sibbel29 Posted February 12, 2018 Posted February 12, 2018 hey guys, I am working on my RS bucket, which is my first helmet built. I trimmed the pieces roughly a couple of weeks ago and from this week on, I try to work on it every evening for a bit.. right now I am sanding the edges and try to line up both halfs, which is though.. I don’t want to have a huge crack between them.. wish me luck!! questions: when I have a tiny crack left, can I fill this with polyester putty and sand it etc? why oh why did RS not make square opening on the side of the visor for the bolts... I will dremel them with a precisonpiece , but hey that would have saved me some time.. hahaha keep you updated!! Verzonden vanaf mijn iPhone met Tapatalk 3
762s Posted February 12, 2018 Posted February 12, 2018 hey guys, I am working on my RS bucket, which is my first helmet built. I trimmed the pieces roughly a couple of weeks ago and from this week on, I try to work on it every evening for a bit.. right now I am sanding the edges and try to line up both halfs, which is though.. I don’t want to have a huge crack between them.. wish me luck!! questions: when I have a tiny crack left, can I fill this with polyester putty and sand it etc? why oh why did RS not make square opening on the side of the visor for the bolts... I will dremel them with a precisonpiece , but hey that would have saved me some time.. hahaha keep you updated!! <snip><snip><snip><snip> Verzonden vanaf mijn iPhone met Tapatalk awesome!!! i love seeing rs helmets being built makes me want to order another one its look pretty good from what i can see in the pics, you have a nice line with the two halves of the helmet too ... i hope you didnt go to far past the trim lines rs provided, this will shrink the helmets width and you will have to carry that width over to the visor and it will make it tough to get the face plate to sit correctly. anyways, to answer your question ... i would leave it as you have it and start adding the support strips to the inside. you have a nice small gap that will be easy to fill. and honestly, i would rather want to have a gap here and there to give the putty/bondo something more to adhere to than just a smooth shell. you may want to test the polyester putty on 2 pieces of scrap plastic before you fill the helmet. as well, wash/degrease the plastic just in case any contaminants are on the plastic that the polyester putty wont adhere too. the reason i suggest testing that putty is because there is a slight pull to open the helmet up when you put it on and off. i have one helmet that i used a softer putty on and it has started to crack on the seam, do to the slight pulling that is needed to get the helmet on and off, i like it though as its screen accurate ... and the other helmet i have i used straight bondo and it has yet to crack on the seam ... i have a 7 1/4" hat size head. dont use the hole/indent they provided for bolt holes, they are not right! make your own center mark and adjust the visor to sit correctly on the helmet if you need any help with the build post back here, check my rs build thread(click the link in my signature) or feel free to send me a message. i have helped a few through the process and i dont mind sharing what i have learned with my rs builds. look forward to seeing your progress, have fun with it and good luck! 1
sibbel29 Posted February 13, 2018 Author Posted February 13, 2018 awesome!!! i love seeing rs helmets being built makes me want to order another one its look pretty good from what i can see in the pics, you have a nice line with the two halves of the helmet too ... i hope you didnt go to far past the trim lines rs provided, this will shrink the helmets width and you will have to carry that width over to the visor and it will make it tough to get the face plate to sit correctly. anyways, to answer your question ... i would leave it as you have it and start adding the support strips to the inside. you have a nice small gap that will be easy to fill. and honestly, i would rather want to have a gap here and there to give the putty/bondo something more to adhere to than just a smooth shell. you may want to test the polyester putty on 2 pieces of scrap plastic before you fill the helmet. as well, wash/degrease the plastic just in case any contaminants are on the plastic that the polyester putty wont adhere too. the reason i suggest testing that putty is because there is a slight pull to open the helmet up when you put it on and off. i have one helmet that i used a softer putty on and it has started to crack on the seam, do to the slight pulling that is needed to get the helmet on and off, i like it though as its screen accurate ... and the other helmet i have i used straight bondo and it has yet to crack on the seam ... i have a 7 1/4" hat size head. dont use the hole/indent they provided for bolt holes, they are not right! make your own center mark and adjust the visor to sit correctly on the helmet if you need any help with the build post back here, check my rs build thread(click the link in my signature) or feel free to send me a message. i have helped a few through the process and i dont mind sharing what i have learned with my rs builds. look forward to seeing your progress, have fun with it and good luck! thanks buddy, I really appreciate it!!!! keep you posted and let you know when I have any questions! cheers.. Verzonden vanaf mijn iPhone met Tapatalk 1
sibbel29 Posted February 13, 2018 Author Posted February 13, 2018 just sanded the edges of the two main pieces a bit more and taped them together again to see it fits.. tomorrow I cut the visor and the ears and make the slots for the elastic on the jaw. then sand the edges and in the meanwhile, thinking about making the 8th vent hole Verzonden vanaf mijn iPhone met Tapatalk 2
sibbel29 Posted February 15, 2018 Author Posted February 15, 2018 small WIP due to my lack of free time.. I cut the visor and started on the ears, it’s very scary cause the abs is quite thin on the faceplate and the ears. when I finish the ears, I cut the slots for the chinstrap and sand all the edges. then I start working on the returnedge and the 8th venthole. question: how did you guys fill the hole for the 8th venthole? thanks!! Verzonden vanaf mijn iPhone met Tapatalk 1
762s Posted February 15, 2018 Posted February 15, 2018 looking good. as for the 8th vent hole ... i filled all of mine with apoxie sculpt, 2 part clay compound, works really well as it doesnt harden to fast and you can use water to work the clay to get the indent right. good luck, keep us posted 1
sibbel29 Posted February 20, 2018 Author Posted February 20, 2018 update: cut the ears.. up next the slots for the chinstrap. just doing this step by step... Verzonden vanaf mijn iPhone met Tapatalk 1
762s Posted February 20, 2018 Posted February 20, 2018 looking good ... a little bit of fine tuning on the left ear and in the lens with some sand paper is all i can see/suggest are you going to fix the factory return edge on the bottom of the faceplate? 1
sibbel29 Posted February 21, 2018 Author Posted February 21, 2018 looking good ... a little bit of fine tuning on the left ear and in the lens with some sand paper is all i can see/suggest are you going to fix the factory return edge on the bottom of the faceplate? thanks brother! yeah, that is the plan, first making the slots for the chinstrap, then sanding and finetuning the the visor and earopenings ( the left one is just as big as the right one but the legt ear has some sort of bump, therefor it looks like its smaller, trying to fix this with a heatgun). then I will work on the returnedge and the 8th venthole.. 😎 want to do as good as possible Verzonden vanaf mijn iPhone met Tapatalk 1
sibbel29 Posted February 24, 2018 Author Posted February 24, 2018 worked on my returnedge and made the slots for the chinstrap... now sanding and finetuning all edges and working on the 8th venthole ( want to do this even though it scares the living poop out of me hahaha) keep you posted Verzonden vanaf mijn iPhone met Tapatalk 1
sibbel29 Posted February 26, 2018 Author Posted February 26, 2018 create the slot for the 8th venthole, taped a piece of ducttape on the inside. this week I’ll shape it and fill it with polyester putty. for the dimple I use a piece of metal tube which i press in the putty when it still soft. Verzonden vanaf mijn iPhone met Tapatalk 1
sibbel29 Posted March 9, 2018 Author Posted March 9, 2018 after a week of illness I picked up my built again.. I created the 8th venthole with putty and sanded and polished it the first time.. and put another layer of putty on it, which I ‘ll sand and shape and polish tomorrow.. what a job.. hahaaha Verzonden vanaf mijn iPhone met Tapatalk 1
sibbel29 Posted March 10, 2018 Author Posted March 10, 2018 second layer sanded and polished.. need to smoothen out those side edges Verzonden vanaf mijn iPhone met Tapatalk 2
762s Posted March 11, 2018 Posted March 11, 2018 your getting there ... like you said smooth out the edges of the 8th vent some more. round them off to match the others and i think youll be good in that area! 1
sibbel29 Posted March 11, 2018 Author Posted March 11, 2018 your getting there ... like you said smooth out the edges of the 8th vent some more. round them off to match the others and i think youll be good in that area! thanks bro ! done it and it looks good now unpainted, have to think its gonna have primer and toplayer spraypaint on it. I also made the first boltslot on my visor... will do the other one tomorrow: and thanks for the posts about the visor and the return edge, I have done already some work on them.. but the overall allignment of the visor is something I can do after I build the complete faceplate/visor.. first second slot and then make the connectionplates for the two dome halves.. Verzonden vanaf mijn iPhone met Tapatalk 3
sibbel29 Posted March 28, 2018 Author Posted March 28, 2018 an update after a couple of rough weeks: I glued the two halves together.. now I am going to glue the strips and then start filling the crack with putty.. Verzonden vanaf mijn iPhone met Tapatalk 1
Thezeroeffect Posted March 28, 2018 Posted March 28, 2018 Wow this looking good so far... it’s giving me a idea of what I’m getting into with my new RS, only difference is it’s been over trimmed on the main helmet (not by me) so that should be fun to fix í ½í¸€
Thezeroeffect Posted March 28, 2018 Posted March 28, 2018 awesome!!! i love seeing rs helmets if you need any help with the build post back here, check my rs build thread(click the link in my signature) look forward to seeing your progress, have fun with it and good luck! I’m definitely checking out your build thread, hopefully picking up my RS today so I’ll know the full extent of the over trim... 1
sibbel29 Posted April 5, 2018 Author Posted April 5, 2018 finished glueing the connection pieces in the main bucket.. now I can start finetuning the gap with putty.. then I’ll start on the visor. glueing, trimming etc.. we’re getting there! Verzonden vanaf mijn iPhone met Tapatalk 1
sibbel29 Posted April 6, 2018 Author Posted April 6, 2018 hardest part is over with ... looking good! thanks brother😎 Verzonden vanaf mijn iPhone met Tapatalk
sibbel29 Posted April 15, 2018 Author Posted April 15, 2018 update!! built the visor and finished it with putty and sanded it. Then I worked on the faceplate and put it together with the visor.. Only need to trim the edge on the side of the faceplate so it closes perfectly to the mainbucket and work a bit more on the returnedge. finally have to drill the holes in the mainbucket for the helmetbolts. I also worked on the mainbucket and filled it and shaped it with putty and sanded it .. I am stoked! The outcome is amazing! one edge needs a bit more work and the mainbucket needs sanding with very fine paper.. so a lot of progress in a few days time. I am happy how it turns out! this is the proof that you can built a bucket decently when you research and do your homework.. hopefully another update in a few days Verzonden vanaf mijn iPhone met Tapatalk 2
sibbel29 Posted April 17, 2018 Author Posted April 17, 2018 first fitting.. need to trim the visor a bit more. the right side locks perfectly, the leftside needs some trimming.also the faceplate edge and the return edge needs work update: I fixed the visor and both sides lock and isn’t touching the dome Verzonden vanaf mijn iPhone met Tapatalk 1
sibbel29 Posted April 22, 2018 Author Posted April 22, 2018 arrggh.. first of all.. screw you RS with your bad bad bad pulls... especially the faceplate and visor are very bad!! I am working on the faceplate edge, but because the faceplate is not symmetrical it doesn’t close the way I want. on the left side it closes perfecty, the rightside has a gap .. when I want to close the rightside a bit more, the leftside flares out.. It will work in the end, but this is by far the hardest part for me personally.. Verzonden vanaf mijn iPhone met Tapatalk
762s Posted April 23, 2018 Posted April 23, 2018 arrggh.. first of all.. screw you RS with your bad bad bad pulls... especially the faceplate and visor are very bad!! I am working on the faceplate edge, but because the faceplate is not symmetrical it doesn’t close the way I want. on the left side it closes perfecty, the rightside has a gap .. when I want to close the rightside a bit more, the leftside flares out.. It will work in the end, but this is by far the hardest part for me personally.. Verzonden vanaf mijn iPhone met Tapatalk well, there is something about the symmetry of these helmets that is off ... all my kits i have built need different work on the right side to get them to close properly, some very little work others needed major work. check out my build thread and youll see a heat method i use to get the visor to close. you can also, adjust the bolt hole in the helmet to get a better side profile line. looking good
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now