCqVw8esdYplgVFCp_cZfrNSnBxiMuS-JS7BJFOFdtUTpiRzI5RzNH-7HhHsrH1LUm4AfpZjJM_qmSHopSxtUncO07NsHyqNR_s5Ri35dBJ8jGLpuBWfulI9_41A.vC60DwAseLVz2bEP4Zv6hOBiRineDZMqQSuE0h5DJlg&dib_tag=se&keywords=white+work+pants&qid=1720794635&sprefix=white+work+pants%2Caps%2C152&sr=8-8 Thank you and ordered! On 7/11/2024 at 3:42 PM, BikerScout007 said: @MrPoopie -- what did you guys did for @JollyRajR's pants? Those boots look pretty good to me for L1. Check ebay too. Used pairs of the originals show up all the time. I’ll keep a look for them. But for the time being glad to know they will work. as for progress. I dug out all the items and started assembling some parts. I also had a couple half built blasters so I finished them up. I will make new ones of the blasters so I can pay more attention to sanding since these are just printed in color. Was a trial last year for the new printer. currently I have shin and knee parts as well as a new TD on the printers, and a good majority of the armor getting close to sanding. tomorrow my goal is to be able to wear some of it. 1 Quote Link to comment Share on other sites More sharing options...
neoakaj Posted July 16 Author Share Posted July 16 Work got in the way so I didnt make much progress yesterday except some clear on the TD. Today I am back at it hoping to have something more done boots also ordered 1 Quote Link to comment Share on other sites More sharing options...
BikerScout007 Posted July 16 Share Posted July 16 Right now, the blasters are not part of the CRL -- the live action Treadspeeder driver didn't carry one and we don't have a CRL for the CGI version yet. Quote Link to comment Share on other sites More sharing options...
neoakaj Posted August 27 Author Share Posted August 27 Been a couple weeks without update. I have all of the armor completed including the knees and shins. We decided to make the pants in house and are nearly complete with them. I have the boots in hand now(basic for now). The only items left to do is paint the boots, assemble the belt, and do the strapping. I got a little off touch with finishing this as I was able to get some other low hanging fruit costumes finished up. I would expect that by next week ill be taking some pre app photos! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.