Commodore212 Posted November 8, 2019 Share Posted November 8, 2019 Hey guys I bought a biker scout belt and everything is working good but I am unsure of how to attach the plastic Pieces to the fabric belt part . The side boxes I’m pretty sure are riveted but do I rivet or E-6000 the buckle on? And is the buckle connected to the side boxes? I circled a part on the buckle in red, wondering if I should drill a hole there to put a rivet into. Thank you!https://www.dropbox.com/s/yvbx57onjynry5c/Photo Nov 07%2C 5 51 29 PM.jpg?dl=0 https://www.dropbox.com/s/izj3qleqsjki9ud/Photo Nov 07%2C 5 51 39 PM.jpg?dl=0 https://www.dropbox.com/s/3wlpmsqf0mdbo8e/Photo Nov 07%2C 5 51 43 PM.jpg?dl=0 Quote Link to comment Share on other sites More sharing options...
Commodore212 Posted November 8, 2019 Author Share Posted November 8, 2019 Also I don’t have rivets or a river gun is there anything else I could use? Quote Link to comment Share on other sites More sharing options...
Stroker Posted November 8, 2019 Share Posted November 8, 2019 I always e6000 the fabric belt to the plastic and then a rivet with a piece of extra plastic for backing. Heres a thread with some good info on a three piece belt. Also did the belt come with holes pre drilled like that? 1 Quote Link to comment Share on other sites More sharing options...
Stroker Posted November 8, 2019 Share Posted November 8, 2019 Also a rivet gun will run you less than 10 bucks at harbor freight and I think some Walmarts carry them. Then a pack of 1/8 rivets and rivet washers. 1 Quote Link to comment Share on other sites More sharing options...
Commodore212 Posted November 8, 2019 Author Share Posted November 8, 2019 The kit I got was made to have holes there and I E-6000d the 3 plastic pieces together as was instructed by another 501st member but I will rivet and glue the belt on. How are the thigh boxes attached in the back? Quote Link to comment Share on other sites More sharing options...
Stroker Posted November 8, 2019 Share Posted November 8, 2019 17 minutes ago, Commodore212 said: The kit I got was made to have holes there and I E-6000d the 3 plastic pieces together as was instructed by another 501st member but I will rivet and glue the belt on. How are the thigh boxes attached in the back? I would sew them on,but a lot of people rivet them on as well. Quote Link to comment Share on other sites More sharing options...
Commodore212 Posted November 8, 2019 Author Share Posted November 8, 2019 Is there a specific place to rivet them or is it just wherever on the belt it ends up? Quote Link to comment Share on other sites More sharing options...
Stroker Posted November 8, 2019 Share Posted November 8, 2019 29 minutes ago, Commodore212 said: Is there a specific place to rivet them or is it just wherever on the belt it ends up? Once you get the boxes setting where they need to be have someone mark the spot on the belt. You want the area where they are attached too be covered up by the thermal detonator. 1 Quote Link to comment Share on other sites More sharing options...
Stroker Posted November 8, 2019 Share Posted November 8, 2019 To give you a idea of what I mean. Now placement will vary from person to person. Took this front the thread I linked you up with. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.