TK8271 Rogue Trooper Requesting Vanguard Status (APPROVED)

[TK8271 Rogue Trooper]

Vanguard application

 

KW Designs armour with resprayed to the correct colour Anovos helmet.

 

 

 

Helmet

 

. Helmet base color is Sahara Beige.

. Chin Cup and strap added (hard hat chin strap with cup with 3 cup cut outs).

. Lenses are curved.

. Second ridge on top of the tear drop that's sits against the lens must be present.

 

 

 

 

 

. (Optional) Under the blaster shield and above the lens, there is the black recess curve, at each end there are 3 oblong shaped recess each 5mm x 3mm.

. (Optional)The 6 closed vent slots on each side of the helmet are slightly angled forward towards the face.

. (Optional) Small rectangle recess at the top inner mandibles (optional).

. (Optional)The rear end of the ear plate is slightly angled forward towards the face.

 

 

Neck seal and Shirt

 

 

 

 

. The neck seal is dark grey/charcoal grey color.

. The neck seal and bib fitted zip that zips from top to bottom.

. The shirt is made from cotton jersey material and has a honeycomb shaped mesh material under the armpit running from the stitch seam and forward towards the chest.

. The neck seal and bib fitted zip that zips from top to bottom.

 

Chest

 

. Armour base color is Sahara Beige.

. Blue color is layered Ford Nordic Blue, and grey aging spray.

. Plastezote is desired for the foam, however plastezote material style is acceptable.

. The shoulder buckle has a slight different shape to the shin buckles. Pin bar closed and not split above the screw; Screw grove is covered and the rear lever bar is longer on length and the curve is slighter and more square than shin buckle.

 

 

 

 

 

. (Optional) The Buckles have a 25mm x 10mm x 6mm slot attachment fitted to the front buckle bar.

. (Optional)The Chest plate has a slot recess 27mm x 12 mm x 3mm for the buckles to slot into, the buckle sits 2-3mm above the chest plate.

 

Back Plate

 

 

 

 

. Armor base color is Sahara Beige.

. Plastezote is desired for the foam, however plastezote material style is acceptable.

. There is a small circle cut out approximately 5mm in diameter above and to the left hand side corner of the left large recess.

. There are 2 small square cut outs approximately 5mm x 5mm above and to the right hand side of the left large recess.

. There are 2 small rectangle raised greeblies directly above both large recess vents.

. There is a small recess on the bottom right side of the back plate.

. There is a rectangle shaped line cut recess on the edge of the back plate, positioned halfway down the right side.

. There are 2 small rectangle recess directly behind both raised shoulder strap slots.

 

 

There is a stepped ledge under the main back box

 

 

 

 

Abdomen

 

 

 

 

. Armour base color is Sahara Beige.

. Blue color is layered Ford Nordic Blue, and grey ageing spray.

 

 

 

Optional

 

Rear corset type with zip added to rear with covering back plate

 

 

Shoulders

 

 

 

 

. Armor base color is Sahara Beige.

. Blue color is layered Ford Nordic Blue, and grey ageing spray.

. White, color is Flat white , Matt white

. Black color is matte Black.

 

 

Biceps

 

 

 

 

. Armour base color is Sahara Beige.

. Right Bicep Red color is Toyota Red 3E5.

. Yellow color is Flat yellow.

 

 

Forearms

 

 

 

 

. Armour base color is Sahara Beige.

. Blue color is layered Ford Nordic Blue, and grey aging spray.

. Yellow color is Flat yellow.

 

 

Gloves and hand plates

 

 

 

 

. Armour color is Sahara Beige.

As pictures above Gloves are Endor and handplates are direct cast of original and coloured Sahara Beige

 

Belt

 

 

 

. Drop boxes and Buckle base color is Sahara Beige.

. Long dropbox is hinged.

 

 

Rear assembly

 

 

 

 

. Armour plate, Detonator and Drop Box base color is Sahara Beige as per above pics.

 

Hip Armour

 

 

 

 

. Armour base color is Sahara Beige.

. Plastezote is desired for the foam on the belt, however plastezote material style is acceptable. Plastic sheet for the armor on top.

 

 

Breeches

 

 

 

 

. Breeches have the correct stitching lines and the diamond shape pattern on the inside of the knee area.

. Breeches have two vertical rows of lace holes with black laces that run from beneath the outside of the knee to the bottom of the leg.

 

 

Shins

 

 

 

 

. Armour base color is Sahara Beige.

. The top layer on the rear raised cover strip ends under the top buckle strapping and the bottom layer continues to the top edge.

 

 

Boots

 

 

 

 

. Boots must be Orca Bay Brecon Chelsea Boots (Havana, Sand or Elk all acceptable when weathered correctly).

 

 

E22

 

 

 

 

. Base is based on S&T Airsoft sterling with closed working parts (no spring)

. Screws used are M4 x 25mm Allen screw/bolts and sunken Allen screws for power cylinders

. Sling is fitted with Talon quick release 25mm swivel.

 

[Griffin-X]

Thanks for your application Stefan! Stand by while the Level II Review team performs an evaluation. We'll let you know if there are any questions.

[Griffin-X]

Hi Stefan, your Shoretrooper is really outstanding and the attention to detail is spot on. We do have one question.

 

What material did you use for foam on the chest/back?

 

Plastezote is desired for the foam, however plastezote material style is acceptable.

[TK8271 Rogue Trooper]

Hi Stefan, your Shoretrooper is really outstanding and the attention to detail is spot on. We do have one question.

 

What material did you use for foam on the chest/back?

 

Plastezote is desired for the foam, however plastezote material style is acceptable.

 

Hi Jim

 

Bugger I thought I wrote that lol , maybe that was the issue I thought it but never wrote it

I used Plastazote front and back as per the original

[Griffin-X]

Thanks for the additional info Stefan and great job overall on your build and upgrades. The team are very pleased to award you with the Vanguard designation. Please send your action photo to Forest Ranger (Cheyenne). You will be the first trooper on the new Vanguard Wall. Congrats and well done!