Ranger Zee Posted August 14, 2016 Share Posted August 14, 2016 (edited) Due to misunderstanding, my application stalled when I applied for Lancer in 2011. The next month the Blu-Ray came out and the Lancer specs changed. I became frustrated and assumed it wasn't going to happen. Now, five years and over 100 troops later, here we go. Name: Wayne Sullivan 501st ID: 9963 Garrison: Dewback Ridge Garrison Height: 6'2" Weight: 210 lbs Helmet: Altmanns Armor: MonCal Boots: Self made via boot tutorial Cummerbund: Self made Pouches: Self made Flak vest: Self made Gloves: Don't recall from 2011 Flight suit: Self made Blaster: kropserkel Original Application: http://forum.bikersc...indpost&p=70479 Edit: Please stand by. I found something I need to fix. Will have pics by tomorrow! Edited August 14, 2016 by Ranger Zee Link to comment Share on other sites More sharing options...
Ranger Zee Posted August 16, 2016 Author Share Posted August 16, 2016 Sorry for the false start. After I posted the pics I noticed a couple things that needed to be adjusted and I didn't want to waste your time pointing them out to me. Now we are ready for review! Thanks! Link to comment Share on other sites More sharing options...
BikerScout007 Posted August 16, 2016 Share Posted August 16, 2016 Thanks for your application! We will review and get back to you! Link to comment Share on other sites More sharing options...
BikerScout007 Posted August 25, 2016 Share Posted August 25, 2016 Okay man, here's your shopping list: 1) Your shoulder bells seem to be "popping off" your vest sleeves? Maybe zipties joins to the shoulder bridges or a tighter strap to pull them in closer? 2) The shoulder bell corners should be rounded off too 3) Your belt should be worn a bit higher to meet the bottom of your pouches, but then it would seem your bund would stick out below the belt? It seems it is doing that now so maybe a shorter bund is in order 4) And while on the bund -- is the close left over right? It should be right over left. That applies to the vest as well. 5) The codpiece is crumpling up at the bottom where it meets the strap. Maybe put some foam in there to keep that from happening. 6) Your pouch flaps seem to not be identical. The right flap is narrower than the left flap. 7) Makes sure your drop boxes are even on both sides in the next round of pics 8) Is that nylon webbing on your knee armor? Change that out for elastic. 9) Do the trap decals on your helmet have the black outline around them? If so they need to be swapped out. 10) Bolt holster rivets need to be silver and not white. 11) The scope on your blaster seems to be a bit skinny....is that how KS makes them? 12) And just overall for the next round of photos you'll want to pull up the bicep armor and turn it forward, as well as bring up the forearms armor as well. Looking good! A lot of this stuff is nitpicky but hey, Lancer usually is Link to comment Share on other sites More sharing options...
Ranger Zee Posted November 27, 2016 Author Share Posted November 27, 2016 Thank you for the items to be corrected and the patience while I got it done! 1) Your shoulder bells seem to be "popping off" your vest sleeves? Maybe zipties joins to the shoulder bridges or a tighter strap to pull them in closer? -Replaced attachments with zip ties: 2) The shoulder bell corners should be rounded off too -Shoulder bells rounded: 3) Your belt should be worn a bit higher to meet the bottom of your pouches, but then it would seem your bund would stick out below the belt? It seems it is doing that now so maybe a shorter bund is in order 4) And while on the bund -- is the close left over right? It should be right over left. That applies to the vest as well. -Items addressed by making new, shorter cummerbund with correct velcro 5) The codpiece is crumpling up at the bottom where it meets the strap. Maybe put some foam in there to keep that from happening. -New detached foam-supported cod piece: 6) Your pouch flaps seem to not be identical. The right flap is narrower than the left flap. -New pouches made that are scaled to my size: 7) Makes sure your drop boxes are even on both sides in the next round of pics- -See full pictures at end: 8) Is that nylon webbing on your knee armor? Change that out for elastic. -Replaced with elastic: 9) Do the trap decals on your helmet have the black outline around them? If so they need to be swapped out. -Replaced decals: 10) Bolt holster rivets need to be silver and not white. -They were silver but didn't photograph well. Took new photo: 11) The scope on your blaster seems to be a bit skinny....is that how KS makes them? -Yes, that is how I received it from KS. 12) And just overall for the next round of photos you'll want to pull up the bicep armor and turn it forward, as well as bring up the forearms armor as well. -See new full photos: 1 Link to comment Share on other sites More sharing options...
BikerScout007 Posted November 30, 2016 Share Posted November 30, 2016 Thanks for the updates, Wayne! The staff will review Link to comment Share on other sites More sharing options...
BikerScout007 Posted December 1, 2016 Share Posted December 1, 2016 Congrats! See Announcements Link to comment Share on other sites More sharing options...
Recommended Posts