TK8271 Rogue Trooper Posted May 16, 2017 Share Posted May 16, 2017 Hero E22 I ordered a E22 from 3dpropsnl as I wanted to add lights to the E22 and his build looked the best option to accommodate the lights. You can order the weapon in kit form , where you sand and fill the parts yourself and of course assemble and paint. Or you can have it come fully completed , with the completed method you can still take the weapon apart and add the lights. What you must bare in mind when ordering, is that a fully completed build can take 6-8 weeks from the day you order, so please discuss this with Eelco Sengers. Eelco has excellent communication and is always opened to improving his build and during my build he informed me he had adjusted it twice for more accuracy The weapon arrived and I must say I was very pleased Great work and quality There where a few little things that I did change like replacing a couple of screws and replacing them with the correct hex bolt. Eelco now knows about this and intends to do the same. I replaced the power cylinders as Eelco makes his with screws and for me it took away the accuracy of everything else. Eelco's version u Replaced with Mark Shearman's cylinders 3mm LED's into the 3 tubes on the counter Drilled 5mm holes into the rear barrel stock for 5mm led Once in place I added red Perspex as a cover Drilled out the underside of the cover plate to accosted the 3mm leds Put through the LED's and attached it to the underside plate And then screw back the plate All wiring runs down the inside of the barrel and is connected to a battery which sits inside the butt. I fitted Miniature switch that sits inside the cheek adjuster for ease of use. Once all put back together this is the result 1 Quote Link to comment Share on other sites More sharing options...
the dirty trooper Posted May 17, 2017 Share Posted May 17, 2017 What power sourse are you using to power the LED's Stephan, a 9v Bty? Quote Link to comment Share on other sites More sharing options...
TK8271 Rogue Trooper Posted May 17, 2017 Author Share Posted May 17, 2017 What power sourse are you using to power the LED's Stephan, a 9v Bty? Yes mate , all connected to one 9v battery 1 Quote Link to comment Share on other sites More sharing options...
Griffin-X Posted May 17, 2017 Share Posted May 17, 2017 Awesome work on this blaster Stefan, very well done! 2 Quote Link to comment Share on other sites More sharing options...
haui Posted May 19, 2017 Share Posted May 19, 2017 Nice and yes it is very easy with elcos weapon. 2 Quote Link to comment Share on other sites More sharing options...
Burgs Posted May 27, 2017 Share Posted May 27, 2017 Nice work Sent from my SM-G930F using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.