Alessandro Posted August 24, 2019 Share Posted August 24, 2019 Hi all, i have a BSP armor kit and want to know if the strips on the abdomen side are ok. In the CRL is the size not specified, only " one diagonal raised strip". The black stripe belong on the back, i have to change that, but are the strips ok to be approved? Thanks for your help. Greetings Alessandro Quote Link to comment Share on other sites More sharing options...
KOtrooper Posted August 24, 2019 Share Posted August 24, 2019 Hi - you'd have to talk to your local GML about that. All approvals for basic are done at a local level. I cut the extra BSP strip off, added a shim, and glued it all back together. Your abdomen strip is pretty wide and out of proportion with the rest of the armor. I personally wouldn't approve it for basic as a GML. You'd most likely have to replace it if you went for Level 2. Quote Link to comment Share on other sites More sharing options...
ScaryGuy Posted August 24, 2019 Share Posted August 24, 2019 The BSP kit has an extra step in the diagonal strip that needs to be removed, that is required for basic. That’s why the CRL mentions “one raised strip”. Your GML asked us for advice so he’s aware of it. I also have a BSP kit, here you can see how I removed it on mine. Quote Link to comment Share on other sites More sharing options...
Alessandro Posted August 25, 2019 Author Share Posted August 25, 2019 Hi , thank you very much, will try to change it with help from the files from Theo. Greetings Quote Link to comment Share on other sites More sharing options...
ScaryGuy Posted August 25, 2019 Share Posted August 25, 2019 2 hours ago, Alessandro said: Hi , thank you very much, will try to change it with help from the files from Theo. Greetings If you need further assistance, make a thread in the Shoretrooper WIP section of the forum and post pictures of your progress so we can offer advice as you go along. Quote Link to comment Share on other sites More sharing options...
Alessandro Posted August 26, 2019 Author Share Posted August 26, 2019 Are the black stripe on the 2 sides of the strip ? Quote Link to comment Share on other sites More sharing options...
ScaryGuy Posted August 26, 2019 Share Posted August 26, 2019 12 minutes ago, Alessandro said: Are the black stripe on the 2 sides of the strip ? This is how it should look (on both sides of the ab section) Quote Link to comment Share on other sites More sharing options...
NegativeEleven Posted July 11, 2020 Share Posted July 11, 2020 My kit came with a similar setup. It had 2 pair of cover strips (one wide, one narrow), with very shallow return edge. I made molds to vac-form this deeper cover strip with step and sharper corners. Laid it over the soft pull on my ab plate and it dips further in, leaving room to attach back plate on top. I have some spare plastic here if anyone else is having this problem. PM me if you need one. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.