Skigro Posted October 9, 2017 Share Posted October 9, 2017 Hello everyone. I’m new here but I’ve been lurking around for a while and have not found any good threads showing off 3D printed helmets. So I figured I would post my progress for others to see. About two weeks ago I picked up a mono price maker select plus and decided I would start by printing Sean’s mk2 helmet files. I am having a blast with these. I have been printing non stop for the last week or so. Here’s a few pictures of my progress. I only have 4 parts left to print but I’ve run out of filament. So I have more on order. Once I have everything printed I’ll upload more pictures of the assembly and of the finishing of the helmet. I’m planning on using smooth-on xtc-3D. To smooth it and strengthen it. Then I’ll sand prime repeat. What is the best paint to use for the final color? Sent from my iPhone using Tapatalk 2 Quote Link to comment Share on other sites More sharing options...
TK8271 Rogue Trooper Posted October 9, 2017 Share Posted October 9, 2017 Nice work Quote Link to comment Share on other sites More sharing options...
BikerScout007 Posted October 10, 2017 Share Posted October 10, 2017 Very cool! Quote Link to comment Share on other sites More sharing options...
Skigro Posted October 21, 2017 Author Share Posted October 21, 2017 Finished printing all the parts and glued them all together. Took two rolls of filament and I’m not even sure how many hrs of printing, but it’s finally done. Next step is the smooth on xtc. That will smooth it out then I’ll prime it, sand it, sand it some more and then paint it. Sent from my iPhone using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
Gojira72 Posted December 6, 2017 Share Posted December 6, 2017 Wow, that looks really cool. I can't wait to get mine printed. Quote Link to comment Share on other sites More sharing options...
Skigro Posted December 13, 2017 Author Share Posted December 13, 2017 Started applying the XTC-3D to the helmet. Letting it cure then I’ll check it over and see if a second coat is needed. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
wannabeuk Posted December 16, 2017 Share Posted December 16, 2017 Looking really sharp. I'm a big fan of XTC. Quote Link to comment Share on other sites More sharing options...
Skigro Posted December 22, 2017 Author Share Posted December 22, 2017 Thanks wannabeuk. I love the stuff too. Really easy to use. So quick update. I haven’t done much. I had to do some repairs / upgrades to my printer so I haven’t been able to work on the helmet. Printer was jamming so I finally ordered the all metal hot end kit from micro Swiss and installed the y-axis tensioner I printed months ago. Printer is up and running so much better than before. In regards to the helmet I’ve sanded a bit and I finally got my paints in. So excited to get back to work on this. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
wannabeuk Posted December 26, 2017 Share Posted December 26, 2017 @skigro Microswiss is definitely one of the best upgrades for the i3 clones. I started out on a Wanhao myself. If you don't already, make sure you also have the flexible couplers for your Z axis motors. This will avoid Z wobble issues. Quote Link to comment Share on other sites More sharing options...
Skigro Posted December 28, 2017 Author Share Posted December 28, 2017 @skigro Microswiss is definitely one of the best upgrades for the i3 clones. I started out on a Wanhao myself. If you don't already, make sure you also have the flexible couplers for your Z axis motors. This will avoid Z wobble issues. I will look into those parts. I was going to be upgrading the filament extruder gears, the extruder lever and plate soon anyway, so I may pick up the couplers at the same time. Slow moving progress on the helmet, mainly due to the holidays and being sick. I also need to pick up some more sandpaper. Plus I have like 4 concurrent projects. I sunk a lot of time into my new modeling project the last few days. I didn’t have time for anything else. If anyone’s curious about my current projects... 3D printed Shoretrooper helmet (Sean k design) 3D printed Boba Fett helmet (RafalFett design) 3D printing R2-D2 (Mr Baddely design) Modeling Luke ROTJ v3 lightsaber I hope to get back on track with the shore trooper helmet this weekend. Sent from my iPhone using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
wannabeuk Posted December 29, 2017 Share Posted December 29, 2017 I will look into those parts. I was going to be upgrading the filament extruder gears, the extruder lever and plate soon anyway, so I may pick up the couplers at the same time. Slow moving progress on the helmet, mainly due to the holidays and being sick. I also need to pick up some more sandpaper. Plus I have like 4 concurrent projects. I sunk a lot of time into my new modeling project the last few days. I didn’t have time for anything else. If anyone’s curious about my current projects... 3D printed Shoretrooper helmet (Sean k design) 3D printed Boba Fett helmet (RafalFett design) 3D printing R2-D2 (Mr Baddely design) Modeling Luke ROTJ v3 lightsaber I hope to get back on track with the shore trooper helmet this weekend. Sent from my iPhone using Tapatalk R2 is a definite time-sink. You should probably invest in a CR10 S5 in order to avoid printing the dome in sections and the inevitable join lines. Quote Link to comment Share on other sites More sharing options...
Skigro Posted December 30, 2017 Author Share Posted December 30, 2017 R2 is a definite time-sink. You should probably invest in a CR10 S5 in order to avoid printing the dome in sections and the inevitable join lines. I was thinking that too. But I don’t have that kind of money. If I could find it cheap I’d pick one up. The wife would probably kill me though. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Skigro Posted February 18, 2018 Author Share Posted February 18, 2018 Finally got around to sanding and priming. Yesterday I started the filling and sanding process. I forgot how much I dislike sanding. I still have the dome to sanding and fill. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Skigro Posted February 24, 2018 Author Share Posted February 24, 2018 Did some more wet sanding and more filling today. Once the filler dries I’ll sand some more. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Skigro Posted March 5, 2018 Author Share Posted March 5, 2018 Update. I did some more sanding and then primed and applied the flat black. Now time to tape and start my Sahara beige. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Skigro Posted March 6, 2018 Author Share Posted March 6, 2018 I was able to get the Sahara beige on the helmet tonight. Looks pretty good. Now I need to work on the blast shield. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Skigro Posted March 6, 2018 Author Share Posted March 6, 2018 Removed the tape. Few spots of the black need a touch up from my terrible masking job. But overall looks pretty good. Not a time to weather. Anyone have a good tutorial on doing some weathering. This is my first time. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Skigro Posted March 8, 2018 Author Share Posted March 8, 2018 Started to scuff the edges and add some damage. It’s subtle but I think it looks decent. I felt terrible doing it after I tried to get the helmet smooth and get the paint perfect. Now I’m messing it all up and chipping away paint layers. Oh well. Now I need to add some washes and dirty it up. Any tips on that step? Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Skigro Posted March 8, 2018 Author Share Posted March 8, 2018 So I dirtied it up. Not sure how I feel about it. What do you guys think? Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
ScaryGuy Posted March 8, 2018 Share Posted March 8, 2018 I would say it could use a bit more black wash, but the camera lighting could make it appear lighter then it really is. Maybe a few darker areas would give it a dirtier look. Compare it with some ref pictures. How did you apply the wash? Did you wipe it off? Quote Link to comment Share on other sites More sharing options...
Skigro Posted March 8, 2018 Author Share Posted March 8, 2018 I used some acrylic burnt umber and black. I diluted them and then dipped a large brush in and painted it on in certain areas. Then let it sit a few minutes and wiped some off. Some spots I took a small brush and dropped it in the corners and let it drip down and collect and dry for 10 mintes or so. Just kept doing both all over until I got a good looking stain. I used mostly Brown all over but used a small amount of black to get darker tones. Used mostly black in the dome grooves. Used the paper towel I was wiping the brushes off on to add a little bit of dirty texture all over by dabbing or wiping it. I also took a sanding sponge to a few areas to soften some of the stains and tried spraying some water over certain areas and wiping it up. I’ve never done this before so I was just kind of making things up as I went. Lol It’s pretty dark IRL. Only thing I’m not too happy about is the right side jaw is blacker looking than the left. Left is more brown. I would say it could use a bit more black wash, but the camera lighting could make it appear lighter then it really is. Maybe a few darker areas would give it a dirtier look. Compare it with some ref pictures. How did you apply the wash? Did you wipe it off? Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
ScaryGuy Posted March 8, 2018 Share Posted March 8, 2018 Sometimes it’s hard to capture the amount of weathering with a camera, I can’t really see the difference between the left and right jaw. In some areas you can see you used a brush to apply it. I mostly used a sponge to apply the wash, and then used a paper towel to dab it off. Wiping will leave a trail so I wouldn’t use that too much. Quote Link to comment Share on other sites More sharing options...
Skigro Posted March 9, 2018 Author Share Posted March 9, 2018 I sanded down the nose and chin greeblies. Then used my airbrush for the first time ever. I was very excited but I still need play around with it more. Sent from my iPhone using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
Skigro Posted March 25, 2018 Author Share Posted March 25, 2018 Done with the weathering. Now I need to install the visor. This has been a fun build. Sent from my iPhone using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
Skigro Posted March 30, 2018 Author Share Posted March 30, 2018 So I finally decided to build the rest of the armor. I had only planned to do a helmet, but I love this armor so I’m printing the rest. I made some modifications to Sean’s files to make the center of the chest a little more accurate. I widened the center indentation. After I printed I decided I needed to make further modifications to it. So I will be printing it again. new design image below.. I wish I could get Sean’s original files that he created the STL files from. It would make things easier. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.