Kosejonas Posted October 18, 2017 Share Posted October 18, 2017 Hey Lancer Review Team I've been working hard on this, and can't wait for you guys to reply FYI: The reason for the bund not being straight and fitted in the back, is cause I didn't have any help when putting it on Jonas Aas TB-11230 Nordic Garrison, Norway, Capital District Squad Armor & Helmet: Studio Creations Helmet decals: TrooperBay.com Undersuit: DIY Bund: UK Marcel's TD clips: Theclip.com Boots: UK Marcel's Gloves: MFX Balaclava: DIY Blaster: eBay.co.uk (This pic will be posted during the day, since I forgot to take a picture of it). I'm aware that the upper arm on the left hand side is too far back. These pictures was taken in a hurry before I left for work 1 Link to comment Share on other sites More sharing options...
gmrhodes13 Posted October 18, 2017 Share Posted October 18, 2017 Thank you for your application, could you also provide a few close up photos, cut outs in boots and armor greebles. We will get back to you once the team has reviewed 1 Link to comment Share on other sites More sharing options...
Kosejonas Posted October 19, 2017 Author Share Posted October 19, 2017 Thank you for your application, could you also provide a few close up photos, cut outs in boots and armor greebles. We will get back to you once the team has reviewed Hey Q, I have now updated my post with 4 new photos in the bottom. Pics of greeblies on the thermal detonator, upper arms and closeup's on the boots. Please inform me if you would like photos of anything else Link to comment Share on other sites More sharing options...
gmrhodes13 Posted October 23, 2017 Share Posted October 23, 2017 Hi Jonas thank you for the additional photos, we have reviewed and here are our findings: Firstly the black sections (mud flap, leg straps) are hard to see in the photos, I suggest taking photos with better lighting from the front/back Ear holes in helmet are a little rough, could use sandpaper to smooth them out Upper arm armor not in the same position There is a lot of staining on the cummerbund and pouches, looks more like a spilt cup of coffee, we advise washing and perhaps a very light weathering, a mist of black spray paint would be enough. Drop boxes are a little low Straps over your shoulder bridges should be the same colour as your drop box straps Black paint around snout on helmet is a little uneven Looks like the cod section has some curves added to it, should be straight sides Although a blaster is optional for basic approval it is a requirement for Lancer The chest/back straps should be a white cotton webbing Belt closure should be velcro and not plastic clips Could we have close up photos of your boot soles and cut outs. The soles look very dark and should be tan in color, also it looks as if you have missed some cut outs Link to comment Share on other sites More sharing options...
gmrhodes13 Posted October 25, 2017 Share Posted October 25, 2017 Can we also get a measurement on the bund rear closure. Link to comment Share on other sites More sharing options...
Kosejonas Posted October 25, 2017 Author Share Posted October 25, 2017 Can we also get a measurement on the bund rear closure. By that you mean the Velcro measurement, right? Of course. I will take a picture tonight Link to comment Share on other sites More sharing options...
gmrhodes13 Posted October 25, 2017 Share Posted October 25, 2017 By that you mean the Velcro measurement, right? Of course. I will take a picture tonight Correct Link to comment Share on other sites More sharing options...
Kosejonas Posted December 14, 2017 Author Share Posted December 14, 2017 I'm am so sorry for the wait guys. I've been on tour since 1st of November. Please don't wthdraw my application. I have a lot of troops today, tomorrow, and the whole weekend because of the premiere. So I will start on my Lancer Project next week 1 Link to comment Share on other sites More sharing options...
Retrofire Posted June 3, 2018 Share Posted June 3, 2018 Hi Jonas! Just wanted to touch base with you on this and see how things are going. Let us know if we can be of help or if you have any questions. 1 Link to comment Share on other sites More sharing options...
Kosejonas Posted June 17, 2018 Author Share Posted June 17, 2018 Hi Jonas! Just wanted to touch base with you on this and see how things are going. Let us know if we can be of help or if you have any questions. Hi buddy, I'm still working on it. It goes kinda slow in the summer because I work a lot. I've finished most of your requests, but have a few tiny details to work on. Will post new pictures soon 1 Link to comment Share on other sites More sharing options...
Retrofire Posted June 17, 2018 Share Posted June 17, 2018 Take your time bro! Just checking up on my Pathfinder fam to see if you needed anything. 1 Link to comment Share on other sites More sharing options...
Kosejonas Posted June 20, 2018 Author Share Posted June 20, 2018 Take your time bro! Just checking up on my Pathfinder fam to see if you needed anything. Thanks buddy! Appreciate it Link to comment Share on other sites More sharing options...
Recommended Posts