Spudley7 Posted May 16, 2018 Posted May 16, 2018 Hi this is a build I have just completed... and cleared with 501st UKG... My armourer advised me to share it here to aid other builders ... please delete and message me if this break any rules.... the kit I used was a 850 works v2... the quality of the pulls were shockingly poor and over pulled with very thin abs walls... I can only comment on the kit I received not the new 850 v3... Helmet eBay unknown builder... 2nd tear drop and new curved lens added... 850 v2 kit .... Plastic surgery required... Heavily altered on details collar rebuild, vents and edges sharpen up, forearms rebuild, ab plate rebuild, all straps/buckles replaced, belt boxes replaced, hand plates replaced, TD and Pringle scratch build used 850 Pringle detail, rear box details rebuilt, hip skirt plates scratch built.. was not a fun build but... wanted to stick at it... and over come the bugs this kit is known for ... as there is no prefect kit at the moment. Link for my instagram: https://www.instagram.com/pdjmoore7/ Links for my wife’s vlog on the Shoretrooper Pants : Will put some general overall build pic Below and then each armour section Sent from my iPhone using Tapatalk 3
BikerScout007 Posted May 16, 2018 Posted May 16, 2018 Nice job! And this is absolutely in the right place. Thanks for sharing!
Spudley7 Posted May 16, 2018 Author Posted May 16, 2018 Alterations on ab plate Cut out 850 details... back plate fill ... replace with 3D print and scratch build Lego/abs plastic filler details (car bumper repair filler) Back held by N52 magnets Sent from my iPhone using Tapatalk
Spudley7 Posted May 16, 2018 Author Posted May 16, 2018 Ammo pouch and ab mounting point ( inside velcro... waist line popper) Pvc trunking in ammo pouch to shape Sent from my iPhone using Tapatalk
Spudley7 Posted May 16, 2018 Author Posted May 16, 2018 Shins fillers, sanded, shaped. Straps 850 straps binned and new ones fitted. Sent from my iPhone using Tapatalk
Spudley7 Posted May 16, 2018 Author Posted May 16, 2018 Belt box, belt rear armour plate and hip plates accessories... Sent from my iPhone using Tapatalk
Spudley7 Posted May 16, 2018 Author Posted May 16, 2018 Top and belt : Imperial boots (have painted rear buckle as Montana gold Sahara biege (as armour) Boots Orcas Pants made using pics and info from armourer See YouTube link above in first post for quick talk on my wife’s vlog..... Neck seal imperialseamstres Excuse the excessive baby powder... Velcro added to stop TK style riding up... didn’t know it it would be an issue as ST have a higher collar Sent from my iPhone using Tapatalk
Spudley7 Posted May 16, 2018 Author Posted May 16, 2018 Upper sections.... bit of a mare! Collar various cut out extra Sent from my iPhone using Tapatalk
Spudley7 Posted May 16, 2018 Author Posted May 16, 2018 Helmet from eBay could be a possible recast... unsure 2nd tear drop and lens replace ... lens was heat fitted reheated and curve pushed in by hand above top left is how the helmet came ... Finished Sent from my iPhone using Tapatalk
Spudley7 Posted May 16, 2018 Author Posted May 16, 2018 Arms sharpen up details rebuild forearms with scratch build details like vents abs and rubber... Sent from my iPhone using Tapatalk
Spudley7 Posted May 16, 2018 Author Posted May 16, 2018 I hope to make a E22 kit in box at moment.. but for the moment have R1-E11 blaster Sent from my iPhone using Tapatalk
Spudley7 Posted May 16, 2018 Author Posted May 16, 2018 Voice unit is a TRamp ( Trooper amp) Sent from my iPhone using Tapatalk
Spudley7 Posted May 16, 2018 Author Posted May 16, 2018 Thanks hope this help others ... as this kit was a pigs ear... at the start... I would like to apply for a level 2 grade, but unsure how to go about this... or if costume is good enough I have tried to follow the CRL for level 2 and got guidance along the build but I know there are always adjustments and details people miss or forget. Regards Paul Sent from my iPhone using Tapatalk
Spudley7 Posted May 16, 2018 Author Posted May 16, 2018 Nice job! And this is absolutely in the right place. Thanks for sharing!thanks Sent from my iPhone using Tapatalk 1
BikerScout007 Posted May 16, 2018 Posted May 16, 2018 Thanks hope this help others ... as this kit was a pigs ear... at the start... I would like to apply for a level 2 grade, but unsure how to go about this... or if costume is good enough I have tried to follow the CRL for level 2 and got guidance along the build but I know there are always adjustments and details people miss or forget. Regards Paul Sent from my iPhone using Tapatalk Vanguard applications go in this link: http://forum.bikersc...p?showforum=160 There are only two others so far, so you can check their applications to know what you need! 1
TK8271 Rogue Trooper Posted May 17, 2018 Posted May 17, 2018 Great work Paul You now need to go to The Vanguard area and post up the required info. Before you do that though you need to add the 2 rectangle recess behind each shoulder strap box At first glance everything else looks great Sent from my iPhone using Tapatalk 1
TK8271 Rogue Trooper Posted May 17, 2018 Posted May 17, 2018 Like this Sent from my iPhone using Tapatalk 1
Spudley7 Posted May 17, 2018 Author Posted May 17, 2018 Like this Sent from my iPhone using Tapatalk no probs ninja details... hiding in plane sight Sent from my iPhone using Tapatalk
ScaryGuy Posted May 17, 2018 Posted May 17, 2018 Amazing work Paul, this is an insane kind of plastic surgery! Looking forward to your Vanguard application! 1
Spudley7 Posted May 17, 2018 Author Posted May 17, 2018 Added details Sent from my iPhone using Tapatalk
mr paul Posted May 18, 2018 Posted May 18, 2018 Added details Sent from my iPhone using Tapatalk Tremendous amount of work making that 850 kit presentable well done. May I advise you that your shoulder straps are facing backwards. The slanted edge to the teeth of the straps should be facing forwards. 2
Spudley7 Posted May 18, 2018 Author Posted May 18, 2018 Tremendous amount of work making that 850 kit presentable well done. May I advise you that your shoulder straps are facing backwards. The slanted edge to the teeth of the straps should be facing forwards. Thanks straps to wrong way round Also wrong buckle .... thanks Sent from my iPhone using Tapatalk 1
TK8271 Rogue Trooper Posted May 18, 2018 Posted May 18, 2018 Yea , Swap your buckles over as advised , shins to shoulder and shoulder to shins 😉 Sent from my iPad using Tapatalk 1
Spudley7 Posted May 19, 2018 Author Posted May 19, 2018 My bad with the buckles.. chest straps... with sort Sent from my iPhone using Tapatalk 1
Spudley7 Posted May 20, 2018 Author Posted May 20, 2018 Collar line added carved in and weathered Straps chest 180 rotation and buckle change over between shins and chest Square tab chest and round tab shins Sent from my iPhone using Tapatalk 1
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now