Canterbury Tail Posted October 9, 2016 Share Posted October 9, 2016 With the new Lancer standards having the following (optional) point - Two Part bund/cod with cod section not attached to the main bund. Optional but highly recommended How are people attaching the top part of their cod? Do they attach it to the belt or flight suit or are people attaching it via velcro to underneath the cummerbund at the bottom? Quote Link to comment Share on other sites More sharing options...
PropReplicator2 Posted October 9, 2016 Share Posted October 9, 2016 Mine is sewn onto the Cummberband. Alex Sent from my KYOCERA-E6560 using Tapatalk Quote Link to comment Share on other sites More sharing options...
tk1234 Posted October 9, 2016 Share Posted October 9, 2016 Sewn to the CB. Quote Link to comment Share on other sites More sharing options...
Stroker Posted October 10, 2016 Share Posted October 10, 2016 I'm using velcro and attaching it to the inside of the bund for now. Quote Link to comment Share on other sites More sharing options...
Dragon_a Posted October 10, 2016 Share Posted October 10, 2016 The ones from max's have the cod attached to the flak vest. Would that meet the new standard since its not the bund that it is attached to? Quote Link to comment Share on other sites More sharing options...
BikerScout007 Posted October 10, 2016 Share Posted October 10, 2016 He's talking 2 pieces, guys. So they wouldnt be attached to the bund at all. The screen scout cod pieces were sewn to the bottom of the vest and that's how Max's Sci Fi does them Mine is attached by velcro to my flight suit. 2 Quote Link to comment Share on other sites More sharing options...
Chef Posted October 10, 2016 Share Posted October 10, 2016 Yup, mine is attached via velcro to the bottom of the flak vest. 2 Quote Link to comment Share on other sites More sharing options...
Dragon_a Posted October 10, 2016 Share Posted October 10, 2016 The screen scout cod pieces were sewn to the bottom of the vest and that's how Max's Sci Fi does them I didn't know that's how the on screen ones were done. Looks like I'll be going to Max for my vest / cod then 1 Quote Link to comment Share on other sites More sharing options...
kayelbe Posted October 10, 2016 Share Posted October 10, 2016 I have mine attached with velcro to the vest. I cheated a little by just "unattaching" it from the bund and sewing a (probably) 8 inch wide panel together, which I then sewed to the cod top and then attach that with velcro to the vest. The "thong" strap has a buckle clip on the elastic and the other part of the clip is attached to a short strap sewn to the back of the vest. The buckle is then hidden behind the bund. 2 Quote Link to comment Share on other sites More sharing options...
BikerScout007 Posted October 10, 2016 Share Posted October 10, 2016 I have mine attached with velcro to the vest. I cheated a little by just "unattaching" it from the bund and sewing a (probably) 8 inch wide panel together, which I then sewed to the cod top and then attach that with velcro to the vest. The "thong" strap has a buckle clip on the elastic and the other part of the clip is attached to a short strap sewn to the back of the vest. The buckle is then hidden behind the bund. Whoa! You're going for extreme accuracy points! Good job Quote Link to comment Share on other sites More sharing options...
Dmorja Posted October 13, 2016 Share Posted October 13, 2016 Kevin, can you post a picture of that set up? It sounds like the buckle would squish certain areas when you sit. Quote Link to comment Share on other sites More sharing options...
kayelbe Posted October 14, 2016 Share Posted October 14, 2016 Whoa! You're going for extreme accuracy points! Good job Eh, doubt it was done my way, but it looks the part and doesn't pull my bund down when I move! Kevin, can you post a picture of that set up? It sounds like the buckle would squish certain areas when you sit. Not at all! The buckle is in the middle of my back, behind the bund. It sits kind of in the small of my back, I guess. Never feel it! Below are front/back shots I just took. I just finished making a repair or three, so please excuse the stray threads! FRONT Hopefully you can see my cheesy "extension" panel. If I were to make another cod (sure hope I don't have to!), I'd make it long enough to directly attach to the vest. I used velcro in case I want to separate it for washing. BACK You can see where the buckle hangs out. I can easily reach it to clip/un-clip. My vest fits well enough that I can leave the back velcroed and just slip it on like a (half) T-shirt. 1 Quote Link to comment Share on other sites More sharing options...
Dragon_a Posted October 15, 2016 Share Posted October 15, 2016 That's nice Quote Link to comment Share on other sites More sharing options...
StoutScout Posted October 18, 2016 Share Posted October 18, 2016 I just added some detail on my build thread about how I did this. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.