Rivets for belt

[PinewoodScout]

Can anyone send a picture of the rivets on the belt connecting the plastic? I know it is a 3mm rivet but I am unsure of what style. 

[Chopper]

Hi, these are the rivets you should be looking for:

https://www.acehardware.com/departments/tools/fastening-tools/rivets/2014041?store=16714&gclid=Cj0KCQiAz9ieBhCIARIsACB0oGJeVuTTk2MBfU8bN5tqhKElm_laoCCP73A-yxRO9NpvqeB1BlSvaSAaAmM5EALw_wcB&gclsrc=aw.ds

[Dart]

Also, make sure you give yourself a good shim or washer on the other side of the webbing to help the rivet grab properly. If you make yourself a little washer out of leftover plastic, 1/2" or so, that should help lock in that rivet.

[DukeOfNachos]

How I did my belt rivets.

[Aradun]

You definitely want to do a set up similar to the Duke’s above. Just using the small metal washer alone will result in failure over time because the stress on the belt will eventually pull the washer through the fabric. Adding the plastic abs backing will alleviate that issue.