Looking for help

[Lefty85]

Looking for anyone in grand rapids or muskegon area of michigan. I just bought my first wtf biker scout armor i have no clue what im doing and could some good guidance. I have not seen this armor up close so pics can only do so much. 

[Chopper]

We're always happy to help however we can via photos and advice. However, if you're looking for physical help, maybe @ForesterDesign can help point you towards someone in your area that can be of assistance?

If you haven't already, I recommend that you register on the Great Lakes Garrison Forums, as that may help get you in touch with someone local as well: https://www.greatlakesgarrison.com/forum/

[Lefty85]

Thank you very i mainly looking for how to start like a step by step tutorial. Where to cut what not to cut things like that. I have armor but it is in its raw form and no instructions on how or what. I am flying blind. 

[Chopper]

There aren't a ton of WTF build threads with lots of photos out there. However, for guidance I would take a look at Jason's (RIP) build thread here:

http://forum.501stpathfinders.com/index.php?/topic/19025-wtf-armor-build/

I would also look at these other non-WTF threads for additional info:

Strider's Lancer build thread:

http://forum.501stpathfinders.com/index.php?/topic/17305-lancer-build-tutorial/

Panda's build thread (note this one is older, so the images are good, but some aspects pre-date the most current CRL):

http://forum.501stpathfinders.com/index.php?/topic/9781-pandatroopers-sc-biker-scout-build/&tab=comments#comment-81496

And make sure to keep an eye on the CRL to make sure whatever you're doing complies with what's written:

https://databank.501st.com/databank/Costuming:TB_Scout_trooper

You can also use photos from the CRL to help just fit and proportions.

Feel free to ask us if you have any questions.

[Lefty85]

Thanks lots of good info

[troygordon2]

I used the Panda thread BIG TIME in my build, though as stated, some of the materials have been updated (don't buy a heat iron) but you'll see what looks right and what looks wrong pretty quick:  

 

I am also a big fan of looking at the Lancer submissions.  This was my go to:

If you build to Lancer status, you should be fine.  I can't speak to helmet builds, I made my own, but the rest is priceless information.  I recommend a heavy duty sewing machine too, even if you order the soft parts separately.  You'll get very familiar with sewing on this quest.  Also, I'd recommend buying more velcro, both the adhesive and non-adhesive types.  Don't feel bad about asking for help, we've all been the ones making our first outfit and looking for approval.  

Go forth and do good for the glory of the Empire!

 

[Lefty85]

I have officially started amd based on these posts and threads i may come out of this just fine. As for sewing got that covered ex military and currently a wwii reeanctor.

[Retrofire]

We’re here if you need us so don’t hesitate to shout out if you need anything.

[Captain Doof]

Where can I buy a costume 

[Retrofire]

Hi Ethan and Happy Holidays!

I think @BikerScout007 has addressed your question in another thread. I would also recommend reaching out to Scouts in the Canadian Garrison to see what they are using. We're always here if you should need so don't hesitate to reach out to us if you have further questions.

[ForesterDesign]

On 12/19/2020 at 10:42 AM, Chopper said:

We're always happy to help however we can via photos and advice. However, if you're looking for physical help, maybe @ForesterDesign can help point you towards someone in your area that can be of assistance?

If you haven't already, I recommend that you register on the Great Lakes Garrison Forums, as that may help get you in touch with someone local as well: https://www.greatlakesgarrison.com/forum/

Sorry I missed this! We have a few troopers around that area. We're working on a WTF build right now up here in the Upper Peninsula. How far along have you gotten? I can reach out to some other members closer to you in the lower Peninsula.