Qebenner Posted September 10, 2019 Share Posted September 10, 2019 Title says it all, if anyone knows that info would be awesome! Thanks Quote Link to comment Share on other sites More sharing options...
Chopper Posted September 10, 2019 Share Posted September 10, 2019 There are only a few folks offering the DLT20A right now. Diamond State Props used to be the go-to maker, but they've closed up shop at the moment. Offhand, I know of two makers that offer the DLT20A -- Christopher Zuk at procoprint3d: https://www.procoprint3d.com/product-page/dlt-20a-edium-blaster-rifle I can confirm that the procoprint3d DLT20A is the one used in the CRL photos. The other one I've seen discussed here is Mando Makes Prop Services: https://www.facebook.com/MandoMakesPropServices/ I have not personally handled the Mando Makes DLT20A, but there are some detailed photos here: http://forum.501stpathfinders.com/index.php?/topic/20100-dlt-20a/&tab=comments#comment-182001 I hope that helps! Quote Link to comment Share on other sites More sharing options...
Qebenner Posted September 10, 2019 Author Share Posted September 10, 2019 I'll check them out thank you! I think it's time for me to get a bigger gun after having a few kids look disappointed in the scout pistol compared to an E-11 or a DLT-19 haha. Thanks for the help! Quote Link to comment Share on other sites More sharing options...
BikerScout007 Posted September 10, 2019 Share Posted September 10, 2019 2 hours ago, Beznerds said: I'll check them out thank you! I think it's time for me to get a bigger gun after having a few kids look disappointed in the scout pistol compared to an E-11 or a DLT-19 haha. Thanks for the help! Kids don't know their history! 1 Quote Link to comment Share on other sites More sharing options...
Dragon_a Posted September 10, 2019 Share Posted September 10, 2019 Are you looking for a completed item or files to print and make your own? Quote Link to comment Share on other sites More sharing options...
Qebenner Posted September 10, 2019 Author Share Posted September 10, 2019 The files would be definitely nice because one of my friends owns multiple 3d printers, but if not I'd be happy with the completed item. Thank you :) Quote Link to comment Share on other sites More sharing options...
pben Posted September 10, 2019 Share Posted September 10, 2019 I've got an EC-17 from Mando Makes and it's very well printed in ABS. Quote Link to comment Share on other sites More sharing options...
jadloc Posted September 12, 2019 Share Posted September 12, 2019 I had already done this research rather. Here's what I found: On Etsy: AprilStormProps Just Files DIY https://www.etsy.com/fr/listing/652211213/blastech-dlt-20-a-laser-fusil-blaster-de?ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=dlt-20&ref=sr_gallery-1-3&organic_search_click=1 Or ready to paint https://www.etsy.com/fr/listing/644085004/diy-blastech-dlt-20-a-laser-fusil?ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=dlt-20&ref=sr_gallery-1-2&organic_search_click=1 There are 3DPRINTINGFORGE https://www.etsy.com/fr/listing/682496366/star-wars-dlt-20-a-dlt-20-a-dlt-20?ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=dlt-20&ref=sr_gallery-1-4&organic_search_click=1&pro=1 I ordered it, it should arrive next week. I will try to make a topic on construction. other: https://www.imperialarms3d.com/product-page/star-wars-custom-reinforced-blastech-dlt-20a-long-barreled-blaster-rifle there are still some, but I can not find their names ... Quote Link to comment Share on other sites More sharing options...
Ewan_Giles09 Posted September 13, 2019 Share Posted September 13, 2019 There are only a few folks offering the DLT20A right now. Diamond State Props used to be the go-to maker, but they've closed up shop at the moment. Offhand, I know of two makers that offer the DLT20A -- Christopher Zuk at procoprint3d:https://www.procoprint3d.com/product-page/dlt-20a-edium-blaster-rifle I can confirm that the procoprint3d DLT20A is the one used in the CRL photos. The other one I've seen discussed here is Mando Makes Prop Services:https://www.facebook.com/MandoMakesPropServices/ I have not personally handled the Mando Makes DLT20A, but there are some detailed photos here: http://forum.501stpathfinders.com/index.php?/topic/20100-dlt-20a/&tab=comments#comment-182001 I hope that helps!My replacement DLT-20A, the one I eventually cleared, is from Mando Mercs and I can quite honestly say it's absolutely superbe. 3D printed, weathered also, deceptively light!! Abso'bloody'lutely brilliant! Can't recommend him enough.It's the one in the attached photo.Sent from my SM-G950F using Tapatalk 4 1 Quote Link to comment Share on other sites More sharing options...
Dragon_a Posted September 13, 2019 Share Posted September 13, 2019 I’ve just finished printing the one from April Storm. Have a look on CG Trader as they often have sales (unlike Etsy) https://www.cgtrader.com/3d-print-models/games-toys/toys/blastech-dlt-20a-laser-rifle-blaster-star-wars-esb-ig-88 Quote Link to comment Share on other sites More sharing options...
Barber Posted September 13, 2019 Share Posted September 13, 2019 I'm about 95% complete with printing from April Storms' files. They seem to be very good and detailed files to print from. Also a very good price point. I'm super happy with them so far. The only thing I have left to print is the barrel shroud and scope. Quote Link to comment Share on other sites More sharing options...
jadloc Posted September 17, 2019 Share Posted September 17, 2019 mine has just arrived. at first glance, it looks ok. The only thing that scares me is the handle, it looks too big. Do you have opinions? a topic will follow bisous, tendresse et chocolat 😜 Quote Link to comment Share on other sites More sharing options...
Ewan_Giles09 Posted September 18, 2019 Share Posted September 18, 2019 mine has just arrived. at first glance, it looks ok. The only thing that scares me is the handle, it looks too big. Do you have opinions? a topic will follow bisous, tendresse et chocolat Hi mate, glad yours has come through looking correct. If mine had arrived like that at the start then apart from the scary handle everything else would have been fine! Lol.Ps: chocolats Godiva j'espere. Sent from my SM-G950F using Tapatalk Quote Link to comment Share on other sites More sharing options...
Kochi Posted October 6, 2019 Share Posted October 6, 2019 Very nice Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.