CB - Kashyyyk Officer - Battlefront 2

[BikerScout007]

For drafting purposes only.  Nothing is final until it is posted to the Wiki

 

Required Costume Components

The following costume components are present and appear as described below.

 

	Helmet Camo pattern to simulate on-screen troopers. Tan base coat. Camo patterns are colored dark green and flat brown. Most of the helmet is painted dark green: The entire visor; The back half of the helmet; The dome other than one thick camo stripe along the center; The cheek plates. May be lightly weathered. Full set of black greeblies: 2 breathers, five bar snout piece and visor bolts. Visor has a reflective green lens. A rectangular slot is centered in the middle of the visor. Inside of visor is painted the same base color as the armor. Helmet decal matches the screen-used. Rear trapezoids and 9 black stripes on back lower left may either be painted or decals.
	OPTIONAL Level two certification (if applicable): Recommended camo colors: Krylon Khaki Tan base coat. Panzer Oliver Green. Flat Earth Brown. Black/grey/white misting . Optional: paint scrapes may be represented with silver or chrome paint, not to exceed what is seen on screen. Visor rectangular slot measures 2.25 inches long and 0.5 inches wide.

---

 

 

	Balaclava A balaclava is a black head sock/hood that is worn under the helmet and is used primarily to hide any view of the wearer’s skin and/or facial hair.

---

 

	Under Suit Jacket and pants or jumpsuit. Dark Camouflage pattern should resemble look of screen troopers. No multi-cam or digital camo. No visible pockets when the armor is worn. Large leg pouches have a biased cut flap on the outside, placed in the correct position. Gray, tan or oatmeal riding patch on inner thigh.
	OPTIONAL Level two certification (if applicable): British Desert DPM camo dyed brown and black to make them darker. Riding patches are made of leather or suede. Leg pouches must be constructed and measure 6 inches high by 4 inches wide by 1.5 inches deep.

---

 

	Shoulder Armor Camo pattern to simulate on-screen troopers. Tan base coat Camo patterns colored dark green and flat brown Thick dark green stripe down the middle of shoulder bell. May be lightly weathered.
	OPTIONAL Level two certification (if applicable): Recommended camo colors: Krylon Khaki Tan base coat Panzer Oliver Green Flat Earth Brown Black/grey/white misting. Optional: paint scrapes may be represented with silver or chrome paint, not to exceed what is seen on screen.

---

 

	Upper Arm Armor Camo pattern to simulate on-screen troopers. Tan base coat. Camo patterns colored dark green and flat brown. Outer portion is painted dark green. May be lightly weathered. Left bicep armor has a gray strap and gray greeblie. Right bicep armor has a gray greeblie.
	OPTIONAL Level two certification (if applicable): Recommended camo colors: Krylon Khaki Tan base coat. Panzer Oliver Green. Flat Earth Brown. Black/grey/white misting. Optional: paint scrapes may be represented with silver or chrome paint, not to exceed what is seen on screen. Bicep armor greeblies are screen accurate.

---

 

	Elbow / Forearm Armor Camo pattern to simulate on-screen troopers. Tan base coat. Camo patterns colored dark green and flat brown. May be lightly weathered. 2 grey straps for each forearm piece.
	OPTIONAL Level two certification (if applicable): Recommended camo colors: Krylon Khaki Tan base coat Panzer Oliver Green Flat Earth Brown Black/grey/white misting. Optional: paint scrapes may be represented with silver or chrome paint, not to exceed what is seen on screen.

---

 

	Gloves Gauntlet-style gloves. black leather from the fingers to the wrists. gauntlet section is brown. back of hand has 2 light gray patches. 2 rubber greeblies (gray or taupe) on gauntlets. Gray strap circles the wrist. No labels/logos, clips or external straps
	OPTIONAL Level two certification (if applicable): Glove greeblie is screen accurate. Wrist strap has small buckle detail.

---

 

	Chest Armor Camo pattern to simulate on-screen troopers. Tan base coat. Camo patterns colored dark green and flat brown. Trimmed in dark green along the middle indent and bottom edge. May be lightly weathered. 2 grey colored straps connect the chest and back plates.
	OPTIONAL Level two certification (if applicable): Recommended camo colors: Krylon Khaki Tan base coat. Panzer Oliver Green. Flat Earth Brown. Black/grey/white misting. Optional: paint scrapes may be represented with silver or chrome paint, not to exceed what is seen on screen. Armor joins flush on the sides.

---

 

	Back Armor Camo pattern to simulate on-screen troopers. Tan base coat. Camo patterns colored dark green and flat brown. May be lightly weathered. Back plate has a tank attached. Top of the tank is flat with a detail piece painted white: Detail piece has a black "dial" with a white handle. There is a red button in the upper right portion. There is a green button in the lower left portion. The other buttons on the detail piece are black.
	OPTIONAL Level two certification (if applicable): Recommended camo colors: Krylon Khaki Tan base coat. Panzer Oliver Green. Flat Earth Brown. Black/grey/white misting. Optional: paint scrapes may be represented with silver or chrome paint, not to exceed what is seen on screen.

---

 

	Cummerbund Dark gray base with dark gray vertical straps. Closure in the back, covered by tank and rear pouches. A midsection belt goes around cummerbund. Belt has 2 silver buckles on the front. 16 pouches of various sizes and shapes attach to the cummerbund. Molle vests or variants are not acceptable.
	OPTIONAL Level two certification (if applicable): Base and vertical straps are the same color gray. Cummerbund has green camo patches. Midsection belt is 2 inches tall and goes around entire cummerbund.

---

 

	Pouches 16 pouches resembling size of screen-used. Pouches have different closing flap configurations. Pouches are same color as cummerbund. 2 long front pouches. 2 small rectangular front pouches. 8 small side pouches. 2 long back pouches. 2 large rectangular back pouches
	OPTIONAL Level two certification (if applicable): Cummerbund pouch sizes as follows: 2 Long front pouches: 7 inches high x 4 inches wide x 1.5 inches deep 2 small front pouches: 2.5 inches high x 4 inches wide x 1.5 inches deep 8 small side pouches Top 4 small side pouches are 3 inches tall x 4 inches wide x 1.5 inches deep Bottom 4 small pouches are 4.5 inches tall x 4 inches wide x 1.5 inches deep 2 Long back pouches: 7 inches high x 4 inches wide x 1.5 inches deep 2 rectangular back pouches: 4 inches high x 7 inches wide x 1.5 inches deep

---

 

	Belt Grey with black insets. 2 trapezoid drop boxes hang from belt and belt buckle by 4 tan straps. Color matches the cummerbund and pouches.
	OPTIONAL Level two certification (if applicable): Buckle is gunmetal gray. Dropbox straps are 1/2 inch wide.

---

 

	Codpiece Triangular in shape. Painted in camo pattern to match armor. May be lightly weathered. Attaches to backside of belt buckle.

---

 

	Knee Armor Camo pattern to simulate on-screen troopers. Tan base coat. Camo patterns colored dark green and flat brown. May be lightly weathered. Grey straps for each piece of knee armor.
	OPTIONAL Level two certification (if applicable): Recommended camo colors: Krylon Khaki Tan base coat. Panzer Oliver Green. Flat Earth Brown. Black/grey/white misting. Optional: paint scrapes may be represented with silver or chrome paint, not to exceed what is seen on screen.

---

 

	Lower Leg Armor Camo pattern to simulate on-screen troopers. Tan base coat Camo patterns colored dark green and flat brown May be lightly weathered. Shin armor pieces are seamless. 2 khaki or tan straps on each shin. Black buckle and a smaller clip on each belt.
	OPTIONAL Level two certification (if applicable): Recommended camo colors: Krylon Khaki Tan base coat. Panzer Oliver Green. Flat Earth Brown. Black/grey/white misting. Optional: paint scrapes may be represented with silver or chrome paint, not to exceed what is seen on screen.

---

 

	Boot Caps (Foot Armor) Camo pattern to simulate on-screen troopers. Tan base coat. Camo patterns colored dark green and flat brown. May be lightly weathered. 2 black rings on upper outside edge of each boot cap.
	OPTIONAL Level two certification (if applicable): Recommended camo colors: Krylon Khaki Tan base coat. Panzer Oliver Green. Flat Earth Brown. Black/grey/white misting. Optional: paint scrapes may be represented with silver or chrome paint, not to exceed what is seen on screen. Black rings measure 1 inch in diameter.

---

 

	Boots Boot color is gray or beige. Boots have a curve shape in the arch area. Soles are gray or beige. May be lightly weathered.
	OPTIONAL Level two certification (if applicable): Boot sole has small arches carved out 4 small arches on each side of the front of the boot 2 small arches on each side of the heel

---

 

Optional Accessories

Items below are optional costume accessories. These items are not required for approval, but if present appear as described below. If adding in an accessory after initial approval, the item still needs to be submitted to local GML for approval before use.

 

	DC-15S Blaster Manufactured by BlasTech Industries the DC-15S is smaller in scale than the DC-15A blaster rifle. Although it has a shorter range than that of the “A” model, it is easier to handle with a higher rate of fire. It features a folding stock for braced firing. Realistic Clone Style DC-15S Blaster. Blaster may be scratch built out of plastic, wood, metal or cast in resin. Blaster has realistic Episode II or Episode III details: Wire frame sight. Folding stock. Twelve (12) radiator fins evenly spaced along the length of barrel. Igniter detail knobs. Charge magazine clip on right side. Total length is approximately 26" (66 cm). Because of the scale, the Hasbro version is incorrect.
	OPTIONAL Level two certification (if applicable): Charge magazine detail on clip is metal to gun metal grey in color. Detail bolts and screws are metal to gun metal grey in color. Igniter knobs have some copper coloring. Blaster is weathered.
	OPTIONAL Level three certification (if applicable): Functioning Blue LED is installed in barrel.

---

 

 

	DC-15A Blaster Rifle Manufactured by BlasTech Industries, the DC-15A is a tibanna gas, cartridge powered weapon. Hyper-ionized blue plasma bolts are more than capable of penetrating armored units. Exceptionally effective against both droids and contemporary targets. Realistic Clone Style DC-15A Blaster Rifle. Blaster rifle is scratch built out of plastic, wood, metal or cast in resin. Blaster has realistic Episode II or Episode III details: Flip up sight in down position. (10) radiator fins evenly spaced along the length of barrel. Power setting adjuster detail lever. Sniper Scope attached under rifle in storage position. Charge magazine clip on left side. Igniter detail knobs. Total length is approximately 55 inches (139.7 cm). Because of the scale, the Hasbro version is not allowed.
	OPTIONAL Level two certification (if applicable): Charge magazine detail on clip is metal to gun metal grey in color. Detail bolts and screws are metal to gun metal grey in color. Igniter has some copper coloring. Power setting adjuster detail lever is metal or gun metal grey. Sniper scope is metal or gun metal grey. Blaster is weathered.
	OPTIONAL Level three certification (if applicable): Functioning Blue LED is installed in barrel.

 

[TB-61231]

At the Kashyyyk Trooper Officer I bring it on before the CRL gets released. The Clone Officers at Battlefront 2 are using one DC-17 pistol as primary standard weapon.

Hope not to annoy you too much. 😅

[BikerScout007]

1 hour ago, TB-61231 said:

At the Kashyyyk Trooper Officer I bring it on before the CRL gets released. The Clone Officers at Battlefront 2 are using one DC-17 pistol as primary standard weapon.

Hope not to annoy you too much. 😅

Not at all.  I appreciate it!

Now let's see if @yoshix gets this one done.  Because no costume, no CRL!

[yoshix]

2 hours ago, BikerScout007 said:

Not at all.  I appreciate it!

Now let's see if @yoshix gets this one done.  Because no costume, no CRL!

 So very sorry for the super long delay. I've been distracted working on a phase one clone. I'm still on the case. I'll be starting up again very soon.

[BikerScout007]

1 minute ago, yoshix said:

 So very sorry for the super long delay. I've been distracted working on a phase one clone. I'm still on the case. I'll be starting up again very soon.

No problem man!  We knocked out 6 CRLs in 2020 so I had my hands full already.  Looking forward to it

[BikerScout007]

Updated to better describe the screen grabs

[BikerScout007]

@yoshix

I updated the CRL draft with current language and your photos.   Let me know if you see anything amiss.

Question -- the undersuit in the game appears to have a camo pattern, but the photo you submitted to me doesn't (or at least it's hard to see if it's there).  Do you have another source showing no camo from the game?

Also seeing camo on the cummerbund, which we've noted on the film cummerbund as well.  Is there a game image without camo on the bund?

[yoshix]

@BikerScout007

I did notice some sporting on the cummerbund but I figured it was supposed to represent dirty/battle warn. I can attempt to color it but I may need some  guidance on that.

As for the under suit, I used the standard kashyyyk trooper British Desert camo DPM dyed brown. I can take some different pictures if you like, but I can see the camo in the picture you edited. Can you clarify? 

The pictures look great by the way!

 

[BikerScout007]

3 minutes ago, yoshix said:

@BikerScout007

I did notice some sporting on the cummerbund but I figured it was supposed to represent dirty/battle warn. I can attempt to color it but I may need some  guidance on that.

As for the under suit, I used the standard kashyyyk trooper British Desert camo DPM dyed brown. I can take some different pictures if you like, but I can see the camo in the picture you edited. Can you clarify? 

The pictures look great by the way!

 

Okay... once I blew the picture up, squinted my eyes and turned my head just right, I could see camo.     But honestly, I just thought it was gradations in color due to the wrinkles in the fabric, whereas in the screen grab you can clearly see what looks like gray camo patches:

As for the cummerbund, it's something we noticed on the originals.  We thought it was dirt at first too but on closer examination it seemed a lot more deliberate.  So we made it a level 2 requirement for the Kashyyyk (though no one has ever gone for L2). 

Do you have a screengrabs from the game where we can see the bund better?  I tried looking through your old pics but the links seemed to be broken.

 

[yoshix]

I agree, my under suit is a little dark, a side effect of dying it. But I think darker is better that the alternative of too light. I don't think it's dark gray patches though, I think its dark tan.

The camo on the cumcummerbund seams to seep down from the pack and chest (hence why I thought it was dirt)

Could we maker that a level two requirement as well? I'm very hesitant about coloring the cummerbund. It would be really hard to get an even or targeted coloring especially because it's made of two different materials, nylon strap and (what I assume is) a cotton blend. 

If need be, what I was thinking was maybe dilute so bleach and try to spot apply it, then try to add dye to those spots. What do you think?

[BikerScout007]

RE:  the cummerbund camo -- that's fine.  Since it's L2 for the main Kashy trooper we can make that L2 here.
let's focus on bringing out the camo so we get it looking more like this: