Atheris Posted January 23, 2018 Posted January 23, 2018 It's been a long time coming but here it goes! Helmet - Kropserkel Armor - Studio Creations Boots - Chris909 Gloves - Wampa Wear Flight Suit - Modified Red Kap (modified by myself) Cummerbund, Vest, and Cod Piece - Sewn by myself Took quite a few photos but if you need more be sure to let me know!
BikerScout007 Posted January 23, 2018 Posted January 23, 2018 Hold tight, buddy. We are still reeling from the sudden passing of our XO. But we'll get to you soon!
gmrhodes13 Posted January 24, 2018 Posted January 24, 2018 You are definitely in the queue, we will post findings once everyone has had a chance to look over your application, please bare with us. In the meantime could you add close up photos of your boots (soles & dog bones) front and rear of blaster and a measurement of your helmet screws. 1
Atheris Posted January 30, 2018 Author Posted January 30, 2018 Oh not a problem! I am a patient person and have been working on Lancer for a year now, so I can wait a little while longer. Sorry for the delay, here's those pictures you requested.
Strider Posted February 2, 2018 Posted February 2, 2018 Hi Atheris, thank you for your submission for Lancer. We've reviewed your gear and would ask you to make the following changes: - Please dial back some of the weathering. While there were some scouts that did have more pronounced weathering spots than others those spots were only used minimally and not all over the armor. - The TD tube should be medium gray. In your pictures it appears to be white(ish) - Helmet bolds should be 3m replicas - The cod piece should sit tighter at the botton and the chevron needs to sit lower - Butt flap should be wider Additional observations (at this time not required for this Lancer app): - Visible seam line on the bottom of the flak vest sleeves. - Slight weathering on blaster (the screen used blaster where not weathered) - Pouch flaps not covering top of pouches completely. - Black paint around snout is a little rough, also decal just above snout is on an angle. - Boots: Dog bones on boots appear too big, pointed on corner and loose. - Helmet: Large gap between faceplate and backplate of the helmet, right side, a little on left side also. - Excess material on the belt (below the last right box in particular).
Atheris Posted April 11, 2018 Author Posted April 11, 2018 <p>Sorry for not getting back to this sooner, I had quite a bit of life happening. Anywho here are the pictures to reflect the changes you requested. I look forward to hearing back from you!</p> <p>Â </p> <div></div> <div></div> <div></div> <div></div> <div></div> <div></div> <div></div> <div></div> <div></div> <div></div> <div></div> 1
Retrofire Posted April 11, 2018 Posted April 11, 2018 It’s good to hear from you Atheris! Life always comes first so no worries! We will review your changes/updates and get back to you. Stand by Pathfinder!
Strider Posted April 18, 2018 Posted April 18, 2018 Hi Atheris, thanks for your updates - almost there now just two points: - The chevron of the cod piece needs to be sewn lower (see initial observation) - The pouches should be about an inch apart from the last rib respectively Cheers
Atheris Posted April 19, 2018 Author Posted April 19, 2018 Will get this done tonight! I appreciate it!
BikerScout007 Posted June 1, 2018 Posted June 1, 2018 Will get this done tonight! I appreciate it! Where does this stand?
Recommended Posts