WIP - HokieScout24 - ROTJ Scout Trooper Build *First Ever!*

[HokieScout24]

Pieces and parts have started to arrive and excited about the build project!

[Aradun]

Awesome! BBB day is always the best! Really looking forward to seeing your build. If you have any questions, don’t hesitate to ask. The armory team is here if you need us!

[Hask]

Looking forward to seeing your progress.

[hokie1]

Are you a Virginia Tech grad based on your name? I’m a Hokie as well. 

[HokieScout24]

Hokie Hokie Hokie Hi!!

[HokieScout24]

Trimming and some painting done so far.  First step in helmet build…Devcon plastic weld.

[Retrofire]

Off to a great start! Remember slow and easy wins the race so take your time and let us know if you need anything. If you haven't had had the opportunity I would recommend reaching out to your local Garrison which for you is the Carolina Garrison here: http://www.carolinagarrison.net/

They are the folks that will be approving your costume for entry into the 501st. Get a forum account and get to know your local troopers.

Keep up the great work. We're looking forward to seeing you progress on this build!

[HokieScout24]

Best practice in attaching the tank to the back armor?!?  Any suggestions?  I’ve heard to river to tank piece, easy, but where do you rivet the bottom of the tank piece to the back armor?  How do you attach the 1/2 elastic strip?  Just making sure.   Also…concerned I cut too much off and the spacing is tight on the tank topper and edge.

[Retrofire]

Hi Jay! The WTF tank topper is known to be oversize. It's not a problem for basic approval but it wouldn't be approvable for Lancer (lvl2). To attach the tank topper you'll need to drill through the topper and tank then install a rivet/washer combo as shown in the CRL here: https://databank.501st.com/mw501/images/2/2f/TB_tank_greeblie.jpg When you install the rivet you can add a piece of 1/2 inch elastic then run it over the back of the armor and attach to the inside. Note that the elastic is optional for basic and Lancer and you don't have to include it unless you really want it.

The rivet on the bottom of the tank can be blind if necessary. Some folks attach the tank using velcro (pulled into the back armor), some folks use E6000, and some folks rivet it if they have enough "meat" to run the rivet into between the tank and armor. If you don't have enough you could split the tank so use caution if using this method. There are some great build threads that use all these methods.

Your build is going along really well so keep up the great work!!

 

[Chopper]

I'd still encourage you to get a replacement tank topper from studio creations. The one that comes with the WTF kit is ridiculously oversized and the casting quality can be iffy as well.

https://studiocreations.com/howto/bikerscout/forsale_bike_replacementparts.html

From the CRL:

Your local GML has final say on basic approval but IMO some of the scout stuff WTF supplies can push the limit. 

[HokieScout24]

Adding Google Album link to track progress:  https://photos.app.goo.gl/RnarH75obRrqFVSf6

[HokieScout24]

Progress continues and new pics added to the google album link above.

Bicep and Elbow armor completed.  Back armor tank completed.  Boot holdster completed.  

 

[HokieScout24]

Priming the lid!

 

[HokieScout24]

[HokieScout24]

Major progress as the helmet has been completed.  Pics on the google link in previous post.  Almost ready for approval submittal…😬😬😬

[HokieScout24]

Here are some shots from the first full attempt to try on the complete ensemble.  Would love suggestions and areas that need attention.  First glance, looks like the cumberbun needs to be higher, the shoulder armor pieces need to be higher and attached to the shoulder straps, and the bicep armor needs to be higher.  Anything else stand out from what you can see?  

[Chopper]

Hey FYI the photos aren't displaying. Where are you hosting them?

[HokieScout24]

Weird…they are in the google album as well:  https://photos.app.goo.gl/RnarH75obRrqFVSf6

[Aradun]

Nice work and love that Stormtrooper mug in your photo album. A couple of dressing tips which you’ve already identified...

1) Your shoulder bells can come up. Their ideal position should be roughly an 1” or so from the should bridge. That will allow you to better space out your biceps and forearms too.

2) The cummerbund should rest on top of your belt and the belt should sit just below your naval. Adding some Velcro to the bottom of your chest armor and onto the tabs of your pouches will keep your bund from slipping down. Here’s a great post with tips and tricks.

http://forum.501stpathfinders.com/index.php?/topic/w18894-some-tips-for-keeping-your-scout-costume-together-while-trooping/

3) Your cod can come up as well. However, raising your bund will likely remedy the cod.

Excellent work on the helmet! Everything’s coming together. You’re doing great! The finish line is in sight!

[HokieScout24]

Thank you for the advice and for the tips.  Back to work!!

[HokieScout24]

Approval request has been submitted!!  Here we go!  
 

 

[DukeOfNachos]

Good luck! I’m playing the waiting game as well

[nateopotato]

Best of luck to you!

[Aradun]

Good luck Jay - looking forward to your approval!  

[HokieScout24]

📢 This just in...501st APPROVED!!  Scout Trooper 62379 reporting for duty! 👍👍