Noa Posted May 10 Share Posted May 10 Hello guys i started building a RotJ Scout Trooper the amor is 3d printed the helmet is from New Image Prop replicas. I spray painted my amor and thought it looked great. Afterwards i compared it with the helmet and noticed the big color gap. The helmet is more pure white. Do you guys know a matching paint color that gets as close as possible to the New image prop replicas helmet? Quote Link to comment Share on other sites More sharing options...
Chopper Posted May 10 Share Posted May 10 I can't say for sure what New Image uses for their exact paint color and I am not sure what it would be called in Germany, but if you can get a can of what's usually called "Appliance White", then that should be close at least to the helmet color. Otherwise, you may need to try a few brands of pure white on some scrap plastic to see how well they match. Note that the helmet and armor do not need to be an exact pantone match for clearance, but drastically noticeable color differences may be an issue. Quote Link to comment Share on other sites More sharing options...
Chopper Posted May 10 Share Posted May 10 You can also try emailing New Image to see if they can tell you the exact color or brand that they use. Quote Link to comment Share on other sites More sharing options...
Bikrtrash Posted May 10 Share Posted May 10 I also have the New Image Prop helmet - I emailed him about paint too, and his reply was "Diamond White". I could not find anything conclusive on that paint and emailed him again twice for clarification, never got a response. I ended up using Rust-oleum painter's touch 2X premium High-Gloss white (their # 331171) as that was the closest I could find in a spray paint - and I tried several. You can see my build progress in the forums, and my Lancer application (on hold) too for color comparison. Good luck! Quote Link to comment Share on other sites More sharing options...
Noa Posted May 11 Author Share Posted May 11 12 hours ago, Bikrtrash said: I also have the New Image Prop helmet - I emailed him about paint too, and his reply was "Diamond White". I could not find anything conclusive on that paint and emailed him again twice for clarification, never got a response. I ended up using Rust-oleum painter's touch 2X premium High-Gloss white (their # 331171) as that was the closest I could find in a spray paint - and I tried several. You can see my build progress in the forums, and my Lancer application (on hold) too for color comparison. Good luck! Thank you for your help, your build looks great. Did you us anything after you spray painted it in white because it looks so glossy like a sealer or something? Quote Link to comment Share on other sites More sharing options...
Noa Posted May 11 Author Share Posted May 11 12 hours ago, Chopper said: I can't say for sure what New Image uses for their exact paint color and I am not sure what it would be called in Germany, but if you can get a can of what's usually called "Appliance White", then that should be close at least to the helmet color. Otherwise, you may need to try a few brands of pure white on some scrap plastic to see how well they match. Note that the helmet and armor do not need to be an exact pantone match for clearance, but drastically noticeable color differences may be an issue. I think it woukd be best if you could tell yourself if its to much of a color gap but i cant put up photos in here because they are to big. Quote Link to comment Share on other sites More sharing options...
Bikrtrash Posted May 11 Share Posted May 11 Noa, I did use the Rust-Oleum Painter's Touch X2 Ultra Cover Gloss Clear (Their # 249117) make sure to read the instructions and use EXACTLY how it says, or it will do strange things- I had to redo a few pieces because I did not follow the instructions correctly. Quote Link to comment Share on other sites More sharing options...
Noa Posted May 11 Author Share Posted May 11 22 minutes ago, Bikrtrash said: Noa, I did use the Rust-Oleum Painter's Touch X2 Ultra Cover Gloss Clear (Their # 249117) make sure to read the instructions and use EXACTLY how it says, or it will do strange things- I had to redo a few pieces because I did not follow the instructions correctly. Thank you for your help, unfortunetly i cant get my hands on this type of spray paint because they dont sell this stuff in germany i will look for something else. But still a big thank you to everyone that answered. Quote Link to comment Share on other sites More sharing options...
Chopper Posted May 11 Share Posted May 11 @OnkelPaschulke are you able to help with the paint selection options? Quote Link to comment Share on other sites More sharing options...
OnkelPaschulke Posted May 11 Share Posted May 11 You could try this onehttps://toom.de/p/spruehlack-verkehrsweiss-matt-200-ml/8201130I don’t know if it will match the color perfectly. I used it for my helmet and matched the color of the SC armor quiet well. 1 Quote Link to comment Share on other sites More sharing options...
Noa Posted May 11 Author Share Posted May 11 3 hours ago, OnkelPaschulke said: You could try this one https://toom.de/p/spruehlack-verkehrsweiss-matt-200-ml/8201130 I don’t know if it will match the color perfectly. I used it for my helmet and matched the color of the SC armor quiet well. Genau das habe ich benutzt für meine rüstung lustigerweise. Der Helm setzt sich jedoch schon davon ab. Bin mir nicht sicher ob das inordung ist. (I used this exact paint for my amor. The color of the helmet is still a bit diffrent and i dont know if that would get me approved) Quote Link to comment Share on other sites More sharing options...
OnkelPaschulke Posted May 12 Share Posted May 12 Hmmm... Die richtig Farbe zu bekommen ist dann schon eher schwierig. Planst du die Rüstung zu weathern? Ggfs. fällt es dann auch nicht so auf. Ansonsten kannst du dich zusätzlich noch im Forum der German Garrison anmelden. Da kannst du das parallel anfragen. 1 Quote Link to comment Share on other sites More sharing options...
Noa Posted May 12 Author Share Posted May 12 1 hour ago, OnkelPaschulke said: Hmmm... Die richtig Farbe zu bekommen ist dann schon eher schwierig. Planst du die Rüstung zu weathern? Ggfs. fällt es dann auch nicht so auf. Ansonsten kannst du dich zusätzlich noch im Forum der German Garrison anmelden. Da kannst du das parallel anfragen. Ja hab sie jetzt geweathered hat definitiv geholfen wenn ich jetzt noch klar lack zum versiegeln benutze sollte der unterschied nicht mehr so stark erkennbar sein. Würde gerne ein Bild hochladen damit erfahrene Mitglieder es bewerten können aber die datein sind zu groß, dass sagt zumindest das forum hier Quote Link to comment Share on other sites More sharing options...
OnkelPaschulke Posted May 12 Share Posted May 12 Weathering macht einfach viel aus. Wenn du Dropbox Nutzer bist, dann kannst du es hier auch posten. Ansonsten gibt es noch andere Optionen. Mickey hat die gesammelt. FAQ - How do I post images? https://r.tapatalk.com/shareLink/topic?share_fid=2091901&share_tid=23053&url=https://forum.501stpathfinders.com/index.php?/topic/23053-FAQ---How-do-I-post-images%3F&share_type=t&link_source=appGesendet von iPhone mit Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
Noa Posted May 13 Author Share Posted May 13 21 hours ago, OnkelPaschulke said: Weathering macht einfach viel aus. Wenn du Dropbox Nutzer bist, dann kannst du es hier auch posten. Ansonsten gibt es noch andere Optionen. Mickey hat die gesammelt. FAQ - How do I post images? https://r.tapatalk.com/shareLink/topic?share_fid=2091901&share_tid=23053&url=https://forum.501stpathfinders.com/index.php?/topic/23053-FAQ---How-do-I-post-images%3F&share_type=t&link_source=app Gesendet von iPhone mit Tapatalk https://www.dropbox.com/scl/fi/brw9edlduocfp7eok469e/20240511_113413.jpg?rlkey=1kup2736xi5gv12uczbj6kmit&dl=0 Kann man das jetzt öffnen kenne mich leider nicht aus mit sowas. Quote Link to comment Share on other sites More sharing options...
Chopper Posted May 13 Share Posted May 13 That's not a huge difference in shade. I think the primary issue is that the finish is very different. If you put a gloss or semi gloss coat on the armor, I don't think the difference will be as apparent. Quote Link to comment Share on other sites More sharing options...
OnkelPaschulke Posted May 13 Share Posted May 13 Like @chopper said, it’s not that huge difference. Maybe you should got small cans of gloss and semi gloss clear coat and test it on some spare parts to get the best matching results. I used clear coat from my local hardware store (toom) 1 1 Quote Link to comment Share on other sites More sharing options...
Noa Posted May 13 Author Share Posted May 13 So it shouldnt be aproblem if i get them parts glossy aswell because its a dream of mine to get accepted. Quote Link to comment Share on other sites More sharing options...
OnkelPaschulke Posted May 14 Share Posted May 14 The most important thing is the CRL. And it says „Gloss white or semi-gloss and may be lightly weathered.“ for every single part of the hardparts of the armor. I guess it would be more of an issue if the the helmet is gloss and the rest is semi gloss. Gesendet von iPhone mit Tapatalk Quote Link to comment Share on other sites More sharing options...
Noa Posted May 14 Author Share Posted May 14 8 hours ago, OnkelPaschulke said: The most important thing is the CRL. And it says „Gloss white or semi-gloss and may be lightly weathered.“ for every single part of the hardparts of the armor. I guess it would be more of an issue if the the helmet is gloss and the rest is semi gloss. Gesendet von iPhone mit Tapatalk What would you say fits better is the helmet gloss or semi gloss white? Quote Link to comment Share on other sites More sharing options...
Chopper Posted May 14 Share Posted May 14 I would try semi gloss first. Quote Link to comment Share on other sites More sharing options...
Noa Posted May 14 Author Share Posted May 14 Ok i will try. I send you an update if it worked. Quote Link to comment Share on other sites More sharing options...
Noa Posted May 14 Author Share Posted May 14 Just now, Noa said: I think its all good now i added a layer of clear coat (klarlack). What do you guys think? https://www.dropbox.com/scl/fi/29jurnkzs7a4osvf66hyy/20240514_180250.jpg?rlkey=x9avltwmenum3jlo77hoevgxl&dl=0 1 Quote Link to comment Share on other sites More sharing options...
Chopper Posted May 14 Share Posted May 14 Looks good Quote Link to comment Share on other sites More sharing options...
OnkelPaschulke Posted May 14 Share Posted May 14 I think it looks good so far. Maybe it could be a little bit more shinier. But most of the time it comes all together when you take pictures of the whole armor.Gesendet von iPhone mit Tapatalk Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.