order-66 Posted August 28, 2020 Share Posted August 28, 2020 Conrad L. TB-50106 Southern California Garrison Biker Scout Return of the Jedi Lancer Submission Armor & Helmet: Studio Creations Flight Suit: Modified Red Cap Flak vest, cummerbund, cod, and pouches: Handmade Gloves: Wampa Wear Boots: ScoutBoots Blaster: 3D Print Thank you for taking the time to review my submission. url=https://flic.kr/p/2jAKRB5][/url]IMG_5076 by C L, on Flickr IMG_5095 by C L, on Flickr IMG_5100 by C L, on Flickr IMG_5101 by C L, on Flickr IMG_5103 by C L, on Flickr IMG_5108 by C L, on Flickr IMG_5117 by C L, on Flickr IMG_5144 by C L, on Flickr IMG_3094 by C L, on Flickr IMG_2958 by C L, on Flickr IMG_2961 by C L, on Flickr IMG_2962 by C L, on Flickr IMG_2963 by C L, on Flickr IMG_2964 by C L, on Flickr IMG_2966 by C L, on Flickr IMG_2967 by C L, on Flickr IMG_2973 by C L, on Flickr IMG_2975 by C L, on Flickr IMG_2983 by C L, on Flickr IMG_2986 by C L, on Flickr IMG_2990 by C L, on Flickr IMG_2993 by C L, on Flickr IMG_3091 by C L, on Flickr IMG_3001 by C L, on Flickr IMG_2999 by C L, on Flickr Thanks again for your time. Link to comment Share on other sites More sharing options...
Chopper Posted August 28, 2020 Share Posted August 28, 2020 Hello and thank you for your Lancer submission. The team will get back to you shortly. One thing we ask -- could you please change the permissions settings for access to images on your flickr page? It asks for a login to view the full resolution photos via the links. Thank you. Link to comment Share on other sites More sharing options...
order-66 Posted August 28, 2020 Author Share Posted August 28, 2020 5 hours ago, Chopper said: Hello and thank you for your Lancer submission. The team will get back to you shortly. One thing we ask -- could you please change the permissions settings for access to images on your flickr page? It asks for a login to view the full resolution photos via the links. Thank you. Hello Mr. Corey Thank you for your response. I have changed the settings on the images. Pls let me know if there are any other issues viewing the photos. Thank you again for your time. Link to comment Share on other sites More sharing options...
Chopper Posted September 2, 2020 Share Posted September 2, 2020 Hello! Thank you again for your patience. The Lancer Review team has gone over your application and we have the following comments for you to address: Flight Suit The butt flap on the back side of your flight suit appears long. You will need to trim it vertically about 1.5" to 2" Your thigh straps are positioned low. They should ideally be about at the halfway point of your legs. Estimate that they should come up about 2". See photo. Also, when you move your thigh straps, they will need to be more snug against your leg. As is they are too loose. The legs of your flight suit appear to be baggy. However, we would like to see how it looks once you've moved the thigh straps up and made them more snug, before we get into additional tailoring. Shoulder Armor Your right shoulder should come in a bit to match the left. This may just be a dressing issues as the positioning looks about right from the back side. Belt and Detonator Please center your drop box strap clips on the webbing, particularly on the rear side. Knee Armor The lower elastic for your knee armor looks to be 1" in width. According to the CRL it should be either 1/2" or 3/4". Cod Dressing issue -- Your cod isn't laying flat and looks slightly angled to your left. If you raise it slightly it should help a bit with getting it to lie flat on the front of your body. Bund The bund should ideally sit on the top of your belt and should not be tucked into your belt. If you're not able to raise the bund up, so it's sitting on top of the belt, then you may need to do some tailoring to re-size the vertical height of the bund. Helmet Can you please provide a top down shot of your helmet? The SC helmet features a two-piece "back and cap" construction, which is fine for Level 2, but the seams will need to be filled. Also, the return edge on the top of your visor appears uneven. Please trim the upper visor return edge on the your right to match the left. I've marked the section we're referring to, as well as the suggested trim. See photo. Bicep Armor Again, this is just a dressing issue, but please rotate your bicep armor so that they're facing outwards at a 90 degree position on each arm. They look like they're in the right place in some of the photos, so they may just be moving around a bit. You may want to look at using velcro to keep them in position, if you haven't already. Overall, a very good job on your application! With the exception of the visor trimming, most of these items are dressing issues and some tailoring adjustments, so hopefully it will not cause you too much trouble. Please let us know if you have any questions, or if you need any guidance on putting the adjustments in place. Link to comment Share on other sites More sharing options...
order-66 Posted February 12, 2021 Author Share Posted February 12, 2021 http://IMG_4686 by C L, on Flickr http://IMG_7198 by C L, on Flickr http://IMG_7203 by C L, on Flickr http://IMG_7207 by C L, on Flickr http://IMG_4695 by C L, on Flickr Flight Suit The butt flap trimmed 2" Thigh straps are positioned up about 2" and tailored snug against leg. Shoulder Armor Right shoulder matches the left. Belt and Detonator Drop box strap clips centered on the webbing. Knee Armor Lower knee elastic 1/2" Cod Dressing issue -- cod laying flat. Raised slightly to lie flat on the front of body. Bund The bund sitting on the top of belt and not tucked into belt. Helmet Photo provided for top, down shot of helmet. Also, the return edge on the top of visor trimmed. Bicep Armor Dressing issue, rotated bicep armor so that they're facing outwards at a 90 degree position on each arm. Velcro attached to keep them in position. Thank you! Link to comment Share on other sites More sharing options...
Chopper Posted February 13, 2021 Share Posted February 13, 2021 Hello! The Level 2 Review Team has reviewed your corrections and we're happy to announce that you have earned the title of Lancer! Congratulations! Just as a heads up for your benefit, we did have two dressing items to take note of, for when you suit up again -- The front of your belt looks like it's drooping a bit, likely due to the bund pushing it down. You might want to put some velcro on your flak vest and the top of your bund to help hold it up. The second item is to move your forearms down a bit, so their sitting further over the tops of the gloves. Overall, great work and congratulations!!! 1 Link to comment Share on other sites More sharing options...
equuspolo Posted February 14, 2021 Share Posted February 14, 2021 Nicely done brother. Congratulations 1 Link to comment Share on other sites More sharing options...
Recommended Posts