patsfire32 Posted March 10, 2017 Posted March 10, 2017 Hello everyone, just wanted to see if anyone in here has Walt's armor and how it compares to SC's armor kit. I am on the smaller side (5'7" 145 lbs) so I wanted to see which one would be a better fit for me. Also which one is better in terms of accuracy and quality. Appreciate the feedback.
stasz Posted March 10, 2017 Posted March 10, 2017 I don't know if anyone has a finished WTF kit yet. It looks like he's starting to pull them, and some people are getting the belts now, but I think it's too early yet to have a good comparison of WTF and other makers. From what I've seen on his FB page, it looks really nice. In general, WTF makes really nice stuff and I'm excited to see another reputable maker tackling the scout, giving us another good source. I'm keeping an eye on his page as people start to receive their kits and put them together... 4
BikerScout007 Posted March 10, 2017 Posted March 10, 2017 It's pretty similar in accuracy to a SC. The chest is a little better and the belt is a one-piece. I wish the dropboxes were smaller. It seems only MonCal makes dropboxes the right size. 4
Stroker Posted March 10, 2017 Posted March 10, 2017 I know there was a lot of time put into it. However I wish they would have gotten it more accurate for folks here in the states. I figured they would have went the same route as the kids size biker which is pretty accurate. 1
cheesewhoopy Posted March 10, 2017 Posted March 10, 2017 I have his chest and belt both of which I like much more that the SC kit. I've seen the rest of his armor in person at his shop and it's top notch. The quality of ABS plastic he uses is fantastic and his pulls are super sharp. I have a photo of his chest compared to SC. There's much more dimension to his chest, which I like a lot better. Sent from my iPhone using Tapatalk 3
stasz Posted March 10, 2017 Posted March 10, 2017 Aaron, I wondered if it was WTF when you posted up your pre-clearance pics. It really is a nice, sharp sculpt and pull. My TI armor and chest box is WTF and I was really impressed with the quality of material he uses.
swagger Posted March 10, 2017 Posted March 10, 2017 One significant thing I really like about Walt's kit is that the whole belt is one piece. 2
BikerScout007 Posted March 11, 2017 Posted March 11, 2017 The biggest problem I have with most Scout chest pieces is that they are too long. And because the chest pieces are too long, everything else tends to get pushed down -- the pouches, the belt and the codpiece. To wear the costume properly you need the belt on your waist, across your belly button, and the pouches filling the gap between the belt and the chest piece. But that's hard to do when the chest piece is too long. Look at the scouts in this photo and see how high up the chest piece actually sits. 2
stasz Posted March 11, 2017 Posted March 11, 2017 One significant thing I really like about Walt's kit is that the whole belt is one piece. Jeff just posted in another thread that SC kits are now shipping with a one piece belt as well! 2
BikerScout007 Posted March 11, 2017 Posted March 11, 2017 Jeff just posted in another thread that SC kits are now shipping with a one piece belt as well! Oh good! Now we don't have to send some Scouts over to have a ....chat with him. 2
Stroker Posted March 11, 2017 Posted March 11, 2017 The biggest problem I have with most Scout chest pieces is that they are too long. And because the chest pieces are too long, everything else tends to get pushed down -- the pouches, the belt and the codpiece. To wear the costume properly you need the belt on your waist, across your belly button, and the pouches filling the gap between the belt and the chest piece. But that's hard to do when the chest piece is too long. Look at the scouts in this photo and see how high up the chest piece actually sits. Don't forget MC under boob...I suffer from that right now and a square neck... 3
BikerScout007 Posted March 11, 2017 Posted March 11, 2017 I never forget underboob, bro And yes the square neck is a problem. The movie neck was definitely round and as you can see from the photo, the armor sat very close to the neck. That might only be a gap of about an inch 3
BikerScout007 Posted March 11, 2017 Posted March 11, 2017 What book are those photos from? I think I got them from Star Wars Insider. I'd have to double check!
cheesewhoopy Posted March 11, 2017 Posted March 11, 2017 Aaron, I wondered if it was WTF when you posted up your pre-clearance pics. It really is a nice, sharp sculpt and pull. My TI armor and chest box is WTF and I was really impressed with the quality of material he uses. He posted a video of someone running over his armor with a car and it just popped back into place when they picked up. The ABS he uses is really nice. I highly recommend it. Sent from my iPhone using Tapatalk 1
Stroker Posted March 11, 2017 Posted March 11, 2017 He posted a video of someone running over his armor with a car and it just popped back into place when they picked up. The ABS he uses is really nice. I highly recommend it. Sent from my iPhone using Tapatalk Yes my wife's TI is from Walt just as he posted it's next to indestructible. 1
rottie Posted March 14, 2017 Posted March 14, 2017 It's really odd reading about yourself. Does anyone have the correct specs on the drop boxes. ? How I came up with the specs. I printed all the pics I could find. Sketched a scale on every picture and blew them up to be all the same size then I took a known part measured it and took that measurement and applied it to eat scale of the pictures So it's got to be close If someone has better info shoot me a pm!! Please!!! 2
Griffin-X Posted March 14, 2017 Posted March 14, 2017 It's really odd reading about yourself. Does anyone have the correct specs on the drop boxes. ? How I came up with the specs. I printed all the pics I could find. Sketched a scale on every picture and blew them up to be all the same size then I took a known part measured it and took that measurement and applied it to eat scale of the pictures So it's got to be close If someone has better info shoot me a pm!! Please!!! Hey Walt, good to see you. Hitup Constantin (Strider). He's done a ton of research and has a very close if not dead-on measurement. I'm sure he'd be glad to help. http://forum.bikerscout.net/index.php?showuser=80599 1
BikerScout007 Posted March 14, 2017 Posted March 14, 2017 It's really odd reading about yourself. Does anyone have the correct specs on the drop boxes. ? How I came up with the specs. I printed all the pics I could find. Sketched a scale on every picture and blew them up to be all the same size then I took a known part measured it and took that measurement and applied it to eat scale of the pictures So it's got to be close If someone has better info shoot me a pm!! Please!!! Better to be talked about than not talked about at all The boxes are tough to nail down. Gino and Constantin have come the closest. MonCal is probably a good second. SC is slightly too big. KS is outrageously too big. Walt, I think yours fall in between SC and MonCal. 1
koyuhelio Posted June 26, 2017 Posted June 26, 2017 I just received my WTF kit!! I came here today to search for some drop box info. Mine are huge!! I'll post pics when I get that far. Just barely started to trim and sand arm pieces. Seriously, huge. Sent from my iPhone using Tapatalk
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now